196
Users / Re: What devices are you running Web orbiter 2.0 on?
« on: July 15, 2010, 08:48:21 am »
No problems I meant to post in the other one, sorry about that
Beeker
Beeker
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
198
Users / Re: What devices are you running Web orbiter 2.0 on?
« on: July 15, 2010, 05:44:39 am »
Hi Andrew
Attached is a print screen after my most recent update and a print screen of the /var/www/lmce-admin/ after the update as you can see from the update txt file there are errors at the end I just can't seem to resolve. I have modified the Pin priority to 500 as per other post of update issues, any help would be very much appreciated.....stuck in a rut
Cheers
Bruce
Attached is a print screen after my most recent update and a print screen of the /var/www/lmce-admin/ after the update as you can see from the update txt file there are errors at the end I just can't seem to resolve. I have modified the Pin priority to 500 as per other post of update issues, any help would be very much appreciated.....stuck in a rut
Cheers
Bruce
199
Users / Re: FIX: apt-get update / upgrade not upgrading
« on: July 15, 2010, 04:11:31 am »
Hi All,
Attached is a list of the errors I am having whilst trying to do an update, I have modified the Pin priority to 500 still getting errors at the end of apt-get upgrade and apt-get update any help would be very much appreciated.....stuck in a rut
Cheers
Beeker
Attached is a list of the errors I am having whilst trying to do an update, I have modified the Pin priority to 500 still getting errors at the end of apt-get upgrade and apt-get update any help would be very much appreciated.....stuck in a rut
Cheers
Beeker
200
Users / Re: What devices are you running Web orbiter 2.0 on?
« on: July 13, 2010, 03:06:18 pm »
Hi Andrew,
Not sure if this is relevant I installed iOrbiter last week so I am not sure if this is causing an issue with web orbiter 2.0
Regards
Bruce
Not sure if this is relevant I installed iOrbiter last week so I am not sure if this is causing an issue with web orbiter 2.0
Regards
Bruce
201
Users / Re: What devices are you running Web orbiter 2.0 on?
« on: July 13, 2010, 03:00:52 pm »
Hi Andrew,
I will delete both devices again and do a apt-get update and apt-get upgrade and try re creating the devices again, I did originally use the wiki instructions that you mentioned and I have checked the /var/www/lmce-admin and I am only seeing weborbiter.php and a lot of other files not what is listed as per below in the wiki.
So I assume that because all the files that are listed in the wiki are not in the /var/www/lmce-admin/ folder then web orbiter 2.0 has not been installed yet. This is really strange as when I did the update it was over 300mb so I will try again unless you think I should try something else
Thanks and regards
Bruce
/var/www/lmce-admin/
You will see the following Web Orbiter related files (there are many other unrelated files in this directory too);
weborbiter_command.php
weborbiter_image.php
weborbiter.php
Look in;
/var/www/lmce-admin/weborbiter
You should see the following files;
IT.php
jquery.min.js
jquery.timers.js
login.html
waiting.gif
weborbiter.css
weborbiter.html
weborbiter.js
weborbiter_select.html
I will delete both devices again and do a apt-get update and apt-get upgrade and try re creating the devices again, I did originally use the wiki instructions that you mentioned and I have checked the /var/www/lmce-admin and I am only seeing weborbiter.php and a lot of other files not what is listed as per below in the wiki.
So I assume that because all the files that are listed in the wiki are not in the /var/www/lmce-admin/ folder then web orbiter 2.0 has not been installed yet. This is really strange as when I did the update it was over 300mb so I will try again unless you think I should try something else
Thanks and regards
Bruce
/var/www/lmce-admin/
You will see the following Web Orbiter related files (there are many other unrelated files in this directory too);
weborbiter_command.php
weborbiter_image.php
weborbiter.php
Look in;
/var/www/lmce-admin/weborbiter
You should see the following files;
IT.php
jquery.min.js
jquery.timers.js
login.html
waiting.gif
weborbiter.css
weborbiter.html
weborbiter.js
weborbiter_select.html
202
Users / Re: What devices are you running Web orbiter 2.0 on?
« on: July 13, 2010, 02:14:01 pm »
Hi Andrew,
I have just done an update & upgrade to 810 and was previously using the web orbiter, do I need to delete that device and recreate it to be able to use web orbiter 2.0. Also how do I tell that I do have 2.0 as I followed the wiki instructions for the iphone and have done a full regen and reload and both web devices one being a laptop and the other a iphone 3GS still refresh every 5 sec's.
The orbiter on the iphone is a postage stamp on the screen even though I set the size as 320 x 480
Any help is much appreciated
Cheers
Bruce
I have just done an update & upgrade to 810 and was previously using the web orbiter, do I need to delete that device and recreate it to be able to use web orbiter 2.0. Also how do I tell that I do have 2.0 as I followed the wiki instructions for the iphone and have done a full regen and reload and both web devices one being a laptop and the other a iphone 3GS still refresh every 5 sec's.
The orbiter on the iphone is a postage stamp on the screen even though I set the size as 320 x 480
Any help is much appreciated
Cheers
Bruce
203
Users / Re: Foxconn NetBox-nT330i as MediaDirector
« on: June 27, 2010, 12:45:59 am »
Hi Johannes,
I haven't had time to try Andrew's suggestions and there are other suggestions in the forum to try as well but it requires a deeper understanding then my basic cmd line knowledge so I am waiting to see if someone has some added instructions. I hope to get this up and running when I get back in a weeks time over the school holidays as I have a brand new unit sitting in the cupboard collecting dust. Does anybody have any suggestions on using a iPhone as an orbiter?
Beeker
I haven't had time to try Andrew's suggestions and there are other suggestions in the forum to try as well but it requires a deeper understanding then my basic cmd line knowledge so I am waiting to see if someone has some added instructions. I hope to get this up and running when I get back in a weeks time over the school holidays as I have a brand new unit sitting in the cupboard collecting dust. Does anybody have any suggestions on using a iPhone as an orbiter?
Beeker
204
Installation issues / Re: Can't find eth0 in the diskless image using Foxconn Nettop - 0331i as a MD
« on: June 13, 2010, 03:04:00 am »
Andrew,
Does your OEM version have the Atheros LAN port as I need more simplified instructions so I can modify the core to allow me to do a PXE boot from the Foxconn Nettop - 0331i
Beeker
Does your OEM version have the Atheros LAN port as I need more simplified instructions so I can modify the core to allow me to do a PXE boot from the Foxconn Nettop - 0331i
Beeker
205
Installation issues / Re: Can't find eth0 in the diskless image using Foxconn Nettop - 0331i as a MD
« on: June 10, 2010, 06:41:21 pm »
Have been working away from home for a month so I have not had time to get back to testing The Villans suggestions which I plan to do over the next couple of weeks.
I have had it turned on and it's very quiet not sure about the heat issue though I will be able to guage that once I get it running and then see how hot it gets whilst under load.
I plan to mount it on the back of my plasma and I still may need some help in getting the PXE boot to work as I have limited expertise in cmd line linux.......so if anybody has any tips I would greatly appreciate it
I have had it turned on and it's very quiet not sure about the heat issue though I will be able to guage that once I get it running and then see how hot it gets whilst under load.
I plan to mount it on the back of my plasma and I still may need some help in getting the PXE boot to work as I have limited expertise in cmd line linux.......so if anybody has any tips I would greatly appreciate it
206
Users / Re: Foxconn NetBox-nT330i as MediaDirector
« on: May 02, 2010, 02:58:20 am »Hi,
has someone tested this NetBox for use as MediaDirector?
Foxconn NetBox-nT330i
Tecnical Data:
Intel Atom 330 Prozessor 2x 1,6 GHz
NVIDIA 9400GT onBoard
Wireless LAN IEEE 802.11 b/g
6x USB 2.0
1x Gigabit-LAN
1x HDMI
1x DVI
Cardreader SD / SDHC / MS / MS Pro / MMC
It looks very interesting for use as a MediaDirector...
Sorry about my poor english!
Thank you!
This looks to be a good Atom/ion machine...there are tons of these now of course. As Techstyle points out the only potential problem is the Atheros NIC...but there seem to be people in XBMC world that have got this box running under the current XBMC Live Disc so it looks like this problem ix fixable. However this is all guess work on my part as we have not tested the T330i so tread carefully on this unit ;-)
All the best
Andrew
Andrew,
I just brought one and funnily enough the nic is not recognised I have tried following the steps in the wiki's of unrecognised nic's but no luck any suggestions
207
Installation issues / Can't find eth0 in the diskless image using Foxconn Nettop - 0331i as a MD
« on: May 01, 2010, 04:40:32 am »
Has anybody been able to get this Foxconn Nettop - 0331i to do a PXE boot.
It fails as it can't find eth0 in the diskless image of the Atheros LAN card so it ends up with a kernal panic, I have searched the wiki's and found two entries of how to add the missing module into the diskless setup but really need some assistance please...not sure of the module name to add.......not too experienced in command line linux
It fails as it can't find eth0 in the diskless image of the Atheros LAN card so it ends up with a kernal panic, I have searched the wiki's and found two entries of how to add the missing module into the diskless setup but really need some assistance please...not sure of the module name to add.......not too experienced in command line linux
208
Installation issues / Re: Alarm Panel Intergration
« on: April 18, 2010, 02:20:18 pm »
I now have the install manual if this helps....I can email it if someone can help to give a few pointers to whether this panel is able to be integrated into mce
209
Installation issues / Re: Alarm Panel Intergration
« on: April 18, 2010, 09:35:40 am »
Thanks,
What about if it does not have a an RS232 port can I still connect it to the core as I have a cabling duct between the panel & core
Beeker
What about if it does not have a an RS232 port can I still connect it to the core as I have a cabling duct between the panel & core
Beeker
210
Installation issues / Alarm Panel Intergration
« on: April 18, 2010, 07:31:46 am »
Hi All,
Looking for advice on integrating our existing alarm panel using mce's built in security if possible.
We have 5 battery operated wireless pir's, 3 x hard wired pir's, external siren and strobe, internal piezo siren, wireless control panel, wired control panel and 3 x wireless remotes for alarm control. Can mce control this type of equip and would I need something like a GC-100 or would it be simpler to use RS232 which I think the panel has..........any ideas or suggestions would be greatly appreciated
The alarm system is a Honeywell Ademco Vista-48A
Cheers
Beeker
Looking for advice on integrating our existing alarm panel using mce's built in security if possible.
We have 5 battery operated wireless pir's, 3 x hard wired pir's, external siren and strobe, internal piezo siren, wireless control panel, wired control panel and 3 x wireless remotes for alarm control. Can mce control this type of equip and would I need something like a GC-100 or would it be simpler to use RS232 which I think the panel has..........any ideas or suggestions would be greatly appreciated
The alarm system is a Honeywell Ademco Vista-48A
Cheers
Beeker