Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Beeker

Pages: 1 ... 16 17 [18]
Installation issues / Re: Where has windows orbiter gone?
« on: January 18, 2010, 12:59:17 am »
Thanks for the PM have emailed you the Web Orbiter software

Installation issues / Re: Where has windows orbiter gone?
« on: January 17, 2010, 05:47:53 pm »
I am running 810 b2 and mine does the same thing not sure why, I do have a copy from a previous install that I can email to you if want........just pm me


Installation issues / Re: VOIP....saga continues please help
« on: January 14, 2010, 11:15:02 am »
The saga continues, my VOIP provide Pennytel comes back with a date and time saying registered as per below
but when I go to the direct dial page and enter in a number it just sits there saying calling and never connects, I think I am missing a step somewhere

When dialing a local number, automatically prepend the area code
Also prepend a digit (1 for US/Canada, 0 for Europe)
Local Number Length
Phone Lines
Type    Data        Password   Username    Host                     Phone number   Status                                                Action
SIP    pennytel    xxxxxxx    xxxxxxxx    xxxxxxxxxxx    Registered Fri, 15 Jan 2010 14:12:51    Edit Settings Delete

To learn about how to add more than 1 phone line, or to add a voice over ip provider that's not on the list, click here.

Beeker :-\

Installation issues / Re: VOIP....please help
« on: January 13, 2010, 10:28:29 pm »
Hey Kezza, thanks for your help after another coffee I went back and deleted the info I had put in new config  file that I had made........then went and added the provider on the web admin page and it worked and now it's registered.

Installation issues / Re: VOIP....please help
« on: January 13, 2010, 10:21:17 pm »
thanks did that with the tabs and it now shows up correctly in web admin, but the other issue is that I go through and select the provider and it fills in the correct url then I enter my user name, password, phone number & host and then click on submit but nothing comes back. Just to test I selected one of the other providers and used my info then clicked submit and it comes back showing the entry with the appropriate edit/settings and delete, I know it wont work using another provider I just wanted to see what would happen so I know it works. I copied the broadvoice config file template, do you know if I how to edit that file maybe that is where I am going wrong

Installation issues / Re: VOIP....please help
« on: January 13, 2010, 10:03:29 pm »
thanks for replying what is the correct spacing from what I can see in the wiki it's as per below which I have tried when editing provider_list.txt"

yournewprovider yourprovidershomepage yournewprovider yourprovidersprotocol

Installation issues / SOLVED VOIP....please help
« on: January 13, 2010, 09:39:47 am »
Hi All,
I have signed up with a VOIP company called Pennytel for the time being just to test out the VOIP features in Linuxmce 810 but cant get it to register, I have followed the wiki on setting "How to properly add support for SIP providers" but it fails to add the VOIP provider after I input all my user info.......any ideas

Desperate wife wants to kill me spending to much time on the PC


Installation issues / Re: Wii Remote
« on: January 08, 2010, 05:01:25 am »
the correct procedure of adding it to 810 beta2 as I don't want to stuff anything up


Installation issues / Wii Remote
« on: January 02, 2010, 10:34:03 am »
Has anybody had any success in getting a wii remote to work with 810 beta 2.......have tried and no luck so far. Any tips would be greatly appreciated


Installation issues / Re: 710 Software Raid & Playing .M2TS Files
« on: December 31, 2009, 12:46:50 am »
Thanks Colin for the great advice much appreciated, I was always wondering if I should upgrade to 810 or not.

I am planing to upgrade to 9000 series in the next couple of weeks and I have been testing different deinterlacing modes which made a slight improvement. From your experience can I ask what is the best and simplest way to upgrade to 810, I have made a current backup using web admin should I use this once I do the upgrade?


Installation issues / DVD CSS
« on: December 29, 2009, 08:01:18 pm »
Has there been any further progress in getting encrypted DVD's to play back in 710, have installed the latest css and have tried lots of ideas from the forums/wiki, but still the majority of ripped DVD's that were done on a windows pc refuse to play on the mce pc...........BTW all of them play in windows pc's

Any help would be much appreciated


Installation issues / 710 Software Raid & Playing .M2TS Files
« on: December 29, 2009, 04:49:29 pm »
I have just built my Linuxmce PC using 710 and all works well, just have a couple of small niggling issues that others with more experience could help me over the line with as the wife is complaining about me staying up all night and googling forums.

I have set up a software raid in 710 which is working ok, the only issue I am having is saving photos and videos to userxx folders, when I drill down via the web admin i.e
> home
    > user_2
        > data
            [ videos ]
                > Raid Array [26]
I can see this structure, when I use a windows pc with content I have on it and browse to the linuxmce pc I get presented with the home and my user folder which I then click on and then the Raid Array folder and copy the content into that folder. Problem is that when I go back to the Linuxmce MD in the living room and check my folder there is nothing there, I made sure to do a resync as well.......any suggestions would be greatly appreciated.

Also the other issue is that when I copied HD quality .m2ts home videos into the public video folder then play either from the core/hybrid or on the other MD they are slightly choppy and have interlacing lines............currently running NVIDIA 7600GS cards in both PC's with 2GB ram......they play okay on XP pc and over the network to a TVIX 5130. I have tagged them as LinuxMCE Bluray files which made a slight improvment, plus I have updated the NVIDIA drivers to the latest ones from the NVIDIA web site as per one of the wiki instructions

Kind regards

Pages: 1 ... 16 17 [18]