Hey Han
How do we get it added so it's always there in the future 1004 snapshots is that a request we need to do on the IRC

Regards
Beeker

Does anybody know if the NIC in this Foxconn unit will be supported in 1004

Will do thanks Andrew

Regards
Beeker

Question for the experts
I have an existing Core/Hybrid with a software RAID and I am taking Thom C's advice and others of using a server board and building a new Core/Hybrid then moving to an external NAS rather than a software RAID. Question is after I build the new Core and set the IP address to the addresses I was using on the old core, then just change the IP address of the old core to be able to move the content from the software RAID to the external NAS before converting the old core/hybrid to another external NAS

Thanks
Beeker 

Hey Crisis90
Glad to see you nearly have this Foxconn running mine is still sitting on the floor until 1004 goes beta, limited success with this as a MD, after all the stuffing around to get the NIC to be recognised mine would playback everything but it would freeze the image or sound whilst playing back intermittently.

Currently I have an old snapshot saved as an image and I use that, I have given up trying to get new snapshots as it's frustrating to spend all that time only to find out something else has been screwed, I personally love the ability and flexibility of LMCE I just get frustrated of doing updates or new installs only to find out more things are broken. I have just spent 3 days trying to get an Axis IP camera working following the wiki's and discussing on the IRC and now it is sitting on the floor as well....as per everybodys reconmendations now swapping over to Panasonic Cameras.

I hope you can get the Foxconn box working as it is perfect for going on the back of my plasma's, I just had so much trouble getting the NIC to be recognised even after following the wikis and IRC help it was just a complete pain, I hope this NIC will be included in 1004

Cheers
Beeker

Thanks...............much appreciated will try tonight when I get home from work and let you know

Cheers
Beeker

don't slap me but would that be http://lmcecompatible.com/

I have a list of older Panasonic Plasma RS232 codes and they work from my laptop so I know they work and yes I normally make up my own RS232 custom cables, it just getting the same codes working out lmce that is giving me issues

Cheers
Beeker

Would you be able to post a couple of screenshots of the template screens when you are back on your core so as I can make sure I am doing the same as you

Thanks again

BR
Beeker

Thanks happy to help out I will await the info and test and let you know how it goes 

Just wondering if anybody is controlling Dakin split Air cons via IR and if so does anybody have the IR codes or a template

Regards
Beeker 

Thanks that would be fantastic much appreciated, I have been up for three days now trying to get it to work

Currently I have a Linksys PAP2 with a POT's standard phone connected to it with a VOIP account and it is connected to Linuxmce and I can only make outside calls from the phone connected to the PAP2, the SIP account is registered in webadmin but I cant make calls from MD's or even do intercom calls between MD's. I have checked the trunks and dialing rules and all seem to be correct ........anybody have some ideas of things I should start checking as I want to install a SOLO usb MIC to be able to use it. I don't have a direct in dial number a of yet as owe use the standard POT's for incoming calls

Added to this if I try to make intercom or outside calls I get a msg on the orbiter Failed to make call: ERROR Couldn't make call from Device 68 to xxxxxxxxxxxl

Thanks Posde found it will give it a go and let you know how it goes looks easy enough, will start crossing fingers and toes

Posde
checked under Pioneer with the filter and could not find that template