Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - pointman87

Pages: 1 [2]
16
Installation issues / mce_usb2 ir blaster broke
« on: June 07, 2012, 05:13:03 pm »
On 17/5-12 i did apt-get update && apt-get upgrade, after that my mce_usb2 ir blaster stopped working. Do anyone know what happened around that time, or do anyone know where to start dig?

BR Daniel

17
Installation issues / AVWizard loop
« on: April 23, 2012, 07:09:10 pm »
I installed my headless core with LMCE-1004-20120413131325885, wish went so smooth that i couldn't believe my eyes, very great job with the LiveDVD L3mce.

Now to the problem. My livingroom MD with a nvidia GTX-560 are driving me nuts. I have installed nvidia-current through x-swat repo, the version is 295.40. When it is about the initialize X it unloads the nvidia module, causing Failed to setup X screen.
If i ssh to the MD on boot and modprobing the nvidia module X fires up and give me AVWizard. I complete it and get a fully working MD, BUT, if i reboot the MD I'm back a zero again, having to ssh, modprobe, complete AVWizard to be able to use the MD.

/etc/pluto.conf shows AVWizardOverride = 0
                              AVWizardDone = 1
                              FirstBoot = false

How do i get the MD to understand that AVWizard is done and not to touch the nvidia module?

BR, Daniel

18
Users / VDR stream issue
« on: March 03, 2012, 09:17:34 pm »
Hi everybody. I have a non LMCE specific problem with VDR and i can't find info anywhere so I'm trying here.

I can watch VDR for some time on my MD but after a while the stream freezes and the syslog on the MD starts to fill up with:


Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: last message repeated 4 times
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: last message repeated 2 times
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: last message repeated 5 times
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet


It continues like that until i turn off VDR. I then have to /etc/init.d/vdr restart on the core to be able to watch again.
Is someone else experiencing the same issue with VDR?

Best regards, Daniel

19
Users / Super 1004
« on: January 08, 2012, 11:08:17 am »
I just want to tell the community that i on my 1004 install with core and 3 MDs have work phones (in/out calls), working vdr with SC to all MDs, working lights with tellstick all media plays (exept for flash that laggs like hell) and 1 droid and 2 ios orbiters.

Thank you devs and maybe its 1004 release soon?  ;)

BR Daniel

20
Users / Plug & Play
« on: January 04, 2012, 09:07:39 am »
Im getting some strange behavior both in 8.10 and 10.04. On my living room MD i have attached a devon receiver, a LG tv, a tellstick, one gyration remote and a bluetooth dongle. The problem is that every time i reboot that MD, the tellstick, denon and LG are being rediscovered and I'm being kicked in to Sarah and have to reload, then it work until the next time i reboot. Does anyone have a similar behavior?

BR Daniel

21
Installation issues / Pluto-mplayer
« on: January 03, 2012, 11:23:35 pm »
I noticed that mplayer and pluto-mplayer isn't installed on any of my MDs in 1004, only pluto-mplayer-player. installing mplayer and pluto-mplayer made a couple of .mkv movies work with both video and audio.
So my question, should pluto-mplayer-player depend on pluto-mplayer and mplayer?

BR Daniel

22
Users / Asterisk Prefix
« on: December 30, 2011, 12:19:55 pm »
HI everybody and happy holidays or as we say in sweden, God Forts├Ąttning!

Im on 1004 and I configured my provider (affinity telecom) in phonelines and incoming calls are working as expected. Outgoing on the other hand aren't. Im getting dial tone when I'm dialing a number but the call don't arrive. My first clue is in asterisk log where i get [Dec 30 11:53:23] WARNING[26756] pbx.c: Don't know what to do with 'SIP/0X6X80X9X9-00000002'

I think as an outgoing call should look like sip:number you dial@provider server.
I noticed the option Prefix in phone lines menu, should i put something in there or is it unrelated to this error?

Best regards /Daniel

23
Users / Flashplayer
« on: November 05, 2011, 07:00:19 pm »
I have a problem which concerns all my MDs. When I'm trying to watch flash content In firefox or Hulu the picture is so choppy that it isn't watchable, the sound is all right thou. The problem are on both 8.10 and 10.04 so it doesn't seem to be version related. My MDs are one Acer Revo r3610 (ION) hooked up to a 40" Sony plasma at 1080p and hdmi audio, and one asus eeebox (ION2) hooked up to a LG 60" plasma through a devon 3310 receiver at 1080p. I have not tried to revert to 720p because i want to know if other people have the same problem. Im using the newest flash 11 from the repo.

Best Regards //Daniel

24
Installation issues / Alsaversion
« on: June 26, 2011, 11:20:39 am »
Hey all. I have been on 1004 for a couple of months now and downgraded back to 810, now to my issue.
Before i went 1004 i had audio over HDMI working out of the box on my acer revo r3610. Now i had to manually upgrade alsa to 1.0.23 to get HDMI audio work again. Is it something wrong with my install or has the alsa packages been downgraded for some reason?

Best regards Daniel

Pages: 1 [2]