Messages

76

Users / Re: New Version of the Dianemo iOS Orbiter

« on: May 08, 2012, 03:23:29 pm »

Ok, thanks, will do.
I am out atm, but as soon as i have time (and my wife can miss her phone for a few minutes ) i will test and report back.

Br,
Raymond

77

Users / Re: New Version of the Dianemo iOS Orbiter

« on: May 08, 2012, 02:40:51 pm »

Hi Andrew,

Thanks for the reply,
This is what happens in detail:
- it installs perfectly
- i set the connection details (with a unique Dev ID)
- i hit save
- i hit the orbiter tab on the tabbar
- the screen goes all black
- the phone returns to its regular icon-screen
then when i want to open the app again, it gives me a black screen and returns to its regular icon screen again.

I also have RoaminOrb installed on that phone (which also not works) that uses the same proxy-orbiter.
but its not running (iirc)
could that be causing the problem?
The phone is out atm so i can't test

What else can i do?

78

Users / Re: New Version of the Dianemo iOS Orbiter

« on: May 06, 2012, 12:07:03 pm »

Hi,
i recently installed the Dianemo iOS Orbiter on my old 1st gen iPhone (iOS software version 3.1.3)
It installs just fine, but after i enter the connection details and hit the icon i get a black screen and it kills the app.
I know i got the right settings because these work on my other iPhone and iPad without a problem (different device numbers).
In iTunes it states iOS 3.0 or higher.
I disabled the advanced UI.

Anybody any suggestions how to get it working?

br,
Raymond

79

Users / Re: Merten Z-Wave alarm-sensors

« on: April 17, 2012, 09:49:56 am »

Hi Sambuca,

Thanks for you reply.
The thing i don't understand is, how is it possible that Lmce sees your merten device as 1 device, as it has 2 buttons?
How can Lmce see which of those 2 buttons is pressed? or am i missing something ?

br,
Raymond

80

Users / Merten Z-Wave alarm-sensors

« on: April 16, 2012, 11:49:39 pm »

Hi guys,

I was wondering if anybody tried and used:
http://wiki.linuxmce.org/index.php/Merten_506004_Connect_Radio_Transmitter_FM_4gang
with:
http://www.myalarmstore.com/product_info.php?cPath=22_32&products_id=201
to produce, for example, 4 door-sensors to use in the security section of Lmce?

Can the Merten 506004 be used as security-sensors in Lmce?

br,
Raymond

81

Marketplace / Re: Dianemo Systems from CHT - Now Shipping World Wide on Ubuntu 11.10!

« on: March 14, 2012, 08:50:11 am »

Why i brought it up is because i see good use of it to do a centralized install and keep the equipment to a minimum.
One could build a NC/Core with multiple video cards and use hdmi-extenders to serve multiple EA.
(You can get boards with up to 4 or 5 PCIe 2.0 x16 slots iirc.)
In a way like you can add multiple audio-cards and use those for multiple EA.

I was under the assumption you guys did more centralized installs then de-centralized, thats why i asked you.
I am thinking to turn my install into centralized, part because of the noise of MD's
Sadly i don't have the skills to do it myself , otherwise i would.

br,
Raymond

82

Marketplace / Re: Dianemo Systems from CHT - Now Shipping World Wide on Ubuntu 11.10!

« on: March 14, 2012, 12:26:33 am »

Hi Andrew,

Can Dianemo S be used to control 2 nVidia graphic-cards in 1 NerveCenter, to control 2 audio/video zones with HDMI-extenders.

In other words, use, for example, this motherboard with 2 x PCIe 2.0 x16 slots, with 2 nVidia GT520 cards:
http://www.asus.nl/Motherboards/AMD_AM3/M4A87TD_EVO/#specifications
And configure 1 card for EA-1 and the other for EA-2

br,
Raymond

83

Users / Re: New LMCE splash screen/logo!

« on: February 21, 2012, 09:10:52 pm »

Hi all,

Taking my design-ideas and what i learned, from making some of the graphics for RoamingOrb, applying them to the splash-screen, this is what i think should make a  beautiful splash-screen



Any feedback is much appreciated.
br,
Raymond

84

Users / Re: New Roaming Orb iOs app

« on: February 15, 2012, 10:28:09 pm »

Thanks DragonK,

I very much appreciatie your kind words.
For the splash-screen i have a few things in my head, i just have to find the time to do them

Br,
Raymond

EDIT: made this http://forum.linuxmce.org/index.php/topic,12353.msg87745.html#msg87745

85

Users / Re: Android QOrbiter

« on: February 12, 2012, 09:13:42 am »

Hi golgoj4,

A very big Congratulations on your beta release of qOrbiter.
Great work.

br,
Raymond

86

Installation issues / Re: Using SoftSqueeze

« on: February 06, 2012, 11:03:21 pm »

part of the DCERouter.log

Code: [Select]

05 02/06/12 22:59:32.825 file grid pics took 0 ms <0x919e3b90>
08 02/06/12 22:59:32.826 Received Message from 38 (Web Orbiter iPhone Ingrid / Woonkamer) to 4 (General Info Plug-in / Slaapkamer (Master)), type 1 id 71 Command:Request File, retry none, parameters: <0x667fdb90>
08 02/06/12 22:59:32.826   Parameter 13(Filename): /home/mediapics/182_tn.jpg <0x667fdb90>
08 02/06/12 22:59:32.826 Received Message from 38 (Web Orbiter iPhone Ingrid / Woonkamer) to 4 (General Info Plug-in / Slaapkamer (Master)), type 1 id 71 Command:Request File, retry none, parameters: <0x667fdb90>
08 02/06/12 22:59:32.826   Parameter 13(Filename): /home/mediapics/182_tn.jpg <0x667fdb90>
08 02/06/12 22:59:32.827 Received Message from 38 (Web Orbiter iPhone Ingrid / Woonkamer) to 4 (General Info Plug-in / Slaapkamer (Master)), type 1 id 71 Command:Request File, retry none, parameters: <0x667fdb90>
08 02/06/12 22:59:32.827   Parameter 13(Filename): /home/mediapics/182_tn.jpg <0x667fdb90>
08 02/06/12 22:59:32.828 Received Message from 38 (Web Orbiter iPhone Ingrid / Woonkamer) to 4 (General Info Plug-in / Slaapkamer (Master)), type 1 id 71 Command:Request File, retry none, parameters: <0x667fdb90>
08 02/06/12 22:59:32.828   Parameter 13(Filename): /home/mediapics/182_tn.jpg <0x667fdb90>
07 02/06/12 23:00:08.160 Event #65 has no handlers <0x635feb90>
07 02/06/12 23:00:08.160 Received Message from 1 (CORE / Slaapkamer (Master)) to -1001 (unknown / ), type 2 id 65 Event:Device Detected, retry none, parameters: <0x635feb90>
07 02/06/12 23:00:08.160   Parameter 5(Mac Address):  <0x635feb90>
07 02/06/12 23:00:08.160   Parameter 13(Text): WDC_WD20EARS-00J [sdb1] on dcerouter <0x635feb90>
07 02/06/12 23:00:08.160   Parameter 28(IP Address):  <0x635feb90>
07 02/06/12 23:00:08.161   Parameter 49(PK_DeviceTemplate): 1790 <0x635feb90>
07 02/06/12 23:00:08.161   Parameter 51(VendorModelID):  <0x635feb90>
07 02/06/12 23:00:08.161   Parameter 52(PK_CommMethod): 8 <0x635feb90>
07 02/06/12 23:00:08.161   Parameter 53(PK_PnpProtocol):  <0x635feb90>
07 02/06/12 23:00:08.161   Parameter 54(PNP Serial Number): d0dccede-154c-473d-a586-b74cd5d3366b <0x635feb90>
07 02/06/12 23:00:08.161   Parameter 55(DeviceData): 267|d0dccede-154c-473d-a586-b74cd5d3366b|277|1.8T <0x635feb90>
07 02/06/12 23:00:08.161   Parameter 56(Category):  <0x635feb90>
07 02/06/12 23:00:08.161   Parameter 59(Signature):  <0x635feb90>
08 02/06/12 23:00:08.168 Received Message from 1 (CORE / Slaapkamer (Master)) to OnScreen Orbiter(21),Web Orbiter for qOrbiter(112), type 1 id  809 Command:Display Alert, retry none, parameters: <0xa03efb90>
08 02/06/12 23:00:08.169   Parameter 9(Text): 96344 Done with new device Added: WDC_WD20EARS-00J (sdb1) on dce <0xa03efb90>
08 02/06/12 23:00:08.169   Parameter 70(Tokens): pnp_96344 <0xa03efb90>
08 02/06/12 23:00:08.169   Parameter 182(Timeout): 2 <0xa03efb90>
08 02/06/12 23:00:08.169   Parameter 251(Interruption): 2 <0xa03efb90>
05 02/06/12 23:00:08.208 Socket::ReceiveData 0x8a96ef0 failed, bytes left 0 start: 56230000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 183 Incoming_Conn Socket 183 127.0.0.1 <0x635feb90>
05 02/06/12 23:00:08.209 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 183 127.0.0.1 <0x635feb90>
05 02/06/12 23:00:08.209 TCPIP: Closing connection to -1003 (Router Dev #0) 0x8a96ef0 m_Socket: -1 <0x635feb90>
05 02/06/12 23:00:08.209 Router::RemoveAndDeleteSocket 0x8a96ef0 -1003 <0x635feb90>
08 02/06/12 23:00:13.098 Received Message from 38 (Web Orbiter iPhone Ingrid / Woonkamer) to 10 (Media Plug-in / Slaapkamer (Master)), type 1 id 43 Command:MH Play Media, retry none, parameters: <0x667fdb90>
08 02/06/12 23:00:13.098   Parameter 2(PK_Device):  <0x667fdb90>
08 02/06/12 23:00:13.098   Parameter 3(PK_DesignObj):  <0x667fdb90>
08 02/06/12 23:00:13.098   Parameter 13(Filename): !G38 <0x667fdb90>
08 02/06/12 23:00:13.098   Parameter 29(PK_MediaType):  <0x667fdb90>
08 02/06/12 23:00:13.098   Parameter 44(PK_DeviceTemplate):  <0x667fdb90>
08 02/06/12 23:00:13.098   Parameter 45(PK_EntertainArea): 3 <0x667fdb90>
08 02/06/12 23:00:13.098   Parameter 116(Resume):  <0x667fdb90>
08 02/06/12 23:00:13.098   Parameter 117(Repeat):  <0x667fdb90>
08 02/06/12 23:00:13.098   Parameter 253(Queue):  <0x667fdb90>
01 02/06/12 23:00:13.109 debug_stream_end MediaStream::MediaStream c1 1003/0xad6ac168 source 149 <0x8b9d7b90>
07 02/06/12 23:00:13.110 Event #21 has no handlers <0xa95f7b90>
07 02/06/12 23:00:13.110 Received Message from 10 (Media Plug-in / Slaapkamer (Master)) to -1001 (unknown / ), type 2 id 21 Event:Listening to Media, retry none, parameters: <0xa95f7b90>
07 02/06/12 23:00:13.110   Parameter 27(PK_Room): 13 <0xa95f7b90>
01 02/06/12 23:00:13.118 About to call CMD_Play_Media sole master to 148 play media within start streaming <0x8b9d7b90>
05 02/06/12 23:00:13.118 Is streaming ?: 1 <0x8b9d7b90>
05 02/06/12 23:00:13.118 play media command sent from 136 to 148! <0x8b9d7b90>
05 02/06/12 23:00:13.119 Media_Plugin::CheckForAlternatePipes no destination for EA 3 Serre <0x8b9d7b90>
08 02/06/12 23:00:13.119 Received Message from 136 (SlimServer Plug-In / ) to 148 (Slim Server Streamer Serre2 / Serre), type 1 id 249 Command:Start Streaming, retry none, parameters: <0x999f3b90>
08 02/06/12 23:00:13.120   Parameter 29(PK_MediaType): 0 <0x999f3b90>
08 02/06/12 23:00:13.120   Parameter 41(StreamID): 1003 <0x999f3b90>
08 02/06/12 23:00:13.120   Parameter 42(MediaPosition):  <0x999f3b90>
08 02/06/12 23:00:13.120   Parameter 59(MediaURL):  <0x999f3b90>
08 02/06/12 23:00:13.120   Parameter 105(StreamingTargets): 149, <0x999f3b90>
05 02/06/12 23:00:13.120 The target device 148 (routed to 148) has not registered. <0xb64c4b90>
08 02/06/12 23:00:13.120 Received Message from 136 (SlimServer Plug-In / ) to 148 (Slim Server Streamer Serre2 / Serre), type 1 id 37 Command:Play Media, retry none, parameters: <0x999f3b90>
08 02/06/12 23:00:13.120   Parameter 29(PK_MediaType): 4 <0x999f3b90>
08 02/06/12 23:00:13.120   Parameter 41(StreamID): 1003 <0x999f3b90>
08 02/06/12 23:00:13.120   Parameter 42(MediaPosition):  <0x999f3b90>
08 02/06/12 23:00:13.120   Parameter 59(MediaURL): /home/public/data/audio/WDC_WD20EARS-00J (sdb1) on dce [32]/Kings of Leon/Come Around Sundown/The End.wav <0x999f3b90>
05 02/06/12 23:00:13.120 The target device 148 (routed to 148) has not registered. <0xb64c4b90>
08 02/06/12 23:00:13.120 Received Message from 10 (Media Plug-in / Slaapkamer (Master)) to 149 (SqueezeBox Player / Serre), type 1 id 192 Command:On, retry none, parameters: <0xa95f7b90>
08 02/06/12 23:00:13.128   Parameter 97(PK_Pipe): 1 <0xa95f7b90>
08 02/06/12 23:00:13.128   Parameter 98(PK_Device_Pipes):  <0xa95f7b90>
05 02/06/12 23:00:13.128 The target device 149 (routed to 148) has not registered. <0xb64c4b90>
08 02/06/12 23:00:13.129 Received Message from 10 (Media Plug-in / Slaapkamer (Master)) to 38 (Web Orbiter iPhone Ingrid / Woonkamer), type 1 id 242 Command:Set Now Playing, retry none, parameters: <0xa95f7b90>
08 02/06/12 23:00:13.129   Parameter 3(PK_DesignObj): 54,4962,47,244,224,230 <0xa95f7b90>
08 02/06/12 23:00:13.129   Parameter 5(Value To Assign): Kings of Leon
Come Around Sundown <0xa95f7b90>
08 02/06/12 23:00:13.129   Parameter 9(Text): The End <0xa95f7b90>
08 02/06/12 23:00:13.129   Parameter 29(PK_MediaType): 4 <0xa95f7b90>
08 02/06/12 23:00:13.129   Parameter 41(StreamID): 1003 <0xa95f7b90>
08 02/06/12 23:00:13.129   Parameter 48(Value): 0 <0xa95f7b90>
08 02/06/12 23:00:13.129   Parameter 50(Name):  <0xa95f7b90>
08 02/06/12 23:00:13.129   Parameter 103(List PK Device): 148,148,148,,0,0,0 <0xa95f7b90>
08 02/06/12 23:00:13.129   Parameter 120(Retransmit): 1 <0xa95f7b90>
05 02/06/12 23:00:13.156 Media_Plugin::StartMedia() function call completed with honors! <0x8b9d7b90>

thanks in advance

87

Installation issues / Using SoftSqueeze

« on: February 06, 2012, 12:14:32 am »

Hi all,

I am trying to get SoftSqueeze to work with Lmce.
http://wiki.linuxmce.org/index.php/SlimDevices_/_Logitech_Squeezebox

The situation so far:
On the Core, i added DT#53 (Slim Server Streamer) and as its child i added DT#58 (Squeezebox Player)
Both have the same Rooms and Entertain areas.
In the Entertain area there is no other media than the SoftSqueeze.
In DT#58 i added a MAC address 00:00:00:00:00:01 (fake, just for use in here)

On my MacBook i installed Softsqueeze (http://softsqueeze.sourceforge.net/)
In there i filled in:
Squeezebox Server Hostname: 192.168.80.1
Squeezebox Server HTTP Port: 9000
Squeezebox Server SlimProto Port: 3483
SoftSqueeze MAC Address: 00:00:00:00:00:01

I also did a apt-get install logitechmediaserver and got the latest.
In there i had to fill in the media-folder so all my audio-files would show up.

The Logitech Media Server and the Softsqueeze do see each other and with both i can start music on the SoftSqueeze player.

On my orbiter, in the room i added the SoftSqueeze to, there are media scenario's added.
When i select the audio scenario and play a song nothing happens.

Any help would be much appreciated,
thanks upfront,

br,
Raymond 

88

Marketplace / Re: Dianemo 10.10 Systems from CHT - Now Shipping World Wide!

« on: January 19, 2012, 09:39:01 am »

Hi Andrew,

If my memory serves me right, you guys where developing/looking into a new hardware Media Director/Manager.
You asked if there where people who would be interested to buy it in a batch (with lots of people at once)

Are there any updates or progress in this project?

I recently got a new TV and i am in for a new MD

br,
Raymond

89

Marketplace / Re: Dianemo 10.10 Systems from CHT - Now Shipping World Wide!

« on: January 18, 2012, 07:43:03 pm »

Thats quick
no problem Andrew, i am happy to help where i can.
br,
Raymond

90

Marketplace / Re: Dianemo 10.10 Systems from CHT - Now Shipping World Wide!

« on: January 18, 2012, 07:20:01 pm »

Hi Andrew,

Nice features added to the Dianemo iOs-app, great work.
Is there a save-button that i am missing?
Because when i rearrange the tab-bar buttons, then close and open the app, the tab-bar shows again its default configuration?

br,
Raymond