Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - RayBe

Pages: 1 [2] 3
Installation issues / Ticket #971 upnp server
« on: March 09, 2011, 01:22:03 pm »
After doing the update i still get:
"cannot connect to" when going in webadmin to advanced->configuration->UPnP-server.
Also i can't seem to find a UPnP-server on my home network.
Am i overlooking something?


Users / Aspect Ratio
« on: February 16, 2011, 04:33:12 pm »
Hi all,
is there a way to set the aspect ratio per default to 1:1 for 1 md?
So every time i want to wach something from that MD it uses the aspect ration 1:1

Installation issues / mythtv broken?
« on: February 11, 2011, 01:15:30 pm »
I can't seem to switch channels on my md, i get an error: "irrecoverable recorder error"
i am using a wintv pvr 150.
is there a fix to this?



asus k8v se deluxe with onboard SoundMax ADI ad1980, i use the spdif-coax bracket that i got with the mobo.
Installed on this mobo a extra soundblaster live!

The Soundblaster live! i wanna use in the future as a squeezeslave.
The onboard spdif-coax (through bracket) i hooked up to my reciever (Onkyo TX-SR600E)
I used that connection on my reciever with my dvd-player so i know its good.

in webadmin under MD it says sound card: soundblaster live! and when i change it its set-back to this!
and the strange thing is under advanced, section sound card it says "no sound cards found"

How do i get my md to default to spdif-coax-onboard-soundcard?

thanks for any help in advanced,

Installation issues / md kernel panic
« on: February 02, 2011, 01:13:40 pm »
trying to get my md working (asus K8V se deluxe, 1 gig, amd 3200+, connected to 32" crt via component)

what i did:
sudo apt-get update
sudo apt-get upgrade
added my resolution (576i) according to:
changed /usr/pluto/bin/ to: and
executed /usr/pluto/bin/

and then let the md pxe-boot without interfering and in the end i get:

[ 94.348339] kernel panic - not syncing: Attempted to kill init!

also it still seems to install nvidia 173 driver, don't know how or why.

don't know how to proceed,
could anybody help me out on this one?


Installation issues / [SOLVED!] Mythtv changing input connections
« on: January 31, 2011, 02:45:33 pm »
Hi all,

whenever i give my core a reboot i must adjust menu #4 (Input connections) of the MythTv setup,
somehow after the reboot LMCE changes the videoX number of my WinTV-PVR-150 card and the videoX number of my USB webcam wich i configured via motionwrapper.
is there a way to prevent this behaviour?

besides, after updating, i can't seem to switch channels anymore, what could be the cause of this?


Developers / Starting a new Skin
« on: January 31, 2011, 02:35:48 pm »
Hi All,

I want to start making/editing skins, for starters (and for learning) i want to keep it simple and just make new graphics files for a existing skin like discribed in this wiki:
But i don't want to mess up any existing skins so i want to copy a skin and start from there.
For example:
take /usr/pluto/orbiter/skins/Basic directory and copy and rename it to /usr/pluto/orbiter/skins/BasicNew wich i can alter.

could someone please explain in detail how to make such a copy of a existing skin (i don't want to mess-up the system)
and how to get acces (read/write) to this directory from a laptop inside the internal lan.



Installation issues / upnp server: 500 Internal Server Error
« on: January 31, 2011, 02:21:09 pm »
Hi all,

i wanted to test the UPnP server of LMCE but could find it on my network so i looked at:
webadmin -> Advanced -> Configuration -> UPnP Server
all it did show was a big message: 500 Internal Server Error

does anybody have any idea as how to solve this?

thanks upfront,


Users / Snapshot
« on: December 05, 2010, 02:08:51 pm »
Hi all,

maybe a bit of a stupid question but here it comes anyway :) :

in the wiki ( i saw that there is a new Update,
but when i look here at i saw that the snapshot is only 2.2G big.
when i do sudo apt-get update and sudo apt-get upgrade will i be getting all of the updates from Update 2010-12-05 23479?
and will everything be installed the way it is supposed to be or will there be issues?


Developers / Device templates
« on: November 22, 2010, 03:24:10 pm »
Hi all,

I am in the middle of making a GSD-device for my Ocelot and a few device templates for my AV-gear (tv, receiver, cable box)
and have a few questions.

for my ocelot i use a usb to serial adapter must i still use the serial hack (
or is setting the comport to: /dev/ttyUSB0 sufficient?

in the plug & play section of the gsd-device how do i get the MAC-adress, where can i find it?

my approach for the GSD-ocelot-device:
i learn every ir-code i need in the ocelot, giving a device 50 memory locations.

i only use #384 Process Receive Command for Child field, in here i wrote a Ruby program that generates a serial-command that the Ocelot understands.
to generate this command i use:
- device_.childdevices_[cmd.devidto_].devdata_[12] to get the port-number, which i assign to the port-number of my Ocelot.
- cmd.id_ to get the command ( fired within LinuxMCE to calculate the stored ir-position (wich one from the 50 of 1 device) in the Ocelot.
- cmd.devidto_ to get the device to determine if i must be in location 52, 102, 152 etc (every 50 is a deferent device).

my assumption was that when i add AV-devices it automatically generates a 'remote' in UI1 on a orbiter, so if i would press Move Up on a orbiter (which is 200) my ruby-prog would pickup this signal and send the appropriate command to the Ocelot.

But there are no 'remotes' generated.

am i seeing things wrong? or did i forget to configure something?
in the AV-device section what comport must i use?


Developers / Trac LinuxMCE
« on: November 22, 2010, 10:35:20 am »
Hi guys,

does anybody know whats up with: ?
the site seems to be down.


Installation issues / connecting a CRT-TV via Component-video
« on: November 20, 2010, 01:39:22 pm »
hi all,

Somewhere in the forums i did read that Hari successfully uses a crt-tv connected via component-video.
Myself, i have a beautiful Loewe Mimo 32" 16:9 (PAL 576i) crt-tv with component in.
My MD has a GT6600 nvidia-card.
I just don't seem to get the configuration exactly right.

The part i did figure out is that i need to make a custom screen-resolution ( but with what values?
Or is there a other (better) way to do this? only via webadmin maybe, but how?
i did manage to get a picture but the tv doesn't detect it as a 16:9 resolution.

Anybody got a idea? Hari :)?

thanks a lot,
best regards,

Installation issues / Installing driver
« on: October 14, 2010, 04:00:19 pm »
i found this:

i want to try this driver because i believe they are for my webcam.
since i am a newbie to linux (learning as i com along :)) can i try this tutorial without risk of damaging my core, or are there risks i should take in consideration?


Installation issues / Logitech Quickcam Express
« on: October 14, 2010, 01:19:12 pm »
hi all,

i have a old Logitech QuickCam Express, lsusb tells me:
Code: [Select]
Bus 002 Device 003: ID 046d:0840 Logitech, Inc. Quickcam Express
following these wiki's:
i have been trying to get my usb cam working;
at best i get a picture where i can, very, very vaguely see a image but with a lot of green/purple distortion (big blocks).

if i go to mythtv setup, in the 'capture card setup' section i see:
Code: [Select]
Video Device: /dev/video0
Probed info: Camera [STV06xx]

in the webadmin -> motion wrapper -> Device data -> Motion Parameters,
i set these values:
Code: [Select]
#image settings
frequency 0
rotate 0
width 352
height 258
framerate 15
auto_brightness on
brightness 25
contrast 25
saturation 25
hue 25

#http control
control_localhost off
control_html_output on
control_port 8888

despeckle EedDl
lightswitch 50
minimum_motion_frames 2

noise_tune on
threshold_tune on
smart_mask_speed 5
gap 5
post_capture 30
pre_capture 15

locate on
text_double off
webcam_quality 80
webcam_maxrate 5
text_changes on
text_right %m-%d-%Y\n%T

ffmpeg_cap_new on
ffmpeg_timelapse 60
ffmpeg_timelapse_mode daily
ffmpeg_video_codec mpeg4

#snapshot config
snapshot_interval 2
snapshot_filename %Y/%m/%d/%H/minute_%M_%S
jpeg_filename %Y/%m/%d/%H/minute_%M_%S
movie_filename %Y/%m/%d/recordings/%m_%d_%Y_%H_%M_%S
timelapse_filename %Y/%m/%d/timelapse/%m-%d-%Y-timelapse

been playing around in motion wrapper and edited resolution, framerates and the suggestions according to the wiki's,
but nothing seems to get me a good picture.

anybody any idea or suggestion?


Users / Copy/paste
« on: October 13, 2010, 01:06:12 pm »
Hi all,
this is a big rookie question, but i can't figure it out (i am a newbie to Linux, but learning as i come along :) )
i got a usb-hdd with some of my media on it.
now i want to copy that media onto my internal 2TB hdd.

if i put the usb plug in, the drive gets recognized by kubuntu but NOT by LinuxMCE is this normal?
(or should i wait longer, waited 5 min)

second, if i go to KDE desktop i can't manually copy and paste using dolphin,
i can select and copy (rightclick menu) but if i want to paste the files to my 2TB hdd, and rightclick, the option to paste can't be used!

anybody any suggestions?


Pages: 1 [2] 3