Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dh

Pages: [1] 2 3 4
1
Users / Re: 1004: The time has come.
« on: May 16, 2012, 06:58:41 pm »
L3, have you had a chance to glance at either of the issues I sent info to you on (sound distortion with ALC1200 or the weird TV size detection issue)?  I'm happy to re-test the current snap?

2
I have selected the MC-66 from Home Theater Direct.

http://www.htd.com/Products/mid-level-whole-house-audio/MC-66-Multi-Zone-Controller

Quite cheap and allows matrix switching (any source to any zone).

3
Thanks for the effort, I wish I had coding skills to support your effort, but I do not. I just wanted to offer another idea to get this done; would it be possible to use USB "soundcards" for each zone, and then use individual amps (might be more flexible and lower cost)?

http://www.buy.com/pr/product.aspx?sku=216778522&sellerid=29345858

http://www.amphony.com/cart/index.php?main_page=product_info&cPath=2&products_id=2

That way the distributed audio could be centralized (at the core location with speaker wires to each zone), or they could be separated to each Media Director in each zone (I would imagine synchronizing the audio would then be the hurdle). If the idea has merit, I'd like to help somehow; I can donate the hardware if it helped the cause...

It's definitely a good idea to support the use of multiple sound cards as 'sources'.  I think that sort of approach could be rolled into the concept.  As I figure out more about how this will be working I'll try to include that. 

Thanks for the idea!

4
I'm taking the plunge.  Time to start building some interfaces... I'm attempting to develop a LinuxMCE 'proper' control system for a whole house audio system.

The ideal result would be the ability to select media from the core (or any media device) and route it through the central distribution system to any/all of the rooms.  Ideally this would be 'proper' in that you wouldn't get two devices fighting for the same output... and ideally you wouldn't have to have hard 'locks' on the devices such that you'd have to go to the other room to 'release' a zone before someone else could use it.

The central distribution system consists of:

Marantz SR6006 AV receiver (Main zone 7.1 speakers, two auxillary zones, each with volume control)

3 matrix 6x6 switches with RS232 control -> 3x12 channel amplifiers -> 2-4 speakers per room.

All 6 inputs on each will be mapped the same and at present include:

Input 1:  Marantz Zone 2
Input 2:  Marantz Zone 3
Input 3:  Airplay from the Core (hopefully)
Input 4:  Hard line input from MP3 players (ipod, etc) via 3.5mm stereo jack
Input 5:  Media Director #1 (master bedroom)
Input 6:  ?

Each of the 6 outputs will be hard-wired to a pair of amplifier channels dedicated to each room.

So, the questions:

1.  How best to design this for LMCE compatibility?
2.  Can I embed multiple RS232 controllers and the code to run each one into a single LMCE DCE device with 18 sub-zones?  Or do I need to frankenstein something up to make each 6x6 switch a separate 'zone controller' with 6 sub-zones?
3.  Anyone willing to tutor a bit if I get stuck working on it (I will)?

Thanks in advance,
Dh

5
Installation issues / Re: Blargh. About to give up.
« on: May 02, 2012, 11:01:31 pm »
I use this motherboard as a core:

Core - Basement

NZXT Gamma Black Case - 580 Watt Green 80 power supply
Asus M3A78-EM Mother board
1x AMD X2 5000+ Dual core 2.6GHz
2G RAM - OCZ
1x LiteOn DVD-CDRW
1x Seagate 500GB SATA drive (OS Drive)
2x Western Digital 500GB SATA drive (media)
1x Hitachi 1TB SATA (media)
1x Seagate 2TB SATA (media)

I am currently using 10.04 and the ATI card onboard is what is hooked to the monitor in the server room.

Before that I was using a PCIe Nvidia Card I think the 8200 or sometthing. You do have to go into BIOS and set up the onboard devices to use the PCIe slot first.

Currently with the almost latest 10.04 install DVD LMCE-1004-20120412224425879.iso, the ATI card is functioning well, but this server sits in a closet in my office, if you intend to use it for your main viewing as well as serving PC, keep using your Nvidia card.

Good to know someone has this working, but I was hoping to use this as a hybrid.  Have you ever used the digital sound out on this motherboard?

6
Installation issues / Re: Blargh. About to give up.
« on: May 02, 2012, 10:55:39 pm »
That setup is great. I know you were in chat last night but I was in and out.

I am left wondering if you disabled the onboard nvidia chipset in bios?

Onboard video is disabled.

The only problem with the setup is the sound distortion I'm getting with digital output and some slow-down/choppy video with high bitrate encoding.  This was _not_ a problem with 0810 or without digital audio, so I am guessing there is a alsa/pulseaudio issue, but I can't figure it out.

Here's the link to the diagnostics I've acquired so far in 12.04:  https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/195585.

I've previously sent you a bunch of diagnostics from the 10.04 build, but the distortion in sound is identical.  I just got in some optical links, so I'm going to try to bypass the HDMI tonight and see if I can get clean sound out that way.  However, I think it's a driver issue, as I'm getting the distortion even on the headphone out via front panel.

7
Installation issues / Re: Blargh. About to give up.
« on: May 02, 2012, 07:08:01 pm »
If you tell me what your current hw is, we can start there and give you a cheap/nobrainer answer.

Current hardware:

CPU    AMD Athlon II X2 245 2.9GHz    
Mainboard    ASUS M3A78-EM    (on-board sound)
Video card    ASUS EN9400GT (HDMI)

http://wiki.linuxmce.org/index.php/User:Dh

8
Installation issues / Re: Blargh. About to give up.
« on: April 30, 2012, 07:28:36 pm »
Nobody?   Does anyone have a newish hybrid core?  If so, what are your specs?

D

9
Installation issues / Re: kstartupconfig4 xmessage
« on: April 27, 2012, 03:18:39 pm »
L3 fixed this for me in IRC last night.  Short version is that you need to chown the .kde directory to your current user.

something like:  chown -R <username>.<username> /home/<username>/.kde

L3 can correct if I'm off?

PS:  L3 mentions we should 'stop using the desktop' =)

10
Installation issues / Blargh. About to give up.
« on: April 27, 2012, 06:37:47 am »
I think I'm done playing with my current hardware setup.  It's just too painful to get working.  Could anyone point me to a semi-modern, 1080p capable hybrid configuration that I won't have to futz with?

Mainboard
Vid Card
Sound card (if needed)

Thanks.

11
Users / Re: 1004: The time has come.
« on: April 17, 2012, 06:22:18 am »
Snap:  916

Getting stuck at "boot:" a few times through the process... unsure if it's me doing/not doing something?

Dh

12
Developers / Re: Marantz SR over RS232
« on: April 16, 2012, 01:24:45 am »
it works fine when you remove the part from the GSD that emits events.

I don't understand that response.  I guess I'll look into it and see if I can get it working.

D

13
Developers / Re: Marantz SR over RS232
« on: April 13, 2012, 02:23:39 am »
Did anyone get this Marantz interface working?  I'm considering purchasing a Marantz receiver and was hoping that it was now supported...

14
Installation issues / No sound, no vid after 0810 installation
« on: November 12, 2011, 11:55:16 pm »
Displays the orbiter and AV wiz, but Sarah's window is black and there is no sound.

Vid card:  EN9400GT
MOBO:  M3A78-EM
Vid card HDMI connection to TV

Any suggestions or diagnostic assistance would be appreciated.

D

15
Installation issues / Re: Installation hang on second step. Please help))
« on: November 04, 2011, 08:34:48 pm »
We are investigating the issue and will post a fix as soon as it is available.

Any updates?

D

Pages: [1] 2 3 4