Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dextaslab

Pages: 1 [2] 3 4 5
16
Users / Re: Android QOrbiter
« on: June 30, 2012, 08:28:37 am »
Got it installed on a Galaxy S2 and HTC Desire XL although it only displays 9 videos (8 of them are repeats) and 4 audio files in the listings and the video genre's are music based: eg; Jazz, Electronica, etc, which the buttons dont work, I'm not sure if these issues are what I should be see'ing or if it's qerk of my setup?

Cheers

17
Users / Re: Hacked??
« on: June 16, 2012, 03:07:57 pm »
PMSL  :D thats ok then, sry for spamming your server with what I believe was failed cron jobs

18
Users / Hacked??
« on: June 16, 2012, 02:46:47 pm »
Hi... yeah this is awkward... I was trolling the logs and found some wierd entries:

0 OK id=1Sfs8s-0006UR-5t)
Jun 16 20:30:14 dcerouter postfix/qmgr[14701]: A64141CA2DDE: removed
Jun 16 20:35:11 dcerouter postfix/pickup[22848]: BB3F81CA2DDD: uid=0 from=<root>
Jun 16 20:35:11 dcerouter postfix/cleanup[3513]: BB3F81CA2DDD: message-id=<20120616123511.BB3F81CA2DDD@fluffybitch.org>
Jun 16 20:35:11 dcerouter postfix/qmgr[14701]: BB3F81CA2DDD: from=<root@fluffybitch.org>, size=1800, nrcpt=1 (queue active)
Jun 16 20:35:12 dcerouter postfix/smtp[3515]: BB3F81CA2DDD: to=<root@fluffybitch.org>, orig_to=<root>, relay=mail.xzy.net[10.0.0.1]:25, delay=10, delays=10/0.02/0.12/0.36, dsn=2.0.0, status=sent (250 OK id=1SfsDg-0008NE-2s)

and also found these:
grep fluffybitch /etc/* -r
/etc/mailname:fluffybitch.org
/etc/postfix/main.cf.orig:myhostname = fluffybitch.org
/etc/postfix/main.cf.orig:mydestination = fluffybitch.org, localhost.org, , localhost
/etc/postfix/main.cf:myhostname = fluffybitch.org

Then googled and found this among many: http://pastebin.com/v168cg38

19
Users / Linux-headers included in the default MD tar.gz?
« on: June 14, 2012, 12:17:55 am »
Something that I've noticed for awhile is when your setting up a new MD and it's installing the graphics driver (for example, Nvidia driver) it takes a few minutes to extract all the smaller files of the kernel headers. In the past when I've been in a hurry I'd chroot into the diskless MD's directory and do it from the DCERouter, where it takes a few seconds. Is there any reason why it's not included in the tar? I don't remember seeing it to a dist-upgrade and installing a newer kernel than the one in the tar.

Cheers

20
Users / Re: Audio zone approach - which is best?
« on: June 08, 2012, 04:03:22 pm »
If your looking for a poor mans squeezeslave, these are what I have come up with:
WRT350Nv2 with USB sound card + amp: http://www.modlog.net/?p=202
Thin Client + second hand speakers: http://www.modlog.net/?p=219
Both boot in a few seconds and use very little power.

21
Users / Re: Android QOrbiter
« on: June 08, 2012, 02:23:50 pm »
After doing a long over due reinstall, the name now sticks in the admin webpage

22
Users / Re: 1004: The time has come.
« on: June 05, 2012, 03:11:36 pm »
Something is triggering the gamepad install script.
In my case it was my logitech universal receiver.

Got this from another thread...
http://forum.linuxmce.org/index.php/topic,12297.0.html

Karel

That explanes the second forced reboot, the console streams, "confirming <something>".... "Device installed" down the page until you reboot it, and at about 1 every 2-3 seconds, 400+ would be about right. After the second reboot they do stop and display driver, etc... starts

23
Users / Re: 1004: The time has come.
« on: June 04, 2012, 11:16:39 am »
Yeah, the first 3 issues where upstream installer issues - installer failes when selecting a different HDD to install to.
Currently using this: http://linuxmce.wordpress.com/2007/10/03/hack-5-howto-modify-network-configuration/ backwards to fix my NIC, which is all good now, I just have about 400+ USB game pads that installed on the headless core, which has no game pad attached.

24
Users / Re: 1004: The time has come.
« on: June 04, 2012, 10:12:55 am »
Just on 4th install, so far still stuck at networking issues - single network card, etc..

25
Users / Re: Android QOrbiter
« on: May 25, 2012, 03:16:17 pm »
Uninstalled qOrbiter and ministro, deleted Linuxmce folder, and reinstalled from Market, the results are the same, just have to run DDMS to get log.

can I get a confirmation on this: "... the username for the qOrbiter in the Admin Website is set and as soon as I do a quick reload, it disappears, is this supposed to happen? "

Cheers
New log is here: http://www.modlog.net/wp-content/uploads/2012/05/log2.txt

Looks pretty much the same :-(

26
Users / Re: Android QOrbiter
« on: May 22, 2012, 12:18:15 pm »
Uninstalled qOrbiter and ministro, deleted Linuxmce folder, and reinstalled from Market, the results are the same, just have to run DDMS to get log.

can I get a confirmation on this: "... the username for the qOrbiter in the Admin Website is set and as soon as I do a quick reload, it disappears, is this supposed to happen? "

Cheers

27
Users / Re: Android QOrbiter
« on: May 20, 2012, 10:57:39 am »
I too have a cheap-ass tablet running CyanogenMod 7, I've tried both software and GL versions and they both have failed, but I also noticed that going through the guide in the wiki, that the username for the qOrbiter in the Admin Website is set and as soon as I do a quick reload, it disappears, is this supposed to happen? The room name and other details remain.

The DDMS debugging log, config file contents and DCEROUTER.log for the latest release of the non-market version is here: http://www.modlog.net/wp-content/uploads/2012/05/log.txt
The tablet model is a Pendo Pad: TPC7SLV
It does create the Linuxmce folder when installed, and a default config, and if I change the number in it it does read it.
I have tried both horizontal and vertical modes, and turning off rotation

It loads the splash screen, displays the "Setting up Lmce" screen, if the orbiter number is correct, "go" goes red and it freezes and shutsdown. If the orbiter number is wrong it sudjests the correct device number which can slide up and down the screen, but when you click it "go" goes red and it freezes.

I have tried to set orbiter details in the web admin, run qOrbiterGenerator.php, quick reload, and then specified the username, but it still does the same.

From the DDMS log it looks like a code library related issue? libc.so vs libQtCore.so vs libqorbiter.so ? just a guess.
cheers hope this helps :-)

28
I like the idea of centralized audio, but wouldnt you get a fair bit of interfearance using speaker cables through out your house?

29
Users / Re: VIDEO CARDS: ATI, Intel, VIA... whatever you got...
« on: March 24, 2012, 02:11:54 pm »
Hmm, this is causing me problems with a net install on 1004.  The AVWizard pops up after each and every reboot.  I complete it successfully and orbiter loads, etc, etc... on reboot the AVWizard returns every time.  This may be fixed by issues you mentioned earlier and the newer 20120321 build, I'll check it tonight.

Same here, I have run apt-get upgrade on the MD and the Core is already updated, I have attached the Utils.sh and 0start_avwizard as text files.

Chipset is:  VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
It detects it correctly as an intel driver in xorg.conf

Cheers

30
Users / Re: New xine aspect ratio issue
« on: March 05, 2012, 01:57:23 am »
I have also tried:
DisplaySize     400 300

seems to make no difference, anyone got any ideas on forcing default aspect ratio for movie playback?

Pages: 1 [2] 3 4 5