AV Wizard - Failed to setup X - can't download driver

[bushtech]

Hi all
I'm trying to update my graphics driver via command line. computer stuck - can only access terminal.

Using the example I got from here:http://wiki.linuxmce.org/index.php/Display_Drivers#X-windows_won.27t_start

= root@dcerouter:~# wget http://us.download.nvidia.com/XFree86/Linux-x86/<version>/NVIDIA-Linux-x86-<version>-pkg1.run

I've tried:
root@kkserver:~# wget http://us.download.nvidia.com/XFree8...nux-x86-256.53-pkg1.run

and:
root@kkserver:~# wget http://us.download.nvidia.com/XFree8...nux-x86-256.53.run-pkg1.run

Both connect OK but come back with : ERROR 404: not found

Am I doing something stupid? Please help a linux noobie
TIA

[Zaerc]

Try:

Code:

wget http://us.download.nvidia.com/XFree86/Linux-x86/256.53/NVIDIA-Linux-x86-256.53.run

(The URL can easily be found by right-clicking the "AGREE & DOWNLOAD" button on the final download page and choosing "Copy Link Location")

[bushtech]

Zaerc

Thanks for the reply. I've got the right url, tried it on another machine. The url also works on curl, but I can't get it to work with wget. I'm not sure where I'm going wrong

[bushtech]

OK
I see my link got truncated. I tried both these:
wget http://us.download.nvidia.com/XFree86/Linux-x86/256.53/NVIDIA-Linux-x86-256.53-pkg1.run/
wget http://us.download.nvidia.com/XFree86/Linux-x86/256.53/NVIDIA-Linux-x86-256.53.run/

I'm not very good with Linux commands and man wget is a big doc

[l3mce]

What chipset are you using?

I think there is an easier way to do this.

[bushtech]

Intel quad core q9550
mobo: asus P5P43TD

for standalone core

[arsenwengers]

mysql cannot connect through socket var,
I briefly saw the above message when restarting the the pc hope this is some use in finding a sollution to my problem.
Tried the various numbered keys and right and down arrows but these also do not work.

High, having some trouble getting linuxmce 8.10 up and running.
have istalled it on one pc fine.
After installation on the second pc i have had a black screen after one install/a white screen after another install, and when trying to force WVWizard on by holding down the shift key at start up i get red screen with cannot connect to X sever.

system below;(i hope this helps)

intel i7 cpu 950@3.07 ghz
Windows 7 64-bit(6gb ram)
geforce gtx 285(Nvidia)2gb
cuda cores:240
dedicated video memory 2048MB GDDR3
irq:24
i have x2 nics
tried disabling on board bios but did not know eactly what setting to change when in there,(need this explained in complete laymans terms....sorry)

[bushtech]

Latest on this saga:

Got myself a DVI to VGA connector, installed it, same result = AVWizard failed to setup X
Connected a second monitor to the VGA connector, so now 1 monitor on DVI/VGA and 1 on VGA port, ran it = same result

Reinstalled Lmce with 1 monitor connected to DVI/VGA. Install went fine to near the end  when a window popped up: KDE Daemon crash handler Fatal error, KDE Daemon (kded4) crashed and caused signal 11 SIGSEV. Clicked OK & inst. finished. Reboot = same result with text scrolling slowly past saying something about buffer I/O error.

Rebooted again, with second monitor attached, OK, no scrolling text but still ends in same result
Can now reboot OK without 2nd monitor but still always ends in same result.

Ran sudo apt-get update, sudo apt -get upgrade. Nothing downloaded. Linuxmce ver 2.6.27-15. Is this the latest?

Have tried the escape shift punching numbers thing - no effect. ( I never hear the start beeps, only the descending beeps at high speed)

Ok, so where do I go from here? :

Try to Install the latest nvidia driver as per first post? And then?

Curiously, if I look at the xorg.log file there's lots of stuff about my Samsung monitors, refresh rates etc but if I look at the xorg file itself theres just a bit of generic info in there, doesn't even say what type of monitor it is.

Could it be that it's not managing to update the xorg.conf file?

 It would really help if people who've heard the fat lady sing ( If you can see me etc) ( I've never heard it)can tell me what's going on here & where to go from here.
 
TIA

[l3mce]

Try

sudo apt-get install nvidia-glx-new

[tschak909]

Why are you even going through this?

The system should have the correct drivers, already.

-Thom

[bushtech]

Thanks for the help guys
i3mce: ran your instruction: said something about not available but referred to by another package.

Thom: I can't get to the AVWizard. Get stuck at the Failed to setup X screen. I have pressed shift - I have punched in numbers - nothing changes. Please remember that I don't hear the startup beeps, only the descending end ones - does this signify something?

[tschak909]

What graphics card are you using ?

-Thom

[bushtech]

Nvidia 8400 GS 512Mb DDR2 PCI-ex.

See my system on my bottom sig.

[bushtech]

From my xorg.conf:

Section "Device"
Identifier   "Device0"
Driver       "nvidia"
VendorName  "NVIDIA Corporation
EndSection

[l3mce]

To be clear... this core definitely IS online, yes?

ping google returns a result?

Is this a new install? Was the system ever functioning correctly?