Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - evilecho

Pages: 1 [2] 3
Users / Re: Diskless Media Director Volume
« on: January 21, 2011, 06:22:07 pm »
I had that some problem.... On the MD go into the Advanced Tab.... KDE Desktop. After that go into the Sound Manager.... I think PCM is the mixer that controls the sound for that, but I turned all of mine to max.

Yea.... after I posted I searched more and found the post about the Changeset 23588.... rather then do all the changes in the changeset .... I just changed 260 to 195 for the variable names and install piece and it worked like a charm. I wanted to make sure it worked before I posted again.... and it does work.

Also I didn't change line 162, basically I only change line 75.

_Nate (o:`,

Yes, after an update it was broken. What variable did you change in I changed param to "" in installCorrectNvidiaDriver(). That stopped the rebooting, but the resolution was wonky in the AVwizard. It looks like wants to "apt-get install nvidia-glx-260" but that package cannot be found. Any idea's?

This error just happened to me too. The system is stuck in an infinite reboot sequence after that error. I tried to boot into the recovery and do a package repair, that didnt do anything. I'm just kinda in a holding pattern now, trying to see what I can do without breaking it any more.

_Nate (o:`,

Users / Configuring TDM410p Card
« on: December 11, 2010, 08:57:47 pm »
Hello all,

   I am getting ready to setup my TDM410p card. I am trying to put a bunch of sources together and after I am done I plan on making a Wiki page after I get it done. To top it off.... I not used to working with all the extra config files that LMCE throws into the asterisk mix. My TDM card has 2 fxs modules (ports 1 and 2) and 2 fxo modules (ports 3 and 4). Port 3 is a U.S. lingo voip connection via hardware, and Port 4 is going to be a German Analog connection via a wall outlet.

So here is what I can deduce.... I need to apt-get install zaptel. (what about the dahdi) after that I need to configure the /etc/zaptel.conf file. Then switch Asterisk into manual mode via the LMCE admin. Add a dial rule.

This is where I am questioning what I am doing.... okay... actually this is where I am stuck.... I cant get a dialtone on my cisco 7961 ip phone. Any help would be greatly appreciated.

Another thing can I have different zones configured for the two different fxo ports?


Users / Cell Phone, Bluetooth and Asterisk? Anyone Done it?
« on: December 08, 2010, 07:08:28 pm »
I've done some searching and I have not be able to find anything about it. I don't know if it's because I am not using the right keywords.

Here is what I had in mind: After you get home, you charge your cell phone next to your LMCE server. The server then connects to the cell phone via Bluetooth. When someone calls your cell phone, your phones connected to your LMCE ring and allow you to answer the cell call.

Has anyone attempted this or made it work?


Users / Re: Not sure whats wrong.
« on: December 05, 2010, 09:35:32 pm »
Thanks, that helped, and I was able to get it working.

Users / Re: Not sure whats wrong.
« on: December 05, 2010, 01:16:22 am »
I was able to bring up a console and then I did the and the same thing happened. Are there some "Safe" settings I can manually input under the Media Directors device data fields to make it boot up w/o being blank.... I am running a JVC 52 Inch 1080p LCD TV.

Users / Not sure whats wrong.
« on: December 05, 2010, 12:17:20 am »
Hello all,
   I have a Hybrid core up and running great.... svn 23438. Everytime the Diskless MD boots, it boots to a blank screen. I can SSH into the MD after it boots, but it continues to have a blank screen after startup. I am running a XFX GeForce 7950 via Component. I can see the kubuntu splash, after that it becomes blank. The FAQ on the wiki was no help, I tried to run the /usr/pluto/bin/RebootWithAVWizard with no avail. I am open to any and all suggestions. Thanks.

_Nate (o:`,

Users / Re: Having issues with Diskless MDs and svn 23259 (0810)
« on: August 31, 2010, 11:02:55 pm »
I felt like I was spinning my wheels, so I reloaded with the latest svn (23260) and the same exact thing is happening.

Feature requests & roadmap / Re: LinuxMCE as a Samba Domain Controller
« on: August 31, 2010, 08:06:26 pm »
I didn't want to start a new topic, but has any of the dev's looked into this? I too think this would really help to make LinuxMCE more of the complete Home Automation Package.

Users / Re: Having issues with Diskless MDs and svn 23259 (0810)
« on: August 31, 2010, 07:40:18 pm »
Okay... after deleted, rebuilt and restarted the image/MD, I noticed that the nvidia patch failed to install after the first boot when it downloads new and updated packages. Every boot had an error when it was starting services with nvidia saying it could not parse the config file, it could not find the config file. After about 3 reboots it would just goto a blank screen. I noticed also that the nvidia verison on the MD was different then the one on the core... dont know if that makes a difference. Do I need to manually create a blank/standard config file for the MD? If so.... how. I tried deleting and rebuilding the image about 3 times with the same results. Thanks again.

Users / Re: Having issues with Diskless MDs and svn 23259 (0810)
« on: August 30, 2010, 09:56:21 am »
Okay I will try to rebuild the image when I get off of work today. I am assuming you deleted the image by deleting everything for the devices id in the /usr/pluto/diskless directory and you rebuilt the image from the webgui? Or did you have to run the twice? I did run this script once.

Thanks again.

Users / Having issues with Diskless MDs and svn 23259 (0810)
« on: August 28, 2010, 09:29:52 pm »
   At one time (I want to say one of the june snapshots) I was able to get the Diskless MD's working, now with the latest snapshot I cant get any diskless MD to work. Here is what happens; The MD boots and runs the diskless setup script, it completes and then it runs thru all the services. After that the TV flickers a few times and then it stops at the pxelinux.0 part of the bootup.... stalls and then there is the kubuntu shutdown splash screen. After it reboots and does the process all over again. This happens with both(all) my diskless MD's. One is an Asus M3A78-EM, with a Nvidia GT220. The other is a Jetway J7F2WE2G, with an Unichrome Pro. Each one of these boards only have one NIC, the intigrated ATI is disabled in the bios on the M3A78-EM, and I've done everything I can find on the wiki.
   Anyone out there able to help? If you need more info about anything, let me know.


Users / Re: Video Card Suggestion
« on: July 14, 2010, 09:14:53 pm »
I do have an ION board... but trying to make another one I already had work.

Pages: 1 [2] 3