Messages

61

Users / Android Orbiter 16:9 fails to show the bottom menu

« on: March 11, 2015, 11:08:28 am »

Hey,

Not sure what went wrong during my last restore. But seems that I can't get my android orbiter properly configured.

When I generate the orbiter with 4:3, it's working great. Except that the screen of my mobile isn't filled completely.
But when I generate it with 16:9, i'm missing my bottom menu (where you can select the rooms, users...), I just have the first icon.  And when I click on a 'scenario', the screen goes black. Nothing else.

Any idea how I could solve this?

62

Installation issues / Re: No incoming phone calls?

« on: March 09, 2015, 07:31:25 am »

I've changed the ALLOW_SIP_ANON to 'yes'.
And for the moment, i've got the feeling that all my calls are entering. Just hitting each time the voicemail of asterisk.

The strange thing is that in linuxmce, the phones are not registred.
But in asterisk, they are...

63

Installation issues / Re: No incoming phone calls?

« on: January 22, 2015, 10:55:00 am »

My house mode is unarmed.


Some extra info when a calls enters, and when it's forwarded to voicemail

Code: [Select]

== Using SIP RTP CoS mark 5
    -- Executing [121231212@from-trunk:1] Set("SIP/121231212-00000011", "__FROM_DID=121231212")
    -- Executing [121231212@from-trunk:2] Set("SIP/121231212-00000011", "PAI="1234121212" <sip:1234121212@91.208.12.133>")
    -- Executing [121231212@from-trunk:3] Set("SIP/121231212-00000011", "PAF="1234121212" <sip:1234121212@91.208.12.133>;tag=as1b68bc71")
    -- Executing [121231212@from-trunk:4] Set("SIP/121231212-00000011", "CURRENT_PAI_LENGTH=43")
    -- Executing [121231212@from-trunk:5] Set("SIP/121231212-00000011", "CURRENT_PAF_LENGTH=58")
    -- Executing [121231212@from-trunk:6] gotoif("SIP/121231212-00000011", "1 ? 11")
    -- Goto (from-trunk,121231212,11)
    -- Executing [121231212@from-trunk:11] noop("SIP/121231212-00000011", "config p asserted id ")
    -- Executing [121231212@from-trunk:12] set("SIP/121231212-00000011", "tmpcid=1234121212@91.208.12.133>")
    -- Executing [121231212@from-trunk:13] Set("SIP/121231212-00000011", "tmpcid=1234121212")
    -- Executing [121231212@from-trunk:14] Set("SIP/121231212-00000011", "CALLERID(num)=1234121212")
    -- Executing [121231212@from-trunk:15] Noop("SIP/121231212-00000011", "Incoming call from 1234121212")
    -- Executing [121231212@from-trunk:16] Set("SIP/121231212-00000011", "FAX_RX=")
    -- Executing [121231212@from-trunk:17] Set("SIP/121231212-00000011", "CALLERID(ani)=")
    -- Executing [121231212@from-trunk:18] Goto("SIP/121231212-00000011", "custom-linuxmce,102,1")
    -- Goto (custom-linuxmce,102,1)
    -- Executing [102@custom-linuxmce:1] AGI("SIP/121231212-00000011", "lmce-phonebook-lookup.agi")
    -- Launched AGI Script /usr/share/asterisk/agi-bin/lmce-phonebook-lookup.agi
    -- AGI Script Executing Application: (NoOp) Options: (Checking if name exists for 1234121212 in phone book and attempting to add caller name)
    -- AGI Script Executing Application: (NoOp) Options: (Number not found in phone book)
    -- <SIP/121231212-00000011>AGI Script lmce-phonebook-lookup.agi completed, returning 0
    -- Executing [102@custom-linuxmce:2] AGI("SIP/121231212-00000011", "lmce-gethousemode.agi")
    -- Launched AGI Script /usr/share/asterisk/agi-bin/lmce-gethousemode.agi
    -- AGI Script Executing Application: (Set) Options: (HOUSEMODE=1)
    -- <SIP/121231212-00000011>AGI Script lmce-gethousemode.agi completed, returning 0
    -- Executing [102@custom-linuxmce:3] Set("SIP/121231212-00000011", "CHANNEL(language)='en'")
    -- Executing [102@custom-linuxmce:4] Goto("SIP/121231212-00000011", "from-lmce-custom,102-hm1,1")
    -- Goto (from-lmce-custom,102-hm1,1)
    -- Executing [102-hm1@from-lmce-custom:1] Dial("SIP/121231212-00000011", "Local/200@trusted&Local/@trusted&Local/@trusted&Local/@trusted&Local/@trusted&Local/@trusted&Local/@trusted&Local/@trusted&Local/@trusted&Local/@trust")
    -- Called Local/200@trusted
[Jan 22 10:42:11] NOTICE[11641]: chan_local.c:899 local_call: No such extension/context @trusted while calling Local channel
    -- Couldn't call Local/@trusted
    -- Executing [200@trusted:1] Macro("Local/200@trusted-686f;2", "exten-vm,novm,200")
[Jan 22 10:42:11] NOTICE[11641]: chan_local.c:899 local_call: No such extension/context @trusted while calling Local channel
    -- Couldn't call Local/@trusted
    -- Executing [s@macro-exten-vm:1] Macro("Local/200@trusted-686f;2", "user-callerid") in new stack
    -- Executing [s@macro-user-callerid:1] NoOp("Local/200@trusted-686f;2", "user-callerid: 1234121212 1234121212") in new stack
    -- Executing [s@macro-user-callerid:2] Set("Local/200@trusted-686f;2", "AMPUSER=1234121212") in new stack
[Jan 22 10:42:11] NOTICE[11641]: chan_local.c:899 local_call: No such extension/context @trusted while calling Local channel
    -- Couldn't call Local/@trusted
    -- Executing [s@macro-user-callerid:3] GotoIf("Local/200@trusted-686f;2", "1?report") in new stack
    -- Goto (macro-user-callerid,s,13)
    -- Executing [s@macro-user-callerid:13] NoOp("Local/200@trusted-686f;2", "TTL:  ARG1: novm") in new stack
    -- Executing [s@macro-user-callerid:14] GotoIf("Local/200@trusted-686f;2", "0?continue") in new stack
    -- Executing [s@macro-user-callerid:15] Set("Local/200@trusted-686f;2", "__TTL=64") in new stack
[Jan 22 10:42:11] NOTICE[11641]: chan_local.c:899 local_call: No such extension/context @trusted while calling Local channel
    -- Couldn't call Local/@trusted
    -- Executing [s@macro-user-callerid:16] GotoIf("Local/200@trusted-686f;2", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,23)
    -- Executing [s@macro-user-callerid:23] NoOp("Local/200@trusted-686f;2", "Using CallerID "1234121212" <1234121212>") in new stack
    -- Executing [s@macro-exten-vm:2] Set("Local/200@trusted-686f;2", "FROMCONTEXT=exten-vm") in new stack
    -- Executing [s@macro-exten-vm:3] Set("Local/200@trusted-686f;2", "VMBOX=novm") in new stack
[Jan 22 10:42:11] NOTICE[11641]: chan_local.c:899 local_call: No such extension/context @trusted while calling Local channel
    -- Couldn't call Local/@trusted
    -- Executing [s@macro-exten-vm:4] Set("Local/200@trusted-686f;2", "EXTTOCALL=200") in new stack
    -- Executing [s@macro-exten-vm:5] Set("Local/200@trusted-686f;2", "CFUEXT=") in new stack
    -- Executing [s@macro-exten-vm:6] Set("Local/200@trusted-686f;2", "CFBEXT=") in new stack
    -- Executing [s@macro-exten-vm:7] Set("Local/200@trusted-686f;2", "RT=""") in new stack
[Jan 22 10:42:11] NOTICE[11641]: chan_local.c:899 local_call: No such extension/context @trusted while calling Local channel
    -- Couldn't call Local/@trusted
    -- Executing [s@macro-exten-vm:8] Macro("Local/200@trusted-686f;2", "record-enable,200,IN") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("Local/200@trusted-686f;2", "0?2:4") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] AGI("Local/200@trusted-686f;2", "recordingcheck,20150122-104211,1421919731.105") in new stack
    -- Launched AGI Script /usr/share/asterisk/agi-bin/recordingcheck
[Jan 22 10:42:11] NOTICE[11641]: chan_local.c:899 local_call: No such extension/context @trusted while calling Local channel
    -- Couldn't call Local/@trusted
[Jan 22 10:42:11] NOTICE[11641]: chan_local.c:899 local_call: No such extension/context @trusted while calling Local channel
    -- Couldn't call Local/@trusted
[Jan 22 10:42:11] NOTICE[11641]: chan_local.c:899 local_call: No such extension/context @trust while calling Local channel
    -- Couldn't call Local/@trust
 recordingcheck,20150122-104211,1421919731.105: Inbound recording not enabled
    -- <Local/200@trusted-686f;2>AGI Script recordingcheck completed, returning 0
    -- Executing [s@macro-record-enable:5] NoOp("Local/200@trusted-686f;2", "No recording needed") in new stack
    -- Executing [s@macro-exten-vm:9] Macro("Local/200@trusted-686f;2", "dial,"",tr,200") in new stack
    -- Executing [s@macro-dial:1] GotoIf("Local/200@trusted-686f;2", "1?dial") in new stack
    -- Goto (macro-dial,s,3)
    -- Executing [s@macro-dial:3] AGI("Local/200@trusted-686f;2", "dialparties.agi") in new stack
    -- Launched AGI Script /usr/share/asterisk/agi-bin/dialparties.agi
 dialparties.agi: Starting New Dialparties.agi
 dialparties.agi: Caller ID name is '1234121212' number is '1234121212'
       > dialparties.agi: USE_CONFIRMATION:  'FALSE'
       > dialparties.agi: RINGGROUP_INDEX:   ''
 dialparties.agi: Methodology of ring is  'none'
    -- dialparties.agi: Added extension 200 to extension map
       > dialparties.agi: Extension 200 has call screening off
    -- dialparties.agi: Extension 200 cf is disabled
    -- dialparties.agi: Extension 200 do not disturb is disabled
       > dialparties.agi: extnum 200 has:  cw: 0; hascfb: 0 [] hascfu: 0 []
 dialparties.agi: EXTENSION_STATE: 4 (UNAVAILABLE)
 dialparties.agi: Extension 200 has ExtensionState: 4
    -- dialparties.agi: Checking CW and CFB status for extension 200
    -- dialparties.agi: dbset CALLTRACE/200 to 1234121212
    -- dialparties.agi: Filtered ARG3: 200
    -- <Local/200@trusted-686f;2>AGI Script dialparties.agi completed, returning 0
    -- Executing [s@macro-dial:10] Dial("Local/200@trusted-686f;2", "SIP/200,"",tr") in new stack
[Jan 22 10:42:11] WARNING[11656]: app_dial.c:2218 dial_exec_full: Unable to create channel of type 'SIP' (cause 20 - Unknown)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [s@macro-dial:11] Set("Local/200@trusted-686f;2", "DIALSTATUS=CHANUNAVAIL") in new stack
    -- Executing [s@macro-exten-vm:10] Set("Local/200@trusted-686f;2", "SV_DIALSTATUS=CHANUNAVAIL") in new stack
    -- Executing [s@macro-exten-vm:11] GosubIf("Local/200@trusted-686f;2", "0?docfu,1") in new stack
    -- Executing [s@macro-exten-vm:12] GosubIf("Local/200@trusted-686f;2", "0?docfb,1") in new stack
    -- Executing [s@macro-exten-vm:13] Set("Local/200@trusted-686f;2", "DIALSTATUS=CHANUNAVAIL") in new stack
    -- Executing [s@macro-exten-vm:14] NoOp("Local/200@trusted-686f;2", "Voicemail is 'novm'") in new stack
    -- Executing [s@macro-exten-vm:15] GotoIf("Local/200@trusted-686f;2", "1?s-CHANUNAVAIL,1") in new stack
    -- Goto (macro-exten-vm,s-CHANUNAVAIL,1)
    -- Executing [s-CHANUNAVAIL@macro-exten-vm:1] PlayTones("Local/200@trusted-686f;2", "congestion") in new stack
    -- Executing [s-CHANUNAVAIL@macro-exten-vm:2] Congestion("Local/200@trusted-686f;2", "10") in new stack
    -- Local/200@trusted-686f;1 is circuit-busy
  == Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 2) exited non-zero on 'Local/200@trusted-686f;2' in macro 'exten-vm'
  == Everyone is busy/congested at this time (1:0/1/0)
  == Spawn extension (trusted, 200, 1) exited non-zero on 'Local/200@trusted-686f;2'
    -- Executing [h@trusted:1] Macro("Local/200@trusted-686f;2", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] ResetCDR("Local/200@trusted-686f;2", "w") in new stack
    -- Executing [s@macro-hangupcall:2] NoCDR("Local/200@trusted-686f;2", "") in new stack
    -- Executing [s@macro-hangupcall:3] GotoIf("Local/200@trusted-686f;2", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing [s@macro-hangupcall:6] GotoIf("Local/200@trusted-686f;2", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] GotoIf("Local/200@trusted-686f;2", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,11)
    -- Executing [s@macro-hangupcall:11] Hangup("Local/200@trusted-686f;2", "") in new stack
  == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'Local/200@trusted-686f;2' in macro 'hangupcall'
  == Spawn extension (trusted, h, 1) exited non-zero on 'Local/200@trusted-686f;2'
    -- Executing [102-hm1@from-lmce-custom:2] Goto("SIP/121231212-00000011", "from-lmce-custom,102-hm1-CONGESTION,1")
    -- Goto (from-lmce-custom,102-hm1-CONGESTION,1)
    -- Executing [102-hm1-CONGESTION@from-lmce-custom:1] Goto("SIP/121231212-00000011", "from-lmce-custom,100,1")
    -- Goto (from-lmce-custom,100,1)
    -- Executing [100@from-lmce-custom:1] Voicemail("SIP/121231212-00000011", "100")
    -- <SIP/121231212-00000011> Playing 'vm-intro.gsm' (language ''en'')
  == Spawn extension (from-lmce-custom, 100, 1) exited non-zero on 'SIP/121231212-00000011'

Some extra info when a call enters, and i'm hearing that the number is not in service:

Code: [Select]

  == Using SIP RTP CoS mark 5
    -- Executing [121231212@from-sip-external:1] NoOp("SIP/91.208.12.133-00000017", "Received incoming SIP connection from unknown peer to 121231212") in new stack
    -- Executing [121231212@from-sip-external:2] Set("SIP/91.208.12.133-00000017", "DID=121231212") in new stack
    -- Executing [121231212@from-sip-external:3] Goto("SIP/91.208.12.133-00000017", "s,1") in new stack
    -- Goto (from-sip-external,s,1)
    -- Executing [s@from-sip-external:1] GotoIf("SIP/91.208.12.133-00000017", "0?from-trunk,121231212,1") in new stack
    -- Executing [s@from-sip-external:2] Set("SIP/91.208.12.133-00000017", "TIMEOUT(absolute)=15") in new stack
Channel will hangup at 2015-01-22 10:55:54.605 CET.
    -- Executing [s@from-sip-external:3] Answer("SIP/91.208.12.133-00000017", "") in new stack
    -- Executing [s@from-sip-external:4] Wait("SIP/91.208.12.133-00000017", "2") in new stack
    -- Executing [s@from-sip-external:5] Playback("SIP/91.208.12.133-00000017", "ss-noservice") in new stack
    -- <SIP/91.208.12.133-00000017> Playing 'ss-noservice.gsm' (language 'en')
  == Spawn extension (from-sip-external, s, 5) exited non-zero on 'SIP/91.208.12.133-00000017'
    -- Executing [h@from-sip-external:1] NoOp("SIP/91.208.12.133-00000017", "Hangup") in new stack

64

Installation issues / Re: No incoming phone calls?

« on: January 22, 2015, 08:33:45 am »

Hey,

For the moment, i've got 7 internal SIP phones online, with status unmonitored.
And 1 SIP account (SIP-provider), but status unknown. Don't know if this is correct?

Strange thing is that sometimes, I can phone in, sometimes, the SIP provider answer that it's not registred. And sometimes I'm getting the answering of linuxmce (asterisk?).

65

Users / Re: Need some dedicated testers.

« on: January 21, 2015, 05:53:41 pm »

Yes, since 12 had a lot of issue to install (even nic card wasn't working out of the box, video card troubles...).
only 10 is 'stable', and we use linuxmce on daily base, so i gave up after 3 days with the 12.

Damned, was really motivated to have some great features for out home automation...

Thanks anyway. I'll have another try whenever 12 (14?) is a more stable version.

66

Users / Re: Need some dedicated testers.

« on: January 21, 2015, 03:50:25 pm »

damned, no luck... :$
I think it should be located under /usr/pluto/installers/. But at first sight, the file isn't on my server.

Code: [Select]

corius_1029915:/# locate .apk

corius_1029915:/# locate .msi
/usr/pluto/installers/OrbiterInstaller.msi
/usr/pluto/installers/PlutoBaSInstaller.msi
/usr/pluto/installers/PlutoRebootSetup.msi

corius_1029915:/# ll /usr/pluto/installers/
total 10620
drwxr-xr-x  2 root root    4096 2013-02-23 21:48 ./
drwxr-xr-x 18 root root    4096 2015-01-21 09:42 ../
-rw-r--r--  1 root root     401 2012-08-13 19:49 fremantle.install
-rw-r--r--  1 root root       0 2012-08-13 19:49 ImportContacts.zip
-rw-r--r--  1 root root  198764 2012-08-13 19:49 Orbiter.CAB
-rw-r--r--  1 root root 1663892 2012-08-13 19:49 Orbiter_CeNet4_x86.CAB
-rw-r--r--  1 root root 2002466 2012-08-13 19:49 Orbiter_CeNet4_XScale.CAB
-rw-r--r--  1 root root 3086699 2012-08-13 19:49 OrbiterCE_SDL.CAB
-rw-r--r--  1 root root 3427840 2012-08-13 19:49 OrbiterInstaller.msi
-rw-r--r--  1 root root  472064 2012-08-13 19:49 PlutoBaSInstaller.msi
-rw-r--r--  1 root root       0 2012-08-13 19:49 PlutoRebootSetup.msi
corius_1029915:/#

67

Users / Re: Need some dedicated testers.

« on: January 21, 2015, 03:07:57 pm »

When I install it (forwards me to http://deb.linuxmce.org/LinuxMCE-Orbiter.apk), it looks very like the old one. :$
And on the server, a new 'Generic Proxy Orbiter' has been added.

68

Users / Re: Need some dedicated testers.

« on: January 21, 2015, 10:56:47 am »

Then, from you android device, you can navigate to the webadmin page on the core.  At the webadmin login page there is a link to "Download Orbiter, Utilities and other software", click that and then you can download "Orbiter For Android Qt5". 

Just gave it a try, everything goes fine. Up to the point that i don't have an orbiter for QT in the list. Only an orbiter for Android.
I guess this isn't the same?

69

Users / Re: Need some dedicated testers.

« on: January 20, 2015, 12:48:55 pm »

Hey,

Hope you feel better...

Any idea when we could test this?

Else I'll need to invest some time to relaunch the old orbiters on our phones in order to have a working one... We use this mainly to control our house, so it's very usefull/necessary for us. Speciall since we don't have enough switches in our house to control everything... :$

70

Users / Re: Need some dedicated testers.

« on: January 10, 2015, 01:08:33 pm »

a day or two

Great, can't wait...
I'll be the first to test it.

Thanks!!!!

71

Users / Re: Need some dedicated testers.

« on: January 09, 2015, 05:58:52 pm »

Hey,

I'm trying to install the Qorbiter5 on a LG Nexus 5.

But unfortunelly i'm stuck somewhere.
The Qorbiter on my android phone 'hangs' on --- please wait, loading.... ---


I think that it's a problem with the server. Since I couldn't install it like written in http://wiki.linuxmce.org/index.php/Android_Orbiter.
The link "http://langstonball.com/qorbiter/setupQorbiter.sh" doesn't work me.

So I followed this manual: http://wiki.linuxmce.org/index.php/QOrbiter_Setup.
But I guess somewhere, I did something wrong... :$

72

Installation issues / No incoming phone calls?

« on: January 08, 2015, 02:19:41 pm »

Hey,

After a reinstallation of 1004, my incoming calls aren't working anymore.
I can call outside, I can call internally, but when you try to dial in, i'm directly forwarded to the voicemail.

When I check my phone devices, all phones are in there, but they're not registred? Not sure if that's normal?

Any clue what I can check?

I did an import of my old databases (pluto & asterisk).
I needed also to rename the files /usr/pluto/bin/configure_cisco79xx.pl since they crash my installation completely. My sql-database went crazy, and in my processes, a lot of these scripts were running.

73

Installation issues / Re: Installing 12.04

« on: December 23, 2014, 08:40:47 am »

Damned, just managed to install the 12 with another network card (chipset).
But i didn't configured a lot in the server, yet...

So now in doubt, would I retry the 14, or just stay with the 12...

74

Installation issues / Re: Installing 12.04

« on: December 14, 2014, 12:53:59 pm »

Thanks for the reply!

Installed earlier version already. The 12.04 doesn't recognize my network cards... Grrrrr.
Okay, i'll give it another try.

75

Installation issues / Installing 12.04

« on: December 13, 2014, 05:59:18 pm »

Hey,

I'm trying to install the 12.04 with the 'oh crap the dvd did not work for me' way.
      http://wiki.linuxmce.org/index.php/Installing_1204

But once i've downloaded the script, i encounter issues to download the soft:

root@corius:~# ./mce-install.sh
za dec 13 17:56:46 CET 2014 - Logging initiatilized to /var/log/LinuxMCE_Setup.log
za dec 13 17:56:46 CET 2014 - Performing an update and an upgrade to all components
Pakketlijsten worden ingelezen...
Boom van vereisten wordt opgebouwd...
De status informatie wordt gelezen...
0 pakketten opgewaardeerd, 0 pakketten nieuw geïnstalleerd, 0 te verwijderen en 0 niet opgewaardeerd.
za dec 13 17:56:57 CET 2014 - Synchronizing time with an online server
13 Dec 17:57:03 ntpdate[8790]: adjust time server 91.189.94.4 offset 0.060955 sec
za dec 13 17:57:03 CET 2014 - APT preference on number of retries already set 
za dec 13 17:57:03 CET 2014 - APT preference on number of retries set
za dec 13 17:57:03 CET 2014 - Installing necessary prep packages
Pakketlijsten worden ingelezen...
Boom van vereisten wordt opgebouwd...
De status informatie wordt gelezen...
debconf-utils is reeds de nieuwste versie.
dpkg-dev is reeds de nieuwste versie.
makedev is reeds de nieuwste versie.
0 pakketten opgewaardeerd, 0 pakketten nieuw geïnstalleerd, 0 te verwijderen en 0 niet opgewaardeerd.
za dec 13 17:57:03 CET 2014 - Creating necessary package files
dpkg-scanpackages: info: Wrote 0 entries to output Packages file.
za dec 13 17:57:04 CET 2014 - Configuring sources.list for MCE install
sed: expressie #1, teken 8: onbekende opdracht: 'u'
za dec 13 17:57:04 CET 2014 - Repository file:/usr/pluto/deb-cache/ubuntu-utopic-i386 ./ already active, moved to top
OK
W: Ophalen van http://deb.linuxmce.org/ubuntu/dists/utopic/main/binary-i386/Packages is mislukt  404  Not Found

E: Sommige indexbestanden konden niet worden opgehaald. Deze zijn genegeerd, of oude versies zijn gebruikt.
An error (Exit code 100) occured during the last action
apt-get update

Any clue?