Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Eypone

Pages: [1] 2
1
Users / Re: Good idea fore a New Core/Hybrid power usage around 30-60 watt ?
« on: April 05, 2011, 02:54:26 pm »
Okay thanks for the info:)
I was just not sure if the atom was strong enough or it should be an core 2 duo.

Thanks Tim
 

2
Users / Re: Good idea fore a New Core/Hybrid power usage around 30-60 watt ?
« on: April 04, 2011, 09:47:56 pm »
okay, i have seen that but not found any directly core/hybrid example.
could i use an
ASUS EEEBOX 1501U 1.6 2GB/250GB Intel Atom N330 1,6 GHz 1 MB,
when it is only an atom CPU ?

 

3
Users / Good idea fore a New Core/Hybrid power usage around 30-60 watt ?
« on: April 04, 2011, 08:18:01 pm »
Hi im looking for a smaller Core/Hybrid with power usage 30-60 watt.
It's only for one tv maybe in the future one MD.

My setup right now:
core/hybrid:
pentium 4
3gb ram
Nvidia 9600 gt
Usb-serial connected to receiver.
Sound using spdif to receiver
HDMI to receiver
I'm using Mythtv connecting to a Hd-Homerun.
4TB NAS.

New Setup thoughts is:
Small pc like an eee-pc, zotac or mac mini or something like that.
Usb-serial connected to receiver.
HDMI to receiver with both sound and video
Mythtv connecting to a Hd-Homerun.
4TB NAS.
Maybe an blu ray drive.

Fore my setup is it not necessary fore 2 NIC's
 
Hope some of you have a good idea for such core/hybrid :)

4
Users / Re: [SOLVED]VDR on MD Channel not available
« on: August 06, 2010, 09:00:34 am »
Hi Again, I found out it was VDR there was adding new channels to channels.conf.save.

Thanks for the help:)

5
Users / Re: VDR on MD Channel not available
« on: August 02, 2010, 08:34:54 pm »
Hey again, now have done a reinstall of the core.

I change this:

Core Setup.conf
Quote
streamdev-server.AllowSuspend = 1
streamdev-server.MaxClients = 6
streamdev-server.StartHTTPServer = 1
streamdev-server.StartVTPServer = 1
streamdev-server.SuspendMode = 1

and:
streamdevhosts.conf
Quote
127.0.0.1             # always accept localhost
#192.168.80.0/24     # any host on the local net
#204.152.189.113      # a specific host
#239.255.0.0/16       # uncomment for IGMP multicast streaming
0.0.0.0/0            # any host on any net (USE THIS WITH CARE!)

On MD i change:
Quote
streamdev-client.RemoteIp = 192.168.80.1
streamdev-client.RemotePort = 2004
streamdev-client.StartClient = 1
streamdev-client.StreamFilters = 1
streamdev-client.SyncEPG = 0


Core and MD I have createt the same Channels.conf.

Is there more i should change ?


This is what i get in syslog
Quote
Aug  2 20:32:00 moon34 vdr: [20807] switching to channel 1
Aug  2 20:32:00 moon34 vdr: [20807] ERROR: Streamdev: Couldn't check if 192.168.80.1:2004 provides ch$
Aug  2 20:32:00 moon34 vdr: [20807] info: Channel not available!
Aug  2 20:32:02 moon34 vdr-sxfe[20886]: [20926] [input_vdr] No data in 8 seconds, queuing no signal i$
Aug  2 20:32:02 moon34 vdr: [20807] max. latency time 3 seconds
Aug  2 20:32:10 moon34 vdr-sxfe[20886]: [20926] [input_vdr] No data in 8 seconds, queuing no signal i$





Thanks.

6
Users / Re: VDR on MD Channel not available
« on: August 02, 2010, 02:12:44 pm »
Hi again.
No it is only the last bit of getting vdr working on the MD.

But i just fund out that my channels.conf.save were deffrent from the channels.conf.
I just tried to change it, but I still have more programs in vdr than in, any of my channels.conf.
Do you know if thats becaurs of the transponder more channels on the same transponder?

But rigtig now I have another problem:
eypone@dcerouter:~$ sudo -s
sudo: /etc/sudoers is mode 0660, should be 0440

And My MD wont boot.

The only thing i have don is to add a rs232 for my Av !

Ill need to have a look on this before I can go any further.

7
Users / Re: VDR on MD Channel not available
« on: August 02, 2010, 11:27:15 am »
Hi again sorry for jumping over your question.
I follow this guide
http://wiki.linuxmce.org/index.php/VDR_Manual_Install

What changes did you do to the setup.conf on core and MD?

Core setup.conf i change
Quote
streamdev-server.AllowSuspend = 1
streamdev-server.MaxClients = 6
streamdev-server.StartHTTPServer = 1
streamdev-server.StartVTPServer = 1 (This one I didn’t find so I have not past it in to setup.conf)
streamdev-server.SuspendMode = 1


An when it did not work I tried
Quote
streamdev-server.HTTPBindIP = 192.168.80.1 instead of the 0.0.0.0
svdrpservice.ServerIp = 192.168.80.1 instead of the 0.0.0.0


MD setup.conf i change

Quote
streamdev-client.RemoteIp = 192.168.80.1
streamdev-client.RemotePort = 2004
streamdev-client.StartClient = 1
streamdev-client.StreamFilters = 0
streamdev-client.SyncEPG = 1


Core svdrphosts.conf I change the IP addressee to allow the access from my net.

Quote
127.0.0.1             # always accept localhost
192.168.80.0/24     # any host on the local net
#204.152.189.113      # a specific host
0.0.0.0/0            # any host on any net (USE THIS WITH CARE!)


Do you record/watch anything on the core during the problem?

No, I didn’t not record anything.
I tried to watch the same channel as the MD tried to stream/tune.
But I have also tried with vdr off on the core. 


Hope that can help.
Thanks alot for the help :)

8
Users / Re: VDR on MD Channel not available
« on: August 02, 2010, 08:47:16 am »
The channels.conf is the same, I just had a look.

I have 3 dvb-c tuners in my core.
1 x SATELCO
2 x Cinergy PCI HD.

The Cinergy tuner I need to load the driver for modprobe mantis, and reload vdr.

I dont now if this have something to do with it, but i did't this command in the end of the installation.
sudo echo “blacklist pcspkr” >> /etc/modprobe.d/blacklist

Is there any log I should look at ?

Thanks


9
Users / [SOLVED]VDR on MD Channel not available
« on: August 01, 2010, 09:41:35 pm »
Hi I need some help to to find out why I get this message on the MD, Channel not available.

I have setup the Channels.conf on the MD, the same way i have on my core/hybrid.

The VDR is working fine on the core/hybrid.


This is some of the setup.conf on the core

Quote
streamdev-server.AllowSuspend = 1
streamdev-server.HTTPBindIP = 192.168.80.1
streamdev-server.HTTPServerPort = 3000
streamdev-server.HTTPStreamType = 2
streamdev-server.IGMPBindIP = 0.0.0.0
streamdev-server.IGMPClientPort = 1234
streamdev-server.IGMPStreamType = 0
streamdev-server.MaxClients = 6
streamdev-server.ServerPort = 2004
streamdev-server.StartHTTPServer = 1
streamdev-server.StartIGMPServer = 0
streamdev-server.StartServer = 1
streamdev-server.SuspendMode = 0
svdrpservice.ConnectTimeout = 2
svdrpservice.ReadTimeout = 5
svdrpservice.ServerIp = 192.168.80.1
svdrpservice.ServerPort = 2001

This is the setup.conf
Quote
streamdev-client.HideMenuEntry = 0
streamdev-client.MaxPriority = 99
streamdev-client.MinPriority = -1
streamdev-client.RemoteIp = 192.168.80.1
streamdev-client.RemotePort = 2004
streamdev-client.StartClient = 1
streamdev-client.StreamFilters = 1
streamdev-client.SyncEPG = 1
svdrpservice.ConnectTimeout = 2
svdrpservice.ReadTimeout = 5
svdrpservice.ServerIp = 192.168.80.1
svdrpservice.ServerPort = 2001

and this is the channels.conf it is the same on the core as on the MD.
Quote
DR 1:346:M64:C:6900:2310:2311:2319:0:231:0:0:0
TV 2:346:M64:C:6900:2370:2371:2379:0:237:0:0:0
TV3:322:M256:C:6900:1720:1721:1729:0:1172:0:0:0
3+:514:M256:C:6900:1700:1701:1709:0:1170:0:0:0
TV 2 Zulu:514:M256:C:6900:1220:1221:1229:0:1122:0:0:0
DR 2:346:M64:C:6900:2320:2321:2329:0:232:0:0:0
DR Update:266:M256:C:6900:2510:2511:2519:0:1251:0:0:0
DR K:274:M256:C:6900:980:981:989:0:1098:0:0:0
DR Ramasjang:274:M256:C:6900:990:991:999:0:1099:0:0:0
DR HD:274:M256:C:6900:0:1651;1652:1659:0:1165:0:0:0
aalborg+:314:M256:C:6900:1010:1011:0:0:1101:0:0:0
24Nordjyske:314:M256:C:6900:1200:1201:1209:0:1120:0:0:0
NRK1:314:M256:C:6900:1340:1341:1349:0:1134:0:0:0
NatGeo HD :322:M256:C:6900:0:1541:0:1:154:0:0:0
VH1 Classic Europe :426:M256:C:6900:1460:1461:0:1:146:0:0:0
ZDF:418:M256:C:6900:1840:1841;1842:1849:0:1184:0:0:0
TV 2 Charlie :418:M256:C:6900:2030:2031:2039:1:203:0:0:0

Hope some one can help me out.
Thanks

10
Users / Re: PXE boot problem in 8.10
« on: August 01, 2010, 09:21:23 pm »
Hi, have you installed fro dvd ?

I think this is the solution.
To setup package to run diskless media directors
/usr/pluto/bin/Diskless_CreateTBZ.sh


11
Users / Re: Media Scenarios, problems with rs232 commands to receiver
« on: April 20, 2010, 11:34:37 am »
sorry for being a noob.
The * after power on * after changing inputs , where shuld I edit them ?

In this file 20_MarantzReceiver.sh or in Edit ruby codes.

12
Users / How to change what keys does on remote ? VDR EPG issue.
« on: April 18, 2010, 09:52:05 pm »
Hi, my issue is in VDR the red,green,yellow,blue and back buttons is not working in the EPG.

Insted the yellow is light and volume and i what it to reakt ind VDR instad of the linuxmce.

13
Users / Media Scenarios, problems with rs232 commands to receiver
« on: April 18, 2010, 08:05:35 pm »
Hey I having some issues with rs232 commands and Media Scenarios.

Audio Media Scenario:
What im trying to achiv, power on my receiver, setup receiver to stereo, sho file list.
What happens:
Power on my receiver and MH Play Media, but now Stereo

Tv Media Scenario:
What im trying to achiv, power on my receiver, setup receiver to Neural THX, MH Play Media.
What happens:
Power on my receiver and MH Play Media, but now Neural THX

All my rs232 commands ar working, i have tried to send them to the receiver thrug the linuxmce admin page.

What i think happens is the receiver is getting the Stereo or Neural THX command to fast after power comman to the resiver.

Is ther away to insert a break like 2 second befor sending the Stereo or Neural THX command ?
exsample: Power on receiver, whait to seconds, Stereo , Show file list.

14
Users / Re: How to view Version of linuxmce! And upgrade it to the newest
« on: April 08, 2010, 02:47:11 pm »
Hey is this  not only for the dist-upgrade  ?

im only looking for update the linuxmce to the latest
Quote
root@dcerouter:~# apt-get update
Ign file: ./ Release.gpg
Ign file: ./ Translation-en_US
Ign file: ./ Release
Ign file: ./ Packages
Hit http://security.ubuntu.com intrepid-security Release.gpg
Ign http://security.ubuntu.com intrepid-security/main Translation-en_US
Hit http://archive.ubuntu.com intrepid Release.gpg
Ign http://archive.ubuntu.com intrepid/main Translation-en_US
Hit http://packages.medibuntu.org intrepid Release.gpg
Ign http://packages.medibuntu.org intrepid/free Translation-en_US
Hit http://us.archive.ubuntu.com intrepid Release.gpg
Ign http://us.archive.ubuntu.com intrepid/main Translation-en_US
Ign http://security.ubuntu.com intrepid-security/restricted Translation-en_US
Ign http://security.ubuntu.com intrepid-security/universe Translation-en_US
Ign http://security.ubuntu.com intrepid-security/multiverse Translation-en_US
Hit http://security.ubuntu.com intrepid-security Release
Ign http://deb.linuxmce.org intrepid Release.gpg
Ign http://deb.linuxmce.org intrepid/beta2 Translation-en_US
Ign http://archive.ubuntu.com intrepid/universe Translation-en_US
Ign http://archive.ubuntu.com intrepid/multiverse Translation-en_US
Ign http://archive.ubuntu.com universe Release.gpg
Ign http://archive.ubuntu.com universe/main Translation-en_US
Ign http://archive.ubuntu.com universe/non-free Translation-en_US
Ign http://archive.ubuntu.com universe/contrib Translation-en_US
Hit http://archive.ubuntu.com intrepid Release
Ign http://us.archive.ubuntu.com intrepid/restricted Translation-en_US
Ign http://us.archive.ubuntu.com intrepid/universe Translation-en_US
Ign http://us.archive.ubuntu.com intrepid/multiverse Translation-en_US
Hit http://us.archive.ubuntu.com intrepid-updates Release.gpg
Ign http://us.archive.ubuntu.com intrepid-updates/main Translation-en_US
Ign http://us.archive.ubuntu.com intrepid-updates/restricted Translation-en_US
Ign http://us.archive.ubuntu.com intrepid-updates/universe Translation-en_US
Ign http://us.archive.ubuntu.com intrepid-updates/multiverse Translation-en_US
Ign http://packages.medibuntu.org intrepid/non-free Translation-en_US
Hit http://packages.medibuntu.org intrepid Release
Hit http://www.avenard.org intrepid Release.gpg
Ign http://www.avenard.org intrepid/release Translation-en_US
Ign http://archive.ubuntu.com universe Release
Ign http://deb.linuxmce.org 20dev_ubuntu Release.gpg
Ign http://deb.linuxmce.org 20dev_ubuntu/main Translation-en_US
Ign http://deb.linuxmce.org replacements_debian Release.gpg
Ign http://deb.linuxmce.org replacements_debian/main Translation-en_US
Ign http://deb.linuxmce.org intrepid Release
Hit http://us.archive.ubuntu.com intrepid Release
Ign http://archive.ubuntu.com universe/main Packages
Hit http://us.archive.ubuntu.com intrepid-updates Release
Hit http://www.avenard.org intrepid Release
Ign http://deb.linuxmce.org 20dev_ubuntu Release
Ign http://deb.linuxmce.org replacements_debian Release
Hit http://security.ubuntu.com intrepid-security/main Packages
Ign http://archive.ubuntu.com universe/non-free Packages
Ign http://archive.ubuntu.com universe/contrib Packages
Ign http://deb.linuxmce.org intrepid/beta2 Packages
Hit http://packages.medibuntu.org intrepid/free Packages
Hit http://security.ubuntu.com intrepid-security/restricted Packages
Hit http://security.ubuntu.com intrepid-security/universe Packages
Hit http://security.ubuntu.com intrepid-security/multiverse Packages
Hit http://security.ubuntu.com intrepid-security/main Sources
Err http://archive.ubuntu.com universe/main Packages
  404 Not Found [IP: 91.189.88.40 80]
Hit http://archive.ubuntu.com intrepid/main Packages
Hit http://archive.ubuntu.com intrepid/universe Packages
Hit http://archive.ubuntu.com intrepid/multiverse Packages
Hit http://us.archive.ubuntu.com intrepid/main Packages
Err http://archive.ubuntu.com universe/non-free Packages
  404 Not Found [IP: 91.189.88.40 80]
Ign http://deb.linuxmce.org 20dev_ubuntu/main Packages
Ign http://debian.slimdevices.com stable Release.gpg
Ign http://debian.slimdevices.com stable/main Translation-en_US
Hit http://security.ubuntu.com intrepid-security/restricted Sources
Hit http://security.ubuntu.com intrepid-security/universe Sources
Hit http://security.ubuntu.com intrepid-security/multiverse Sources
Hit http://packages.medibuntu.org intrepid/non-free Packages
Err http://archive.ubuntu.com universe/contrib Packages
  404 Not Found [IP: 91.189.88.40 80]
Hit http://us.archive.ubuntu.com intrepid/restricted Packages
Hit http://us.archive.ubuntu.com intrepid/universe Packages
Hit http://us.archive.ubuntu.com intrepid/multiverse Packages
Hit http://us.archive.ubuntu.com intrepid/main Sources
Hit http://www.avenard.org intrepid/release Packages
Hit http://us.archive.ubuntu.com intrepid/restricted Sources
Ign http://deb.linuxmce.org replacements_debian/main Packages
Hit http://us.archive.ubuntu.com intrepid/universe Sources
Hit http://us.archive.ubuntu.com intrepid/multiverse Sources
Hit http://us.archive.ubuntu.com intrepid-updates/main Packages
Hit http://us.archive.ubuntu.com intrepid-updates/restricted Packages
Hit http://us.archive.ubuntu.com intrepid-updates/universe Packages
Hit http://us.archive.ubuntu.com intrepid-updates/multiverse Packages
Hit http://us.archive.ubuntu.com intrepid-updates/main Sources
Hit http://deb.linuxmce.org intrepid/beta2 Packages
Hit http://us.archive.ubuntu.com intrepid-updates/restricted Sources
Hit http://us.archive.ubuntu.com intrepid-updates/universe Sources
Hit http://us.archive.ubuntu.com intrepid-updates/multiverse Sources
Hit http://deb.linuxmce.org 20dev_ubuntu/main Packages
Hit http://deb.linuxmce.org replacements_debian/main Packages
Get:1 http://debian.slimdevices.com stable Release [1645B]
Ign http://debian.slimdevices.com stable/main Packages
Hit http://debian.slimdevices.com stable/main Packages
Fetched 1B in 11s (0B/s)
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/universe/main/binary-i386/Packages.gz  404 Not Found [IP: 91.189.88.40 80]

W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/universe/non-free/binary-i386/Packages.gz  404 Not Found [IP: 91.189.88.40 80]

W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/universe/contrib/binary-i386/Packages.gz  404 Not Found [IP: 91.189.88.40 80]

E: Some index files failed to download, they have been ignored, or old ones used instead.
root@dcerouter:~# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@dcerouter:~#

As you can se it fails to download some of the Packages.
Is ther any one who can tell me how to do an upgrade ? or shuld i reinstall with this link and the latest ISO http://linuxmce.iptp.org/snapshots/ ?

15
Users / Re: How to view Version of linuxmce! And upgrade it to the newest
« on: April 07, 2010, 08:17:37 pm »
Hi, thanks for the replay.

When I do  sudo dpkg -l \*pluto\* i get alot of info about the version.
fore exsample   pluto-xine-pla 2.0.0.44.10030, but i cant figure out how to see the version on the http://wiki.linuxmce.org if this is the latest version.


Is this site  http://deb.linuxmce.org/ubuntu/dists/ the right one to add from to the sources.list.
And how to see which folder to add to get the lates updates ?

 

Pages: [1] 2