Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - dcubox1

Pages: [1] 2
1
Users / System with no connection to outside world!
« on: January 18, 2012, 04:05:55 pm »
So im looking to setup a system in a very remote location where it is impossible to get a connection to the outside world (3g maybe!)

anyhow what I want to know is will the system still operate without an "external" router?

Oh and will I be missing stuff like updates etc even if I take the final release of 810?

2
Installation issues / Snapshots reduced in size and also 1004 Q?
« on: December 06, 2010, 01:01:49 pm »
Hi all,

I was looking at the snapshots today and noticed that they are now building at around 2.2 gig instead of the usual 3.8 gig!!
Is there something up with the build?



On a seperate note, i see that 1004 has now begun....is 810 still not in beta? what are the advantages of moving to 1004?

3
Users / Shoutcast Plugin
« on: May 19, 2010, 07:11:28 pm »
Im trying to setup the shoutcast plugin and I followed the instructions in the wiki, however afer rebooting when i go into Audio and look under sources, no new Shoutcast option appears, im using 810 with UI2! any advice?

4
Users / No UI...?
« on: May 19, 2010, 10:28:32 am »
So I was trying to switch between the skins on my virtualbox setup with UI1 and after choosing the slate skin I now have a blank UI with No buttons etc!! and I cannot get back into Kde to change it back!!

Anyone know how to get into Kde or even change the UI skin through a database query via the command line?

5
Users / Wireless VGA transmitter
« on: May 14, 2010, 12:53:06 pm »
Just wondering if anyone has used anything like the below link:

http://www.iogear.com/product/GUW2015VKIT/

I have a situation where I cannot get a CAT5 cable near my tv but I was thinking of using something like this to send the MD content to the TV!!

Would appreciate any help as its bugging me not being able to get media to this TV!!

6
Users / Play audio on different MD
« on: May 06, 2010, 08:37:11 pm »
Ok so yet again have another strange one :)

I have a MD setup but it has only standard audio (2channel)
On my hybrid I have 5 channel surround sound via optical SPDIF.

The MD is just hooked up to my projector....what im trying to do is have the video stream from my MD but play the audio from my hybrid!!! this possible??? :P

7
Users / Best MD?
« on: May 05, 2010, 11:44:15 am »
So im looking at buying a new MD for PXE booting anyone got any opinions on a good spec but not over priced MD?
Looking for something with HDMI and/or SPDIF outputs preferably....

8
Users / Subtitles on Core but not MD
« on: May 04, 2010, 11:06:00 pm »
Ok have a strange one,

I have a few video files that have subtitles, embedded not seperate files....
When I play the video on My Hybrid I get the Subs however playing the files on any other MD gives me just the movie with no Subs!!
Any ideas why??

9
Users / [SOLVED] XScale orbiter .cab file missing?
« on: May 04, 2010, 09:14:03 pm »
Anyone know where the .cab files are gone to install onto a Pocket PC device?
I tried to download them from the link on the admin login page but the file size is 0???

10
Users / How Long for initial PXE boot
« on: April 28, 2010, 07:18:02 pm »
Ok so im trying to PXE boot a windows machine....
I have followed the steps in the wiki where I take down the MAC address and add the MD in the
admin page.... However when I reboot using PXE the MD still only loads the same stuff "Unable to load..." hiw can i tell if the image is built???

Thanks

P.S. the last line on the PXE boot says:
Code: [Select]
Unable to locate configuration fileif that helps!

11
Users / single to doudle nic!!
« on: April 26, 2010, 08:17:31 pm »
OK so im going crazy trying to move from a single to double NIc on my hybrid.
I have read numerous posts and followed the "updated" wiki instructions.
However I have had no success so far and im getting tired of trying things!

Here is what my admin page says under Advanced>NEtwork Settings

Code: [Select]
EXTERNAL_IFACE  eth1
EXTERNAL_MAC 00:10:
EXTERNAL_IP
EXTERNAL_NETMASK
EXTERNAL_DHCP 1
INTERNAL_IFACE eth0
INTERNAL_MAC 00:24:21:04
INTERNAL_IP 192.168.80.1
INTERNAL_NETMASK 255.255.255.0
GATEWAY 0.0.0.0
DNS1 192.168.0.254
DNS2 192.168.0.254

From reading posts im guessing the nics are mixed up??
Also how do i set the second NIC to have a mac address as it looks wrong!!

Thanks all

12
Users / Moving from single to double NIC
« on: April 19, 2010, 04:34:02 pm »
Hi all

I am moving from a single to a double NIC and was wondering if the instructions on the wiki are still relevant?:

http://wiki.linuxmce.org/index.php/Single_to_Double_NIC

I looked through some posts and most of them are very old(2-3 years) that refer to this so just wondering
if its still the same with 810 beta?

13
Users / Just got Pvr 150- Need Help
« on: April 14, 2010, 07:51:03 pm »
Ok so I just got my Win-Pvr-150 card  :)
I put it in my hybrid, Booted up the hybrid and it detected it and installed everything it needed.
Where do I go from here to set it up?

Im using the RF out of my sky box into the Tuner port of the card (I will go s-video) at some stage....

I have been messing about with Mytv Tv setup trying to do capture card but im totally lost with this area as i have never installed a tuner card!!

Any help on how to get this going would be wonderful..

Thanks all..

14
Users / Install mySQL
« on: April 14, 2010, 03:03:53 pm »
What is the easiest way to install mySQl to allow me look at the database tables?

15
Users / 810 Abandoned?
« on: April 01, 2010, 11:04:31 am »
Do me eyes decieve me or did I just read that 810 is being scrapped and all is being rolled back???
Does this mean I will have to do a fresh install with 710??

Forgive me if I have mis-understood the article!!

Pages: [1] 2