Author Topic: will not install correctly at all, now doing my 17th install  (Read 28576 times)

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #60 on: June 03, 2010, 08:46:39 pm »
let me know if this works http://pastebin.com/xTS6BjmV never used it
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #61 on: June 03, 2010, 08:47:59 pm »
should i reboot and complete the wizards or wait
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5549
  • DOES work for LinuxMCE.
    • View Profile
Re: will not install correctly at all, now doing my 17th install
« Reply #62 on: June 03, 2010, 08:50:29 pm »
The install seemed to work correctly. Go ahead and reboot.

-Thom

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #63 on: June 03, 2010, 08:51:03 pm »
OK BRB
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #64 on: June 03, 2010, 09:07:00 pm »
At 70 percent of stage 1 in generating Orbiter. Network still has not internet, Skype is signed in I can even see who is online
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5549
  • DOES work for LinuxMCE.
    • View Profile
Re: will not install correctly at all, now doing my 17th install
« Reply #65 on: June 03, 2010, 09:12:48 pm »
are you using a crossover cable anywhere? if so, THROW IT AWAY.

-Thom

tekoholic

  • Veteran
  • ***
  • Posts: 96
    • View Profile
Re: will not install correctly at all, now doing my 17th install
« Reply #66 on: June 03, 2010, 09:14:37 pm »
Riggs, paste an lspci as well, if you could.

This sounds similar to the symptoms I had with my Realtek r8168 NIC being incorrectly detected and driven by the r8169 drivers.

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #67 on: June 03, 2010, 09:16:42 pm »
No all standard cat5 connected to the router
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #68 on: June 03, 2010, 09:21:06 pm »
imon@dcerouter:~$ lspci0:00.0 Host bridge: Intel Corporation 82955X Memory Controller Hub
0:01.0 PCI bridge: Intel Corporation 82955X PCI Express Root Port
0:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
0:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
0:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
0:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
0:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
0:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
0:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
0:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
0:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
0:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
0:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
0:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 01)
0:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
1:00.0 VGA compatible controller: nVidia Corporation GeForce 8600GT (rev a1)
3:00.0 Multimedia video controller: Conexant Systems, Inc. Device 8880 (rev 0f)
4:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
5:03.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
5:03.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
5:03.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
5:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
5:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
imon@dcerouter:~$
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #69 on: June 03, 2010, 09:26:55 pm »
Sorry about the past missing info down the left it wont work right on the Droid, I wish I could use kde on mce but the Res sucks at 720 for some reason.
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #70 on: June 03, 2010, 09:51:24 pm »
so to get internet on the latop I'm using Bitvise Tunnelier, to connect through ssh to LMCE and i have a socks proxy to IE so i will re paste LSPCI
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #71 on: June 03, 2010, 09:52:56 pm »
Linux dcerouter 2.6.27-17-generic #1 SMP Fri Mar 12 03:09:00 UTC 2010 i686

The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

To access official Ubuntu documentation, please visit:
http://help.ubuntu.com/
Last login: Thu Jun  3 14:37:20 2010 from 192.168.80.133
simon@dcerouter:~$ sudo lspci
[sudo] password for simon:
00:00.0 Host bridge: Intel Corporation 82955X Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation 82955X PCI Express Root Port
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (r
ev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express P
ort 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express P
ort 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Control
ler (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bri
dge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (re
v 01)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Co
ntroller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600GT (rev a1)
03:00.0 Multimedia video controller: Conexant Systems, Inc. Device 8880 (rev 0f)
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethe
rnet PCI Express (rev 01)
05:03.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
05:03.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
05:03.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
05:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
05:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Cont
roller (PHY/Link)
simon@dceroute
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #72 on: June 03, 2010, 10:03:32 pm »
so thats new any ideas why i can get internet by using a ssh tunnel for a proxy
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.

Kezza

  • Veteran
  • ***
  • Posts: 146
    • View Profile
Re: will not install correctly at all, now doing my 17th install
« Reply #73 on: June 04, 2010, 03:27:59 am »
Sorry not read all posts in detail but you replied to Thom - "No all standard cat5 connected to the router" but you had mentioned you were using one from core to laptop? No cross over should be needed in the setup.

Did you try core to laptop directly with standard network cable?

Riggs

  • Guru
  • ****
  • Posts: 185
    • View Profile
    • Kotonix LLC
Re: will not install correctly at all, now doing my 17th install
« Reply #74 on: June 04, 2010, 03:32:10 am »
one minute let me check the cable i used

If i remember right the two computers wont connect if its not a cross over cable
Dell XPS Gen5 P4 3.2Ghz 64 x2, 3Gbs Ram, GeForce 8600GT 1Gb VRam, Creative Audigy 2 ZS, LinuxMCE 10.04 32bit,, 2 Eth Cards, Comcast business 25Mbs/5Mbs. Zwave, X10, Vera 3.