Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Dap-P

Pages: [1] 2 3 ... 7
1
Users / Re: question about internet radio
« on: March 26, 2015, 10:00:40 pm »
I also dont know who made that page in the web-admin, but i made that script. I dont know if it is adapted to be used with the webadmin.

But the webadmin page is on my to-do list, please be patient a little longer.

Regards,
Dap-P

2
Users / Re: LinuxMCE suddenly rings
« on: December 23, 2014, 03:41:57 pm »
You could try to use 'netstat' and see where these connections are coming from.

If you dont have port 5060 forwarded, and you have a firewall rule, it must from somewhere in your internal lan, or from the core itself.


-Anton

3
Users / Re: Automatic adding Internet Radio streams to LinuxMCE
« on: November 17, 2014, 11:54:09 am »
Would you mind if we took what we there and added a simple interface in the web admin?

-golgoj4

Sure) If it is not finished by the time i have time  ;) , i will pick up where you guys left off.

Anton.

4
Installation issues / Re: 12.04 Client Machines Can't Browse Some Websites
« on: November 14, 2014, 01:43:40 pm »
MTU 576 is the minimum size for IPv6, maybe that has something to do with it?

I know IPv6 can automatically adjust the MTU size, for an unfragmented end-to-end connection

Anton.

5
Users / Re: NAS - FreeNAS, LMCE or something else?
« on: November 14, 2014, 01:24:00 pm »
I find the synology software very good. But the hardware is very expensive imho.

Recently i migrated my FreeNAS server to http://xpenology.com/ which is a x64 variant of the Synology software.
You can run this on any 64-bit PC, and in my opinion works perfectly.

Anton.


6
Users / Re: Automatic adding Internet Radio streams to LinuxMCE
« on: November 14, 2014, 01:02:51 pm »
What was the final disposition of this. Does someone want to make it into a formal device so users dont have to hit a forum to enable the feature?
-golgoj4

Soon i will have the time to finish this. in a couple months.


7
Users / Re: VPN (Need a place for my notes)
« on: February 10, 2014, 05:38:22 pm »
I am not sure if a VPN on the internal network will work in any circumstance, with this setup
Can you try from outside your LinuxMCE network?

Anton

8
Users / Re: VPN (Need a place for my notes)
« on: February 09, 2014, 06:15:44 pm »
After some more testing, these are my findings:

in /etc/ipsec.conf 2 lines need to change
rightsubnet=vhost:%priv into rightsubnet=vhost:%priv,%no
rightprotoport=17/%any into rightprotoport=17/0

If someone can test this (also with an iphone/ipad)
If it is not working on an apple device, can you add the following lines in the "conn L2TP-PSK" section of /etc/ipsec.conf
dpddelay=10
dpdtimeout=90
dpdaction=clear
And see if it is working?

ofcourse you need to enable the port in the firewall also,
iptables -A INPUT -m policy --dir in --pol ipsec -p udp --dport 1701 -j ACCEPT
to allow l2tp traffic out of the ipsec tunnel
and allow udp port 500 and 4500 in the webadmin

Anton

9
Users / Re: VPN (Need a place for my notes)
« on: February 09, 2014, 04:24:50 pm »
After some more research, the only thing that seems to need a change is the ipsec.conf.
Better said, only the last line in /etc/ipsec.conf
If you change that from
Code: [Select]
rightprotoport=17/%any to
Code: [Select]
rightprotoport=17/0 it seems to work for me.

i've tried changing the template (/usr/pluto/templates/ipsec.conf.tmpl) But if i then use the webadmin to configure things, it leaves me with an empty /etc/ipsec.conf file.

Is there somebody that can confirm changing this line is a working solution?

10
Users / Re: VPN (Need a place for my notes)
« on: February 03, 2014, 12:52:09 am »
I've been able to setup VPN with android clients, after some fiddling with the conf files

For now, i use these :
/etc/ipsec.conf http://paste.ubuntu.com/6864517/
/etc/xl2tpd/xl2tpd.conf http://paste.ubuntu.com/6864407/
(just replace the listen-addr with your external interface ip)

And a password without special characters in /etc/ppp/chap-secrets

Still need to find out what settings are actually necessary for the setup.

Anton

11
For wireless connectivity, perhaps this site can also help you:
http://www.cyberciti.biz/faq/debian-linux-wpa-wpa2-wireless-wifi-networking/

Anton

12
Users / VPN (Need a place for my notes)
« on: January 29, 2014, 03:52:50 pm »
Hi all,
I am trying to make VPN work, and i just need a place to put my notes, and perhaps sometimes some help/advice/testers
I dont have a lot of time, and my head is filled with a lot of things lately, so thats why i dump this here

This is what i know for now:

VPN is working if the Core has a public addressable IP, ie not 192.168.x.x, 10.x.x.x, 172.16.x.x
It is working with and without NAT, (protocol 50 or udp port 4500)

What you need to make it work:

In firewall, allow udp 500, udp 4500, and ip 50 (protocol 50)

And you need to accept 1701 out of the IPSEC tunnel:
iptables -A INPUT -m policy --dir in --pol ipsec -p udp --dport 1701 -j ACCEPT


There needs to be a ppp-up script that allows the remote end in iptables. Next time i work on VPN, i'll try to make it.
could be that just ifup ppp0 is enough -> need to test

It's possible that for devices to use 'internet' over VPN masquerading is needed:
iptables -t nat -A POSTROUTING -o eth0 -s 192.168.80.0/24 -j MASQUERADE


Conclusions:
- If VPN is working internally, it is working with a public outside ip
- Is setup with a private outside ip, 1701 traffic doesn't want to go through the ipsec tunnel, and thus failing
  This could be because i have only tested this with android clients, i need to try with windows, or mac (or linux)
- It's easiest to setup with firewall disabled.
- There is still some work that need to be done on scripting and automatic adding of firewall rules.


Anton

13
Users / Re: Audio - Multiple simultaneos outputs
« on: January 16, 2014, 02:01:41 pm »

14
Users / Re: Automatic adding Internet Radio streams to LinuxMCE
« on: January 12, 2014, 10:35:44 pm »
And again an update, this is fully functional for me.
Changed to a little different downloadurl, and put some some different filters in there.

In theory, what garagevibes sayd is possible, only i want this script to do all this automaticly.

Now, if only your country gets detected, the website should filter by popular stations.
Can you UK-based guys test this?

Anton

15
Users / Re: Automatic adding Internet Radio streams to LinuxMCE
« on: January 12, 2014, 08:59:42 pm »
Again, an update. I dont know if this is working for everybody, but i hope so

Anton

Pages: [1] 2 3 ... 7