Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Beeker

Pages: 1 2 [3]
31
Hoping some has some thoughts, I was using Pennytel temporarily for my VOIP until I could sort out a deal with TPG here in Oz and I must say the plan is not to bad 500mins free VOIP per month but they get you, as the min call is 10min. After you have used up your 500mins then you get charged 10c a call so overall it's not a bad deal. The only downside is that unless you buy there Dynalink ADSL Modem with VOIP then they offer very limited help, though they have sent me the following settings and I have put in the appropriate settings in the phone line config in the web admin page using aphone6.tpg.com.au as the host and the screen says Request Sent but it never registers...........by the way I have a Dynalink 502T which worked fine with Pennytel VOIP and I have ordered a Linksys ATA adapter to connect up our analogue phones ....does anybody have any ideas

Here are the VOIP settings you requested:
    Interface Name: pppoe_8_35_1
    SIP Transport Protocol: UDP   Port: 5060
    VoIP Service Provider: Others
    SIP Registrar Address, SIP Outbound Proxy and SIP Proxy Server Address: aphone6.tpg.com.au
    Ports: all on 5060
    Phone Number and Username: xxxxxxxx
    Password: your TPG password



32
Installation issues / HD Homerun Help
« on: January 26, 2010, 02:22:48 am »
I have mythtv 0.22 on 810 b2 running with a HD Homerun on the network here in Oz and I am feeding the same signal into both tuners how can I utilise both tuners i.e. one MD uses one tuner and another MD uses the other one....little bit confused have done a channel scan in mythtv setup and both tuners find the same channels......I was thinking I will have to rename the double up's something like ABC HDTV and ABC HDTV-1 so I can distinguish between the tuners. As usual any help is much appreciated

33
Installation issues / SOLVED I surrender
« on: January 24, 2010, 03:24:16 am »
After trashing my core and also going out and spending $200 to buy a HD Homerun, I have reinstalled 810 b2 only to find myth tv now does not work....is this a current bug do I have to downgrade myth to get the hd homerun working here in Australia. I have only done a apt-get update & upgrade is there anything I am missing here it can't be that hard.
The hd homerun has been detected and then I go to the computing page and there is no myth setup, also if I click on TV on a orbiter all the boxes go black and then you get the blue screen of death saying myth frontend has died any help would be much appreciated before the lot ends up on the front lawn

34
Installation issues / DVD new install 810 b2
« on: January 23, 2010, 01:43:56 am »
Unfortunatley I trashed my current core so I am in the middle of renstalling via DVD, I have re read the wikis and forum posts and I am still confused as to which of these we should do and which ones we use to keep up to date........to many conflicting stories can someone please confirm
 
apt-get update
apt-get upgrade
apt get dist upgrade

thanks
Beeker

35
Users / SOLVED Frustrated phone setup
« on: January 22, 2010, 04:59:53 pm »
Not having much luck lately either I am a complete numb nuts or I am missing something
Can anybody can help with two problems which I believe are related, I have a core/hybrid & 2 x md's. From the core I can make external VOIP calls (only testing at the moment just to see if it rings out will get to the voice part after I fix this problem) but when I try the other md's it just gives me the calling screen and never makes the actual call, I think somehow this is related to the fact that also cant make intercom or direct dial calls from either the core/hybrid to a md or md to md, I see the the call come up on the orbiter but it drops the call almost straight away

I have ssh into the core and done a sip show peers and I can see that the host for one of the md is unspecified but thats about as far as I go

dcerouter*CLI> sip show peers
Name/username              Host            Dyn Nat ACL Port     Status
pennytel/8889233285        202.85.243.87        N      5060     Unmonitored
203/203                    (Unspecified)    D   N      0        UNKNOWN
200/200                    192.168.80.1     D   N      5061     OK (7 ms)
3 sip peers [Monitored: 1 online, 1 offline Unmonitored: 1 online, 0 offline]


Tearing out what hair I have left

36
Installation issues / SOLVED VOIP....please help
« on: January 13, 2010, 09:39:47 am »
Hi All,
I have signed up with a VOIP company called Pennytel for the time being just to test out the VOIP features in Linuxmce 810 but cant get it to register, I have followed the wiki on setting "How to properly add support for SIP providers" but it fails to add the VOIP provider after I input all my user info.......any ideas

Desperate wife wants to kill me spending to much time on the PC

Beeker








37
Installation issues / Wii Remote
« on: January 02, 2010, 10:34:03 am »
Has anybody had any success in getting a wii remote to work with 810 beta 2.......have tried and no luck so far. Any tips would be greatly appreciated

Regards
Bruce

38
Installation issues / DVD CSS
« on: December 29, 2009, 08:01:18 pm »
Has there been any further progress in getting encrypted DVD's to play back in 710, have installed the latest css and have tried lots of ideas from the forums/wiki, but still the majority of ripped DVD's that were done on a windows pc refuse to play on the mce pc...........BTW all of them play in windows pc's

Any help would be much appreciated

Cheers
Bruce

39
Installation issues / 710 Software Raid & Playing .M2TS Files
« on: December 29, 2009, 04:49:29 pm »
Help
I have just built my Linuxmce PC using 710 and all works well, just have a couple of small niggling issues that others with more experience could help me over the line with as the wife is complaining about me staying up all night and googling forums.

I have set up a software raid in 710 which is working ok, the only issue I am having is saving photos and videos to userxx folders, when I drill down via the web admin i.e
> home
    > user_2
        > data
            [ videos ]
                > Raid Array [26]
I can see this structure, when I use a windows pc with content I have on it and browse to the linuxmce pc I get presented with the home and my user folder which I then click on and then the Raid Array folder and copy the content into that folder. Problem is that when I go back to the Linuxmce MD in the living room and check my folder there is nothing there, I made sure to do a resync as well.......any suggestions would be greatly appreciated.

Also the other issue is that when I copied HD quality .m2ts home videos into the public video folder then play either from the core/hybrid or on the other MD they are slightly choppy and have interlacing lines............currently running NVIDIA 7600GS cards in both PC's with 2GB ram......they play okay on XP pc and over the network to a TVIX 5130. I have tagged them as LinuxMCE Bluray files which made a slight improvment, plus I have updated the NVIDIA drivers to the latest ones from the NVIDIA web site as per one of the wiki instructions

Kind regards
Bruce

Pages: 1 2 [3]