Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Beeker

Pages: 1 [2] 3 4 ... 18
16
Users / Re: URGENT 810 Software RAID failed after power outage
« on: August 20, 2013, 01:18:43 pm »
Hi Crumble,
Sorry been traveling and I finally got all the data of the RAID array and I want to try and add in the sdd1 so what should we do

Cheers
Beeker 

17
Users / Re: QNAP NAS
« on: July 19, 2013, 10:38:57 am »
I will try it again

18
Users / Re: QNAP NAS
« on: July 19, 2013, 10:34:25 am »
It's a great unit and if you upgrade the FW to version 4.0 its awesome I have 8 x 3TB HDD 's in RAID 6 giving me 16TB's


19
Users / Re: QNAP NAS
« on: July 19, 2013, 10:26:47 am »
No but I will try that and let you know how it goes

20
Users / Re: QNAP NAS
« on: July 19, 2013, 10:22:51 am »
Spot on

21
Users / Re: QNAP NAS
« on: July 19, 2013, 09:36:43 am »
You know much more than me :)

LMCE should recognise it as an external NAS storage device so you can see all the videos etc on it and be able to play them back

Cheers
Beeker

22
Users / Re: URGENT 810 Software RAID failed after power outage
« on: July 16, 2013, 05:43:45 pm »
Thanks............its a circus of HDD lights flashing in my office copying all that data off

23
Users / Re: URGENT 810 Software RAID failed after power outage
« on: July 16, 2013, 05:23:48 pm »
Hey Crumble,
Do you know if it will repair itself eventually or will it stay in damaged mode?

Don't want to push my luck though I cant get any help in getting LMCE to regonise the QNAP NAS if you see my other recent post I have tried everything I know which isn't much :)

24
Users / Re: URGENT 810 Software RAID failed after power outage
« on: July 16, 2013, 05:06:41 pm »
you bet I do...........and there was going to be a special mention to you on my headstone if all that hard work didn't pay off :)

I just browsed to the RAID array and all the data is there so I will be madly copying all the data off tonight

25
Users / Re: URGENT 810 Software RAID failed after power outage
« on: July 16, 2013, 05:02:19 pm »
Thanks Crumble you are awesome and I really
appreciate your patience and help

Kind regards
Beeker

:)

26
Users / Re: URGENT 810 Software RAID failed after power outage
« on: July 16, 2013, 04:57:50 pm »
LMCE now reports the RAID status as damaged and when I check the status of each HDD

sdb is ok
sbc is ok
sdd is still saying removed
sde is ok
sdf is still saying removed

27
Users / Re: URGENT 810 Software RAID failed after power outage
« on: July 16, 2013, 04:51:03 pm »
got this

dcerouter_1024641:/home/bruce# mdadm --assemble --force /dev/md1 /dev/sd[bcde]1
mdadm: /dev/md1 has been started with 3 drives (out of 4).
dcerouter_1024641:/home/bruce#

28
Users / Re: URGENT 810 Software RAID failed after power outage
« on: July 16, 2013, 03:35:17 pm »
tried putting a 1 and testing sdb,c,d & e again and below is what I got

dcerouter_1024641:/home/bruce# fsck.ext3 -v /dev/sdb1
e2fsck 1.41.3 (12-Oct-2008)
fsck.ext3: Group descriptors look bad... trying backup blocks...
Superblock has an invalid ext3 journal (inode 8).
Clear<y>? no

fsck.ext3: Illegal inode number while checking ext3 journal for /dev/sdb1

dcerouter_1024641:/home/bruce# fsck.ext3 -v /dev/sdc1
e2fsck 1.41.3 (12-Oct-2008)
fsck.ext3: Superblock invalid, trying backup blocks...
fsck.ext3: Bad magic number in super-block while trying to open /dev/sdc1

The superblock could not be read or does not describe a correct ext2
filesystem.  If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>

dcerouter_1024641:/home/bruce# fsck.ext3 -v /dev/sdd1
e2fsck 1.41.3 (12-Oct-2008)
fsck.ext3: No such file or directory while trying to open /dev/sdd1

The superblock could not be read or does not describe a correct ext2
filesystem.  If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>

dcerouter_1024641:/home/bruce# fsck.ext3 -v /dev/sde1
e2fsck 1.41.3 (12-Oct-2008)
/dev/sde1 has unsupported feature(s): FEATURE_I26 FEATURE_R26
e2fsck: Get a newer version of e2fsck!
dcerouter_1024641:/home/bruce#

29
Users / Re: URGENT 810 Software RAID failed after power outage
« on: July 16, 2013, 02:16:01 pm »
here you go

dcerouter_1024641:/home/bruce# mdadm --assemble --force /dev/md1 /dev/sd[bcdef]1
mdadm: no RAID superblock on /dev/sdf1
mdadm: /dev/sdf1 has no superblock - assembly aborted


30
Users / Re: URGENT 810 Software RAID failed after power outage
« on: July 16, 2013, 12:16:11 pm »
tried all the superblocks for sdb and none of them want to restore

Pages: 1 [2] 3 4 ... 18