Messages

31

Installation issues / Re: Squeezeslave Problems

« on: December 05, 2010, 07:40:18 am »

Ok, been busy with school but I finally figured out that I had two instances of squeezeslave running at once with the same mac address defined :/ I guess I won't work at night on anything headless again...

32

Installation issues / Re: Squeezeslave Problems

« on: November 26, 2010, 03:22:42 am »

Which log exactly on the router? :/ Sorry and I have the windows version of Squeezeslave running in a command prompt just printing the debug information into the console and nothing happens when I try to play something with the orbiter

33

Installation issues / Squeezeslave Problems

« on: November 25, 2010, 09:57:49 pm »

I have four sound cards powered by squeezeslave working fine with Squeezebox Server on the core, and I have them defined in the web admin as Squeezeboxes with rooms defined for each one. I can stream music to them perfectly through the web interface, at http://192.168.80.1:9000/, but when I try to control them with an Orbiter it will allow me to select audio and then never starts: the time elapsed for the song doesn't even come up on the orbiter.

Anyone been in the situation?

34

Installation issues / Re: Only eth0 works

« on: September 04, 2010, 04:56:15 am »

I eventually just enabled one of my on board NICS in BIOS and added a PCI card :/

35

Users / Confused about GE Interlogix

« on: August 24, 2010, 07:33:37 pm »

Let me start off by saying I've been slowly (and painfully) teaching myself Objective-C this summer to the point I can understand C++ and while I don't feel comfortable coding anything from scratch I could certainly try to make sense of any antiquated code in Pluto/LinuxMCE like support for Caddx NX-8E seems to be.

So basically I've got whole house audio working with TV and now I've finally gotten my GC-100 working (one of the new ones) to find that the instructions from the wiki entry "Caddx NX-8E" don't produce any response when a sensor is tripped :/ 

It is my understanding that this alarm panel used to be supported and is no longer but if ANYONE knows anything about it PLEASE RESPOND!! School is starting up and I'm getting a little crazy..
Thanks to ANYONE who has a system working with GE Interlogix, Caddx NX-8E, or anything else one would find to be relevant who responds!
Tred.

36

Installation issues / Orbiter Crashes Playing MP3 file

« on: August 20, 2010, 09:59:59 pm »

I've tried multiple Orbiters and multiple mp3 files but no matter what I try as soon as I click on the Artist under the Audio menu the orbiter crashes and reconnects to the router 
I'm completely baffled so if anyone has any ideas please share!
Thanks

37

Installation issues / Re: 810 Core, MD and Orbiters

« on: August 14, 2010, 06:27:04 pm »

It's my understanding that local booting on md's isn't supported anymore if that's any help

38

Installation issues / Only eth0 works

« on: August 14, 2010, 06:20:41 pm »

When I was installing LinuxMCE and was booted into Kubuntu (before I ran the install script) I could connect with both eth0 and eth1 (they're identical and both on the motherboard)
Now that I have linuxMCE installed I can get the core to either connect to the internet with eth0 but then it doesn;t give out IP addresses or if I switch the interfaces in web admin it will give out IPs and not connect to the external network. I've tryed reinstalling and have the same problem if anyone can help it would be greatly appreciated

39

Installation issues / Re: Why kubuntu install Nvidia drivers, if the video card is ATI?

« on: August 14, 2010, 05:50:17 pm »

Most ATI cards aren't supported with linuxMCE or linux in general- ATI just hasn't developed the drivers like nVidia has. Try getting an nVidia card and putting it in.

40

Installation issues / Re: Fresh install boots into tty1?

« on: August 12, 2010, 12:42:48 am »

Unfortunately I had chosen linuxmce install and can confirm it got an ip address on eth0... Anyone else have any ideas?

41

Installation issues / Fresh install boots into tty1?

« on: August 09, 2010, 11:16:47 pm »

I've decided to upgrade more core as my old one had a fairly slow processor and only two PCI slots I've put together a system with an MSI 790FX-GD70 mainboard and a GeForce 8400 GS 512MB GPU (https://secure.newegg.com/WishList/MySavedWishDetail.aspx?ID=11077474); It also has one of the new AMD Phenom II 6 core CPU's. Unfortunately when I try to install 0810 from the latest snapshot it boots and the part where I would normally go through the generic Kubuntu install (NOT the part where the AV wizard is supposed to come up) is just a black screen however strangely enough it is receiving signal (the monitor isn't going to sleep)) So I tried to install just kubuntu 8.10 and was able to go through the internet installation just fine until I rebooted and saw instead of it going into the AV wizard it hangs and drops me into a console (tty1)

At this point I'm totally stumped and would appreciate any help I can get.

42

Installation issues / Re: Hulu Desktop missing flash

« on: June 23, 2010, 09:29:32 pm »

Hmm I had this problem and did :

Code: [Select]

wget http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_10_linux.deb
dpkg -i install_flash_player_10_linux.deb
rm install_flash_player_10_linux.deband Hulu works now

43

Installation issues / Re: IVTV on 0810

« on: June 23, 2010, 06:52:45 pm »

OK the problem is definitely IVTV not installing. I reinstalled the whole system (because of a bad hard drive) using the latest snapshot and it's still saying getting IVTV failed. Is there a problem with the repositories?

44

Installation issues / Re: IVTV on 0810

« on: June 22, 2010, 03:33:02 pm »

Ok I went into web admin and then into Myth Setup and deleted both tuners. Then I restarted the core and it hangs trying to install IVTV; eventually it moves on, but whenever I restart the core or reload the router it tries to install IVTV again.

As always thanks for any help!

45

Installation issues / Re: IVTV on 0810

« on: June 22, 2010, 01:58:19 am »

Nobody?