Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - pointman87

Pages: 1 2 [3] 4 5 ... 8
31
Users / Re: Requesting Help (small wiring project)
« on: August 20, 2012, 05:28:07 pm »
Maybe a very dumb question but dont the pad have i charger cable that you can just put in the mold?

BR Daniel

32
Yes sir, after either upgrading alsa or installing backport and unmuting i get sound in avwizard (both the volume screen and the dolby and DTS test sounds)


33
Asrock 152B ION2:

lspci -nn | grep -w
Code: [Select]
'VGA' 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [ION] [10de:0a64] (rev a2)apt-cache policy linux-backports-modules-alsa-$(uname -r)
Code: [Select]
linux-backports-modules-alsa-2.6.32-40-generic:
  Installed: 2.6.32-40.41
  Candidate: 2.6.32-40.41
  Version table:
 *** 2.6.32-40.41 0
        500 http://archive.ubuntu.uasw.edu/ lucid-updates/main Packages
        500 http://archive.ubuntu.uasw.edu/ lucid-security/main Packages
        100 /var/lib/dpkg/status
aplay -l
Code: [Select]
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC892 Digital [ALC892 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

This device is using HDMI audio and play all formats (dolby digital,DTS etc)

Edit: this is my asound.conf
Code: [Select]
pcm_slave.spdif_convert48k {
pcm "spdif:%MAIN_CARD%"
rate 48000
}

pcm.spdif_playback {
type plug
slave spdif_convert48k
}

pcm_slave.hdmi_convert48k {
pcm "hdmi:%MAIN_CARD%"
rate 48000
}

pcm.hdmi_playback {
type plug
slave hdmi_convert48k
}

pcm.asym_spdif {
type asym
playback.pcm "spdif_playback"
capture.pcm "plughw:%MAIN_CARD%"
}

pcm.asym_hdmi {
type asym
playback.pcm "hdmi_playback"
capture.pcm "plughw:%MAIN_CARD%"
}

pcm.asym_analog {
type asym
playback.pcm "plug:dmix:%MAIN_CARD%"
capture.pcm "plughw:%MAIN_CARD%"
}

pcm.!hdmi {
        @args [ AES0 AES1 AES2 AES3 ]
        @args.AES0 {
                type integer
                # consumer, not-copyright, emphasis-none, mode=0
                default 0x04
        }
        @args.AES1 {
                type integer
                # original, PCM coder
                default 0x82
        }
        @args.AES2 {
                type integer
                # source and channel
                default 0x00
        }
        @args.AES3 {
                type integer
                # fs=48000Hz, clock accuracy=1000ppm
                default 0x02
        }
        type hooks
        slave.pcm {
                type hw
                card 1
                device 7
        }
        hooks.0 {
                type ctl_elems
                hook_args [
                {
                        name "IEC958 Playback Default"
                        lock true
                        preserve true
                        value [ $AES0 $AES1 $AES2 $AES3 ]
                }
                {
                        name "IEC958 Playback Switch"
                        lock true
                        preserve true
                        value true
                }
                ]
        }
}
Notice the code after pcm.!hdmi, i´ve never had to force nvidia card as 0 with this.

34
Users / Re: Prefix, dialplan in 1004
« on: August 03, 2012, 03:00:01 am »
Did you actually set a number for prefix in the webadmin setup? In my case i set a 0 (zero) So if im to dial number abcdef i dial 0abcdef

35
Users / Re: Prefix, dialplan in 1004
« on: July 31, 2012, 01:37:02 pm »
As for the prefix, a ticket is made for it: http://svn.linuxmce.org/trac.cgi/ticket/1509


36
Users / Re: Phonelines
« on: July 15, 2012, 05:30:15 pm »
http://svn.linuxmce.org/trac.cgi/ticket/1509

There's the ticket, thanks in advance.

Br Daniel

37
Users / Re: Phonelines
« on: July 15, 2012, 04:38:47 am »
Bump

38
Users / Re: Phonelines
« on: July 13, 2012, 10:41:10 pm »
Dooh, should have mentioned that i use 10:04 :S

39
Users / Phonelines
« on: July 12, 2012, 08:54:05 pm »
Hi all. Would it be possible to make it so users with only 1 phone line would not have to use a prefix? Reason I'm asking is that many phone can't handle auto appending a prefix. In my case i have a Doro IP880dect that can't do that, forcing me to dial a number rather that just call from the missed call list.

BR Daniel

40
For the bandwidth deprived. Rough idea of the size of these downloads? ???

The download for each upgrade are about 420-500MB

41
Hi L3mce, your script just finished upgrading my core and 4 MDs with very good result :)

42
Developers / Re: New Feature: On-Orbiter TV Guide, movies attached.
« on: June 11, 2012, 12:02:56 pm »
Hello all! Does the code for this still exist? If so could it would be neat to get this for 1004 =)


Best Regards

Daniel

43
Installation issues / Re: mce_usb2 ir blaster broke
« on: June 09, 2012, 03:56:48 pm »
People who have a problem with lirc due to the yavdr repo, might want to create/edit the /etc/apt/preferences file to contain the following lines:
Code: [Select]
Package: liblircclient0
Pin: version 0.8.6-0*
Pin-Priority: 1000

From that point forward, the liblircclient library will be the correct one. I will see that I can get the correct -dev package into our repo, to work with the yavdr liblircclient as well.

Thank you Posde, i use yaVDR for vdr-1.7.22 and the newer that Linuxmce-repo StreamdevClient, since it seems to work better on my install. I had frame drops on my MDs with the older version. Maybe the Linuxmce-repo could upgrade vdr and its plugins to?

BR Daniel

44
Installation issues / Re: mce_usb2 ir blaster broke
« on: June 09, 2012, 09:37:36 am »
The problem is solved! At the same time as i upgraded my MD i added the yaVDR repo to pull the latest vdr and plugins, in the process lirc got upgraded from the yaVDR repo. I think that was the problem. I rebuild the MD and upgraded it to the latest packages without yaVDR repo, and now it works again :D

45
Installation issues / Re: mce_usb2 ir blaster broke
« on: June 08, 2012, 03:15:44 pm »
Well... For about 2 year ago i plugged it in my bedroom MD and it have worked since ;)
I will take a photo of it and post here, that way you (Seth) can compare it to yours to see if they are similar. BUT... It doesn't work yet, it makes me so angry. Anyone know if lira updated recently? I think the problem is in lira, not in LMCE.

BR Daniel

Pages: 1 2 [3] 4 5 ... 8