Author Topic: 07/26 snapshot(fixed) - -No MD nas Media playback within LinuxMCE UI  (Read 1283 times)

rodercot

  • Guest
 
 Hi Everyone,

 Things have progressed much, hats off to the devs, I have been fiddling with 8.10 for a week or so in my spare time and today I setup a core in lieu of mythmaster backend with 4 TV cards one being an OTA for HD locally. I will get with that later.
 everything is up and running with the network and devices have been found. I have couple things I was wondering I am relearning as I go.

 1. How long is it gonna take to sync 13 2.0TB public windows-shares? This is working fine
 2. Does anybody have a copy of the media tagging video Thom made. Still Looking for this file.
 3. Could someone refresh my memory on the location needed for the channel changing script? Is this still /usr/bin/local or /usr/local/bin/ I have it back up somewhere
 4. I am setting up a new sharp Aquos 820 this time around. Should I mkae a new template for it or modify an old one. RS232 will be controlling it. Any Feedback on this Anybody.
 5. Finally any tips or links on setting up a ION330 as an MD. I did read a little but not too deep as I was heavily into the core. Seems to work just fine out of the box on the latest Snapshot as an MD

 I was reading somewhere on the forum, someone had mentioned a .id3 sharing site. has anything been done with that idea. I think it would be awesome and I may be way off but I am thinking that would be like tvdb or the mymovies upload method for movie info. I.E. I have all the Die hard movies id'd and someone needs them can they use my id file or would you still need to tag the files individually. I am not certain and I am wondering if this would be of any benefit. I am not looking forward to tagging my 2000 movies plus TV, HD and Music. LOL. No response to this idea - would it not be a useful tool for the masses.

 Thanks in advance gentlemen. Great work again it looks good.

 Regards,

 Dave

  
« Last Edit: July 28, 2010, 09:27:27 am by rodercot »

rodercot

  • Guest
Re: How long to Sync windows shares lots of data + a few more item ?
« Reply #1 on: July 25, 2010, 02:07:38 pm »
It's getting there on the sync. Since last nights post it had done most of the drives except two. Now granted. I had some go script files left in my unraid startup script and had to hard shutdown server and now it is doing a parity check (24-48 hrs) as well so that could have some relation.

rodercot

  • Guest
Re: How long to Sync windows shares lots of data + a few more item ?
« Reply #2 on: July 25, 2010, 10:18:56 pm »
Hey All,

 So I have trying to get a MD up and running all day. although I have setup an MD on two different machines both are producing the same results. I have no playback from any media files stored on my nas. Flickr is not working on either MD and sara is no where to be found during the av wizard setup.

 with the media playback my results are anything that is HD be it .ts, .mkv, .m2ts the system says it cannot find the file and that is the same with any of the audio files which are all flac. As for DVD's the error message is cannot read dvd or libdvdcss is not installed, libdvdcss is installed and the latest version. DVD's play fine from the disc drive just not from the lan. I read some notes on the forum regarding the smb.conf file and I checked that both on the core and the md's and those files are both correct.

 All files play just fine on the core.

 I reran createTBZ on the core in case and I also have deleted and rebuild the md's image. although I am not certain if that is even req'd any longer in 8.10. I cannot really locate any Md Setup info as per 8.10.

 if anyone can shed some light that would be awesome.

 Thanks,

 Dave

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5497
  • DOES work for LinuxMCE.
    • View Profile
Re: How long to Sync windows shares lots of data + a few more item ?
« Reply #3 on: July 25, 2010, 10:57:44 pm »
the media directors should be mounting /home, and devices in /mnt/device. Look in /home/public/data/videos
can you traverse the symlinked disks?

-Thom

rodercot

  • Guest
Re: How long to Sync windows shares lots of data + a few more item ?
« Reply #4 on: July 25, 2010, 11:32:00 pm »
Hey Thom,

 Thanks for the reply, Well I assume you a referring to the mounts on the MD. So if I open up /mnt/device with dolphin all the drives are there as device number 1-13 (50-62) not sure if this is a dolphin related issue but if I open the folder and watch; the drives are all there then they start to get removed one by one until they are all gone then it will refresh and put them all back again.

 There is nothing in home/public/data/videos, I did not use LinuxMCE directory structure when I setup the server on the core. The drives are all in the /home/public/data/other/ windows-share disk 1-13 device 50-62 on the core.

 I can also open zine from kde and browse to the /mnt/device/ directory and start a movie from there and it will play from the desktop, I can also open a file in mplayer of any extension and it will play but again about every third time I open the dialog box to pull up a movie file the /mnt/device drives are missing and will repopulate on there own.

 THX,

 Dave

  
« Last Edit: July 25, 2010, 11:48:59 pm by rodercot »

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5497
  • DOES work for LinuxMCE.
    • View Profile
Re: How long to Sync windows shares lots of data + a few more item ?
« Reply #5 on: July 25, 2010, 11:40:55 pm »
The behaviour you are experiencing is normal, and is caused by the interaction of autofs and a complex automounter control script (/etc/auto.PlutoStorageDevices). The devices come on and off as needed, and you'll see the interaction of these as UpdateMedia crawls the individual devices attached to the Pluto system.

If the disks are there, and the paths match up (look at the details page, at the path), then there is no reason for the behaviour you are experiencing at all.

-Thom

rodercot

  • Guest
Re: How long to Sync windows shares lots of data + a few more item ?
« Reply #6 on: July 26, 2010, 12:11:33 am »
 Right, so if from the orbiter on the MD I choose video and select the movie "A Night at the Museum" and look at the path it is

 File Public:other/Windows share-disk8[57] Movies8/A Night at the Museum. and if I compare that with

 /mnt/device the path is

 /mnt/device/57/Movies8/A Night at the Museum.

 My movie structure is all /Movie_Name/Video_TS/VOB1,2,3 etc...

 Dave
« Last Edit: July 26, 2010, 12:13:26 am by rodercot »

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5497
  • DOES work for LinuxMCE.
    • View Profile
Re: How long to Sync windows shares lots of data + a few more item ?
« Reply #7 on: July 26, 2010, 12:17:04 am »
the two paths are equivalent, due to symlinking.

-Thom

rodercot

  • Guest
Re: How long to Sync windows shares lots of data + a few more item ?
« Reply #8 on: July 26, 2010, 12:55:37 pm »
I should post some more info.  This is on an ION330 currenty testing.

 MD fstab file.

 
Code: [Select]
sambahelper@moon153:/etc$ cat fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>               <dump>  <pass>
proc            /proc           proc    defaults                0       0
/dev/fd0        /floppy         auto    user,noauto             0       0
/dev/cdrom      /cdrom          iso9660 ro,user,noauto          0       0
sysfs           /sys            sysfs   defaults                0       0

192.168.80.1:/usr/pluto/diskless/153    /                       nfs intr,udp,rsize=32768,wsize=32768,retrans=10,timeo=50 1 1
192.168.80.1:/usr/pluto/var/                    /usr/pluto/var/         nfs intr,udp,rsize=32768,wsize=32768,retrans=10,timeo=50 1 1
192.168.80.1:/usr/pluto/orbiter         /usr/pluto/orbiter      nfs intr,udp,rsize=32768,wsize=32768,retrans=10,timeo=50 1 1
192.168.80.1:/usr/pluto/keys                    /usr/pluto/keys         nfs intr,udp,rsize=32768,wsize=32768,retrans=10,timeo=50 1 1
192.168.80.1:/usr/pluto/deb-cache               /usr/pluto/deb-cache    nfs intr,udp,rsize=32768,wsize=32768,retrans=10,timeo=50 1 1
192.168.80.1:/var/spool/asterisk                /var/spool/asterisk     nfs intr,udp,rsize=32768,wsize=32768,retrans=10,timeo=50 1 1
#//192.168.80.1/home                            /home                   pluto-fuse-smb credentials=/usr/pluto/var/sambaCredentials.secret,nonempty,auto_cache 1 1
//192.168.80.1/home                             /home                   cifs iocharset=utf8,credentials=/usr/pluto/var/sambaCredentials.secret 1 1
sambahelper@moon153:/etc$

tail of DMESG

 
Code: [Select]
[    1.000603] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.001257] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.001603] TCP: Hash tables configured (established 131072 bind 65536)
[    1.001608] TCP reno registered
[    1.008205] NET: Registered protocol family 1
[    1.008397] checking if image is initramfs... it is
[    1.488438] Switched to high resolution mode on CPU 1
[    1.488517] Switched to high resolution mode on CPU 3
[    1.488609] Switched to high resolution mode on CPU 2
[    1.492082] Switched to high resolution mode on CPU 0
[    1.922813] Freeing initrd memory: 8312k freed
[    1.925965] audit: initializing netlink socket (disabled)
[    1.925997] type=2000 audit(1280138413.924:1): initialized
[    1.934425] highmem bounce pool size: 64 pages
[    1.934444] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.940393] VFS: Disk quotas dquot_6.5.1
[    1.940604] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.940828] msgmni has been set to 1752
[    1.941105] io scheduler noop registered
[    1.941110] io scheduler anticipatory registered
[    1.941114] io scheduler deadline registered
[    1.941143] io scheduler cfq registered (default)
[    1.968655] pci 0000:01:00.0: Boot video device
[    1.969423] isapnp: Scanning for PnP cards...
[    2.322493] isapnp: No Plug & Play device found
[    2.416528] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.422042] brd: module loaded
[    2.422205] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    2.422646] PNP: No PS/2 controller found. Probing ports directly.
[    2.424248] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.424264] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.428352] mice: PS/2 mouse device common for all mice
[    2.428698] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.428752] rtc0: alarms up to one year, y3k
[    2.429111] EISA: Probing bus 0 at eisa.0
[    2.429128] Cannot allocate resource for EISA slot 4
[    2.429145] EISA: Detected 0 cards.
[    2.429150] cpuidle: using governor ladder
[    2.429154] cpuidle: using governor menu
[    2.430168] TCP cubic registered
[    2.430221] Using IPI No-Shortcut mode
[    2.430756] registered taskstats version 1
[    2.430957]   Magic number: 2:979:22
[    2.431213] rtc_cmos 00:05: setting system clock to 2010-07-26 10:00:15 UTC (1280138415)
[    2.431221] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.431224] EDD information not available.
[    2.431495] Freeing unused kernel memory: 428k freed
[    2.431618] Write protecting the kernel text: 2584k
[    2.431698] Write protecting the kernel read-only data: 940k
[    2.724567] fuse init (API version 7.9)
[    2.757726] nbd: registered device at major 43
[    2.785279] processor ACPI0007:00: registered as cooling_device0
[    2.785292] ACPI: Processor [P001] (supports 8 throttling states)
[    2.785465] processor ACPI0007:01: registered as cooling_device1
[    2.785640] processor ACPI0007:02: registered as cooling_device2
[    2.785803] processor ACPI0007:03: registered as cooling_device3
[    2.829837] md: linear personality registered for level -1
[    2.837720] md: multipath personality registered for level -4
[    2.844818] md: raid0 personality registered for level 0
[    3.017314] md: raid1 personality registered for level 1
[    3.023560] xor: automatically using best checksumming function: pIII_sse
[    3.040546]    pIII_sse  :  6062.000 MB/sec
[    3.040551] xor: using function: pIII_sse (6062.000 MB/sec)
[    3.043963] async_tx: api initialized (async)
[    3.120718] raid6: int32x1    205 MB/s
[    3.188578] raid6: int32x2    305 MB/s
[    3.256598] raid6: int32x4    330 MB/s
[    3.324649] raid6: int32x8    375 MB/s
[    3.392624] raid6: mmxx1      454 MB/s
[    3.460558] raid6: mmxx2      885 MB/s
[    3.528569] raid6: sse1x1     444 MB/s
[    3.596554] raid6: sse1x2     797 MB/s
[    3.664532] raid6: sse2x1     875 MB/s
[    3.732543] raid6: sse2x2    1588 MB/s
[    3.732547] raid6: using algorithm sse2x2 (1588 MB/s)
[    3.732554] md: raid6 personality registered for level 6
[    3.732558] md: raid5 personality registered for level 5
[    3.732562] md: raid4 personality registered for level 4
[    3.786003] md: raid10 personality registered for level 10
[    4.568512] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    4.569830] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[    4.569847] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[    4.569859] forcedeth 0000:00:0a.0: setting latency timer to 64
[    4.570859] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:26:18:88:ad:1b
[    4.570869] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
[    4.663709] usbcore: registered new interface driver usbfs
[    4.663765] usbcore: registered new interface driver hub
[    4.663879] usbcore: registered new device driver usb
[    4.674021] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 18
[    4.674042] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 18 (level, low) -> IRQ 18
[    4.674071] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    4.674080] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    4.674206] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[    4.674257] ehci_hcd 0000:00:04.1: debug port 1
[    4.674267] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[    4.674299] ehci_hcd 0000:00:04.1: irq 18, io mem 0xfae7ec00
[    4.680077] No dock devices found.
[    4.684550] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.684851] usb usb1: configuration #1 chosen from 1 choice
[    4.684938] hub 1-0:1.0: USB hub found
[    4.684960] hub 1-0:1.0: 6 ports detected
[    4.697940] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.738618] SCSI subsystem initialized
[    4.786588] libata version 3.00 loaded.
[    4.895393] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 16
[    4.895410] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 16 (level, low) -> IRQ 16
[    4.895436] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    4.895442] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    4.895518] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    4.895555] ohci_hcd 0000:00:04.0: irq 16, io mem 0xfae7f000
[    4.951953] usb usb2: configuration #1 chosen from 1 choice
[    4.952012] hub 2-0:1.0: USB hub found
[    4.952033] hub 2-0:1.0: 6 ports detected
[    5.158149] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[    5.158167] pata_acpi 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
[    5.158228] pata_acpi 0000:00:0b.0: setting latency timer to 64
[    5.158256] pata_acpi 0000:00:0b.0: PCI INT A disabled
[    5.174561] ahci 0000:00:0b.0: version 3.0
[    5.174589] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
[    5.174774] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[    5.174785] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part
[    5.174796] ahci 0000:00:0b.0: setting latency timer to 64
[    5.175612] scsi0 : ahci
[    5.176005] scsi1 : ahci
[    5.176212] scsi2 : ahci
[    5.176378] scsi3 : ahci
[    5.176568] scsi4 : ahci
[    5.176827] scsi5 : ahci
[    5.177198] ata1: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72100 irq 223
[    5.177207] ata2: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72180 irq 223
[    5.177215] ata3: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72200 irq 223
[    5.177223] ata4: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72280 irq 223
[    5.177231] ata5: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72300 irq 223
[    5.177238] ata6: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72380 irq 223
[    5.332031] usb 2-1: new low speed USB device using ohci_hcd and address 2
[    5.561796] usb 2-1: configuration #1 chosen from 1 choice
[    5.660031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.740027] usb 2-2: new low speed USB device using ohci_hcd and address 3
[    5.957805] usb 2-2: configuration #1 chosen from 1 choice
[    5.969072] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133
[    5.969080] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.971340] ata1.00: configured for UDMA/133
[    6.264026] usb 2-3: new full speed USB device using ohci_hcd and address 4
[    6.479825] usb 2-3: configuration #1 chosen from 1 choice
[    6.483089] usbcore: registered new interface driver hiddev
[    6.495073] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input1
[    6.512231] input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:04.0-1
[    6.527957] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input2
[    6.532203] input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:04.0-1
[    6.546691] input: Microsoft Microsoft Wireless Optical MouseĀ® 1.00 as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/input/input3
[    6.552253] input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical MouseĀ® 1.00] on usb-0000:00:04.0-2
[    6.552296] usbcore: registered new interface driver usbhid
[    6.552303] usbhid: v2.6:USB HID core driver
[    6.856027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.860113] ata2.00: ATAPI: Slimtype DVD A  DS8A3S, HA24, max UDMA/100
[    6.861260] ata2.00: configured for UDMA/100
[    7.180025] ata3: SATA link down (SStatus 0 SControl 300)
[    7.500025] ata4: SATA link down (SStatus 0 SControl 300)
[    7.820023] ata5: SATA link down (SStatus 0 SControl 300)
[    8.140023] ata6: SATA link down (SStatus 0 SControl 300)
[    8.140232] scsi 0:0:0:0: Direct-Access     ATA      ST9320325AS      0002 PQ: 0 ANSI: 5
[    8.143535] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DS8A3S    HA24 PQ: 0 ANSI: 5
[    8.173253] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    8.173408] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    8.208267] Driver 'sr' needs updating - please use bus_type methods
[    8.217454] Driver 'sd' needs updating - please use bus_type methods
[    8.219140] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[    8.219185] sd 0:0:0:0: [sda] Write Protect is off
[    8.219192] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.219241] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[    8.219250] Uniform CD-ROM driver Revision: 3.20
[    8.219302] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.219534] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[    8.219552] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    8.219577] sd 0:0:0:0: [sda] Write Protect is off
[    8.219584] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.219668] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.219679]  sda: sda1 sda2 < sda5 >
[    8.321719] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.522729] RPC: Registered udp transport module.
[    8.522737] RPC: Registered tcp transport module.
[    8.577031] NET: Registered protocol family 17
[   12.583141] udevd version 124 started
[   13.548174] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   13.557820] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   13.627509] Linux agpgart interface v0.103
[   13.653651] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.897619] nvidia: module license 'NVIDIA' taints kernel.
[   14.173610] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 21
[   14.173629] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 21 (level, low) -> IRQ 21
[   14.176271] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[   14.176290] nvidia 0000:01:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
[   14.176308] nvidia 0000:01:00.0: setting latency timer to 64
[   14.177145] NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010
[   14.518852] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   14.545092] ACPI: Power Button (FF) [PWRF]
[   14.545323] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   14.577086] ACPI: Power Button (CM) [PWRB]
[   16.776408] lirc_dev: IR Remote Control driver registered, major 61
[   16.814377]
[   16.814385] lirc_mceusb2: Philips eHome USB IR Transceiver and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.44 $
[   16.814394] lirc_mceusb2: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>
[   17.157073] usb 2-3: reset full speed USB device using ohci_hcd and address 4
[   17.366967] lirc_dev: lirc_register_plugin: sample_rate: 0
[   17.378874] lirc_mceusb2[4]: SMK eHome Infrared Transceiver on usb2:4
[   17.379029] usbcore: registered new interface driver lirc_mceusb2
[   17.403531] ACPI: WMI: Mapper loaded
[   17.689555] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[   17.690834] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   17.690850] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
[   17.690861] hda_intel: Disable MSI for Nvidia chipset
[   17.690936] HDA Intel 0000:00:08.0: setting latency timer to 64
[   25.688323]  CIFS VFS: Error connecting to socket. Aborting operation
[   25.688336]  CIFS VFS: cifs_mount failed w/return code = -111
[   27.021222] NET: Registered protocol family 10
[   27.022919] lo: Disabled Privacy Extensions
[   27.333158]  CIFS VFS: Error connecting to socket. Aborting operation
[   27.333172]  CIFS VFS: cifs_mount failed w/return code = -111
[   27.895487]  CIFS VFS: Error connecting to socket. Aborting operation
[   27.895499]  CIFS VFS: cifs_mount failed w/return code = -111
[   33.689668] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   37.377513] eth0: no IPv6 routers present
[   50.449986] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[   50.449998] apm: disabled - APM is not SMP safe.
[   50.739992] lp: driver loaded but no devices found
[   50.861934] ppdev: user-space parallel port driver
[   52.546218] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   53.125625] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   53.126665] NFSD: starting 90-second grace period
[   55.317428] Bluetooth: Core ver 2.13
[   55.317653] NET: Registered protocol family 31
[   55.317660] Bluetooth: HCI device and connection manager initialized
[   55.317669] Bluetooth: HCI socket layer initialized
[   55.381045] Bluetooth: L2CAP ver 2.11
[   55.381061] Bluetooth: L2CAP socket layer initialized
[   55.405052] Bluetooth: RFCOMM socket layer initialized
[   55.405087] Bluetooth: RFCOMM TTY layer initialized
[   55.405094] Bluetooth: RFCOMM ver 1.10
[   55.433365] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   55.433379] Bluetooth: BNEP filters: protocol multicast
[   55.497203] Bridge firewalling registered
[   55.741607] Bluetooth: SCO (Voice Link) ver 0.6
[   55.741628] Bluetooth: SCO socket layer initialized
[  104.350175] Adding 4522256k swap on /dev/sda5.  Priority:-1 extents:1 across:4522256k
[ 2689.227748] eth0: too many iterations (6) in nv_nic_irq.
sambahelper@moon153:/etc$

 /mnt/device permissions on md

 
Code: [Select]
sambahelper@moon153:/mnt/device$ ls -l
total 0
drwxrwxrwx 1 root root 0 Jul 26 07:03 50
drwxrwxrwx 1 root root 0 Jul 26 07:03 51
drwxrwxrwx 1 root root 0 Jul 26 07:03 52
drwxrwxrwx 1 root root 0 Jul 26 07:03 53
drwxrwxrwx 1 root root 0 Jul 26 07:03 54
drwxrwxrwx 1 root root 0 Jul 26 07:03 55
drwxrwxrwx 1 root root 0 Jul 26 07:03 56
drwxrwxrwx 1 root root 0 Jul 26 07:03 57
drwxrwxrwx 1 root root 0 Jul 26 07:03 58
drwxrwxrwx 1 root root 0 Jul 26 07:03 59
drwxrwxrwx 1 root root 0 Jul 26 07:03 60
drwxrwxrwx 1 root root 0 Jul 26 07:03 61
drwxrwxrwx 1 root root 0 Jul 26 07:03 62

 I also found this thread and not sure if it related.
 
 http://forum.linuxmce.org/index.php?topic=9651.0

 thx,

 Dave
« Last Edit: July 26, 2010, 01:05:47 pm by rodercot »

rodercot

  • Guest
Re: Sync windows shares ? No MD Media playback within LinuxMCE UI
« Reply #9 on: July 28, 2010, 09:14:27 am »
 
 I got the latest snapshot and rebuilt the core and reset up the ion as an MD and I have a photo screensaver and network media is playing back for the most part all my audio files play fine as well as DVD's. Bd and hd-dvd 1080P ripped as .mkv or .ts files are not doing so well out of 100 movies about 3 seem to playback most are audio with no video or completely scrambled video and no audio.   

  Dave

« Last Edit: July 28, 2010, 09:20:50 am by rodercot »