J.
thx for the hint. Removing /etc/inittab  worked.
Now i will test diskless md incluson.
BR
Paulo

I will gladly do it, as soon i have it working

J.,
The first install was from the DVD, but i go so many problems that i decided to get the internet install, Today, i installed it the third time,
i reinstalled all, and for my surprise, AVWizard does not shows, and it goes directly for the simple interface.
Entering more -> advanced -> av setup,, it reboots and no AVWizard....
The previous install, two days ago, entered AVWizard.
It's driving me insane )))
Any hint?
BR

Finally, do you think we could get a FAQ going just about how 10.04 asterisk is supposed to work and the gotchas? Searching the forum and/or wiki gives you all the flavors of asterisk used to date and is highly inefficient. Since freepbx is no longer implemented, searching the web isn't useful as it assumes you are using freepbx as part of the solution.

That's really a good idea, because i'm doing it...searching all around about the config of the asterisk 1.8.11 realtime, Some info i could find, other not yet, and so, no telecom yet...

Sound like you have not enabled PXE boot or 'network boot' on the machine you are trying to use as an MD.  If you PXE boot the machine it will be automagically detected as an MD and install all the correct templates.  Do not attempt to do this manually!

J.

Hi J.
The whole environment is the same i had with 8.10, where the MD worked (core, md, switches, ip phones, ata, z-wave, etc... The only change is is the new 10.04.
Thats why i'm asking about template 28. Yes, i also did run the create TB?? (don't remember exactly the name) before trying to boot the md.
Thx,
Paulo

to be clear...

MDs do not use the hard drive. You set it to boot to the network in the machines bios. If it is asking you if you want to add a hard drive, then you would have to be connecting it after it is booted to... something else.

Because trying to have it automagically discoverr did not work... it asks if i want to add a file server... which is not the case.

Translation of the above: when i connect the diskless pc via the ethernet cable to the network, lmce 10.04 UI pops up a message asking if i want to add a new file server, which could not be, because the diskless pc does not contains a hard drive, and it uses the nfs exported drives.... and i did not say that MDs uses a hard drive. Or did i say and could not find it in the message?

so, any hint in how to solve? i guess not, so so, for the third time in 3 days i will install the whole system again from ground zero: spa3102 does not work, my sip line are mute for incoming and outgoing, the diskless media server is recognized as a file server.....

Because trying to have it automagically discoverr did not work... it asks if i want to add a file server... which is not the case.

Hya,
when i try to add a media director, generic pc as md, template 28, nothing is found, then i try via id of device template, 28 and get the following message: ERROR: the device template does not exist or invalid controlled via
What is wrong?
TIA
Paulo

Hya,

installing my sip line (voipcheap), i did note it did not register.
So, looking into the database, table ast_config, i noted that some directives were missing.

Code:

83 0 18 0 sip.conf general alwaysauthreject yes
85 0 18 0 sip.conf general nat                        yes
86 0 60 0 sip.conf general externhost        mydyndns.homeunix.org
87 0 5 0 sip.conf general externrefresh        5
88 0 60 0 sip.conf general localnet               192.168.80.0/255.255.255.0
89 0 9 0 sip.conf general allow                g729
90 0 10 0 sip.conf general allow                g723
91 0 101 0 sip.conf general register                pwollny:XXXXXXXXX@sip.voipcheap.com/2062036594

The 83 is very inportant for fail2ban and 85-88 to have the NAT.
I also would like to know which are the rules for cat_metric and var_metric.

Anyway, my sip line register, but i keep getting

Code:

> doing dnsmgr_lookup for 'sip.voipcheap.com'
       > doing dnsmgr_lookup for 'sip.voipcheap.com'
       > doing dnsmgr_lookup for 'sip.voipcheap.com'
       > doing dnsmgr_lookup for 'sip.voipcheap.com'
       > doing dnsmgr_lookup for 'sip.voipcheap.com'

in the asterisk verbose, i can place calls, but no sound incoming and outgoing and receiving a call is rejected with "no service message" in my asterisk.

Way to solve it?

TIA

when i select this, the MD directly reboots. And comes back to the original UI.
Seems that the wizard doesn't want to come up...

Same problem with UI here.

And the network delay is also too high. Rechecked cables, switches, interfaces, and all are ok, same used 5 days ago with lmce 8.10, when i decided to install 10.04.
Seems related to rsyslogd. I'm trying to find out what could be, but need to learn a lot of new configs, changed from kubuntu 8.10 to 10.04 LTS.

Hya,
lmce 10.04 installed, SIP line configured, asterisk shows it's registered

Code:

dcerouter*CLI> sip show registry
Host                                    dnsmgr Username       Refresh State                Reg.Time                
sip.voipcheap.com:5060                  N      pwollny            105 Registered           Sat, 15 Sep 2012 18:01:16
1 SIP registrations.

I call to the number from my mobile, no of the phones (obiter and cisco 7970) rings, i hear the message "the number...(ss-noservice.gsm)   and asterisk shows the following:

Code:

== config parameter meetmeopts '' != 'qxd'
    -- Added device 'SEP00137FFD944B' (7970)
    -- SEP00137FFD944B: asked our protocol capability (20).
    -- SEP00137FFD944B: Phone protocol capability : 12
    -- SEP00137FFD944B: Our protocol capability  : 20
    -- SEP00137FFD944B: Joint protocol capability : 11
    -- SEP00137FFD944B: Ask the phone to send keepalive message every 48 seconds
    -- SEP00137FFD944B: d->softkeyDefinition=!
    -- SEP00137FFD944B: Sending ConfigStatMessage, lines 1, speeddials 0
    -- SEP00137FFD944B: Device has 8 Capabilities
    -- Added extension '201' priority 1 to sccpregistration
    -- SEP00137FFD944B: Got Forward Status Request.  Line: 1
    -- SEP00137FFD944B: Device registered; performing post registration tasks...
 00000000 - 03 00 00 00 01 00 00 00 00 00 00 00             ............
    -- SCCP: Accepted connection from 192.168.80.131
    -- SCCP: Accepted connection from 192.168.80.131
    -- SCCP: Using ip 192.168.80.1
    -- SCCP: Using 245760 memory for this thread
  == Using SIP RTP CoS mark 5
    -- Executing [2062036594@from-sip-external:1] NoOp("SIP/sip.voipcheap.com-00000000", "Received incoming SIP connection from unknown peer to 2062036594") in new stack                                                                              
    -- Executing [2062036594@from-sip-external:2] Set("SIP/sip.voipcheap.com-00000000", "DID=2062036594") in new stack
    -- Executing [2062036594@from-sip-external:3] Goto("SIP/sip.voipcheap.com-00000000", "s,1") in new stack
    -- Goto (from-sip-external,s,1)
    -- Executing [s@from-sip-external:1] GotoIf("SIP/sip.voipcheap.com-00000000", "0?from-trunk,2062036594,1") in new stack
    -- Executing [s@from-sip-external:2] Set("SIP/sip.voipcheap.com-00000000", "TIMEOUT(absolute)=15") in new stack
Channel will hangup at 2012-09-15 18:01:08.718 BRT.
    -- Executing [s@from-sip-external:3] Answer("SIP/sip.voipcheap.com-00000000", "") in new stack
    -- Executing [s@from-sip-external:4] Wait("SIP/sip.voipcheap.com-00000000", "2") in new stack
    -- Executing [s@from-sip-external:5] Playback("SIP/sip.voipcheap.com-00000000", "ss-noservice") in new stack
    -- <SIP/sip.voipcheap.com-00000000> Playing 'ss-noservice.gsm' (language 'en')
    -- Executing [s@from-sip-external:6] PlayTones("SIP/sip.voipcheap.com-00000000", "congestion") in new stack
    -- Executing [s@from-sip-external:7] Congestion("SIP/sip.voipcheap.com-00000000", "5") in new stack
  == Spawn extension (from-sip-external, s, 7) exited non-zero on 'SIP/sip.voipcheap.com-00000000'
    -- Executing [h@from-sip-external:1] NoOp("SIP/sip.voipcheap.com-00000000", "Hangup") in new stack

When i try to place a call, it tries to call my DID number:

Code:

Verbosity was 3 and is now 4
    -- SEP00137FFD944B: Taken Offhook
    -- SEP00137FFD944B: Using line 201
    -- SCCP: SCCP/201-00000006,
capabilities: (slin16, ulaw/64k, alaw/64k, g729b, g729ab, g729, g729a, rfc2833)
preferences: (alaw/64k, alaw/56k, ulaw/64k, ulaw/56k)
remote caps: (nothing)
READ: (alaw/64k)
    -- SCCP: SCCP/201-00000006,
capabilities: (slin16, ulaw/64k, alaw/64k, g729b, g729ab, g729, g729a, rfc2833)
preferences: (alaw/64k, alaw/56k, ulaw/64k, ulaw/56k)
remote caps: (nothing)
        WRITE: (alaw/64k)
    -- SEP00137FFD944B: SCCP Digit: 00000009 (9) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : 0
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9 Matches more
    -- SEP00137FFD944B: SCCP Digit: 00000000 (0) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000000 (0) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000005 (5) on line 201
 SCCP: ENBLOC EMU Cancelled (time per digit '579' > maximum '400')
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9005 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000005 (5) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90055 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000002 (2) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900552 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000001 (1) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9005521 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90055218 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900552188 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9005521888 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000003 (3) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90055218883 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900552188838 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000006 (6) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9005521888386 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000001 (1) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90055218883861 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900552188838618 Match More
 SCCP: Timeout for call '6'. Going to dial '900552188838618'
    -- SCCP: Unable to cancel schedule ID 65.
    -- SEP00137FFD944B: (sccp_pbx_softswitch) New call on line 201
    -- SEP00137FFD944B: send callInfo of callid 6
    -- Executing [900552188838618@from-internal:1] Macro("SCCP/201-00000006", "dialout-trunk,SIP/2062036594,00552188838618,,")
    -- Executing [s@macro-dialout-trunk:1] Set("SCCP/201-00000006", "DIAL_TRUNK=SIP/2062036594") in new stack
    -- Executing [s@macro-dialout-trunk:2] Set("SCCP/201-00000006", "DIAL_NUMBER=00552188838618") in new stack
    -- Executing [s@macro-dialout-trunk:3] Set("SCCP/201-00000006", "ROUTE_PASSWD=") in new stack
    -- Executing [s@macro-dialout-trunk:4] GotoIf("SCCP/201-00000006", "1?noauth") in new stack
    -- Goto (macro-dialout-trunk,s,6)
    -- Executing [s@macro-dialout-trunk:6] GotoIf("SCCP/201-00000006", "0?disabletrunk,1") in new stack
    -- Executing [s@macro-dialout-trunk:7] Set("SCCP/201-00000006", "_NODEST=") in new stack
    -- Executing [s@macro-dialout-trunk:8] Set("SCCP/201-00000006", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:9] Set("SCCP/201-00000006", "GROUP()=DIAL_TRUNK") in new stack
    -- Executing [s@macro-dialout-trunk:10] Macro("SCCP/201-00000006", "user-callerid,SKIPTTL") in new stack
    -- Executing [s@macro-user-callerid:1] NoOp("SCCP/201-00000006", "user-callerid: pl_57 201") in new stack
    -- Executing [s@macro-user-callerid:2] Set("SCCP/201-00000006", "AMPUSER=201") in new stack
    -- Executing [s@macro-user-callerid:3] GotoIf("SCCP/201-00000006", "0?report") in new stack
    -- Executing [s@macro-user-callerid:4] GotoIf("SCCP/201-00000006", "0?start") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SCCP/201-00000006", "REALCALLERIDNUM=201") in new stack
    -- Executing [s@macro-user-callerid:6] NoOp("SCCP/201-00000006", "REALCALLERIDNUM is 201") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SCCP/201-00000006", "AMPUSER=201") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SCCP/201-00000006", "AMPUSERCIDNAME=") in new stack
    -- Executing [s@macro-user-callerid:9] GotoIf("SCCP/201-00000006", "1?report") in new stack
    -- Goto (macro-user-callerid,s,13)
    -- Executing [s@macro-user-callerid:13] NoOp("SCCP/201-00000006", "TTL:  ARG1: SKIPTTL") in new stack
    -- Executing [s@macro-user-callerid:14] GotoIf("SCCP/201-00000006", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,23)
    -- Executing [s@macro-user-callerid:23] NoOp("SCCP/201-00000006", "Using CallerID "pl_57" <201>") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SCCP/201-00000006", "record-enable,201,OUT") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SCCP/201-00000006", "0?2:4") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] AGI("SCCP/201-00000006", "recordingcheck,20120915-181545,1347743727.8") in new stack
    -- Launched AGI Script /usr/share/asterisk/agi-bin/recordingcheck
 recordingcheck,20120915-181545,1347743727.8: No AMPUSER db entry for 201. Not recording
    -- <SCCP/201-00000006>AGI Script recordingcheck completed, returning 0
    -- Executing [s@macro-record-enable:5] NoOp("SCCP/201-00000006", "No recording needed") in new stack
    -- Executing [s@macro-dialout-trunk:12] GotoIf("SCCP/201-00000006", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:13] Set("SCCP/201-00000006", "DIAL_TRUNK_OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:14] Macro("SCCP/201-00000006", "outbound-callerid,SIP/2062036594") in new stack
    -- Executing [s@macro-outbound-callerid:1] GotoIf("SCCP/201-00000006", "1?start") in new stack
    -- Goto (macro-outbound-callerid,s,3)
    -- Executing [s@macro-outbound-callerid:3] NoOp("SCCP/201-00000006", "REALCALLERIDNUM is 201") in new stack
    -- Executing [s@macro-outbound-callerid:4] GotoIf("SCCP/201-00000006", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,9)
    -- Executing [s@macro-outbound-callerid:9] Set("SCCP/201-00000006", "USEROUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:10] Set("SCCP/201-00000006", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:11] Set("SCCP/201-00000006", "TRUNKOUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:12] GotoIf("SCCP/201-00000006", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,16)
    -- Executing [s@macro-outbound-callerid:16] GotoIf("SCCP/201-00000006", "1?usercid") in new stack
    -- Goto (macro-outbound-callerid,s,18)
    -- Executing [s@macro-outbound-callerid:18] GotoIf("SCCP/201-00000006", "1?report") in new stack
    -- Goto (macro-outbound-callerid,s,22)
    -- Executing [s@macro-outbound-callerid:22] NoOp("SCCP/201-00000006", "CallerID set to "pl_57" <201>") in new stack
    -- Executing [s@macro-dialout-trunk:15] GotoIf("SCCP/201-00000006", "1?nomax") in new stack
    -- Goto (macro-dialout-trunk,s,17)
    -- Executing [s@macro-dialout-trunk:17] Set("SCCP/201-00000006", "OUTNUM=00552188838618") in new stack
    -- Executing [s@macro-dialout-trunk:18] Set("SCCP/201-00000006", "custom=SIP/2062036594") in new stack
    -- Executing [s@macro-dialout-trunk:19] GotoIf("SCCP/201-00000006", "1?gocall") in new stack
    -- Goto (macro-dialout-trunk,s,22)
    -- Executing [s@macro-dialout-trunk:22] GotoIf("SCCP/201-00000006", "0?customtrunk") in new stack
    -- Executing [s@macro-dialout-trunk:23] Dial("SCCP/201-00000006", "SIP/2062036594/00552188838618,300,") in new stack
  == Using SIP RTP CoS mark 5
    -- Called SIP/2062036594/00552188838618
    -- SEP00137FFD944B: send callInfo of callid 6
    -- SEP00137FFD944B: send callInfo of callid 6
    -- SIP/2062036594-00000003 is making progress passing it to SCCP/201-00000006
    -- SEP00137FFD944B: send callInfo of callid 6
    -- SIP/2062036594-00000003 answered SCCP/201-00000006
    -- SEP00137FFD944B is Onhook
  == SEP00137FFD944B: Ending call 6 on line 201 (Progress)
    -- hangup SCCP/201-00000006: hasPbx yes; ast state: Dialing, sccp state: Progress, blocking: yes, already being hungup: no, hangupcause: 16
    -- SCCP/201-00000006: send ast_queue_hangup
    -- SCCP/201-00000006: send ast_queue_hangup
    -- Executing [h@macro-dialout-trunk:1] Macro("SCCP/201-00000006", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] ResetCDR("SCCP/201-00000006", "w") in new stack
    -- Executing [s@macro-hangupcall:2] NoCDR("SCCP/201-00000006", "") in new stack
    -- Executing [s@macro-hangupcall:3] GotoIf("SCCP/201-00000006", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing [s@macro-hangupcall:6] GotoIf("SCCP/201-00000006", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] GotoIf("SCCP/201-00000006", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,11)
    -- Executing [s@macro-hangupcall:11] Hangup("SCCP/201-00000006", "") in new stack
  == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SCCP/201-00000006' in macro 'hangupcall'
  == Spawn extension (macro-dialout-trunk, h, 1) exited non-zero on 'SCCP/201-00000006'
  == Spawn extension (macro-dialout-trunk, s, 23) exited non-zero on 'SCCP/201-00000006' in macro 'dialout-trunk'
  == Spawn extension (from-internal, 900552188838618, 1) exited non-zero on 'SCCP/201-00000006'
    -- SEP00137FFD944B: Received Feature Change Event: monitor(6)
    -- SEP00137FFD944B: StorageBackend got Feature Change Event: monitor(6)
    -- SEP00137FFD944B: send callInfo of callid 6

As i understand, voipcheap is registered, my DID id working (routing to my voipcheap account), but no incoming.
Outgoing is also wrong.
I'm not being able to find out what is wrong. Is there someome more experienced than me that could help?
Under 8.10, it worked like a charm, now, is working with no charm at all
TIA,
Paulo

Paulo

try this link


http://www.intersete.com.br/mp3_128.m3u


 work for me

Thx Carlos, ithis way is working... since your last post, for which i did thank you.
I just saked for Sambuca to test to make sure that m3u from swisspop was not working....

Thx for the info, Carlos.
Sambuca, would you kindly test the link i informed and report if it works right, just to be sure?
BR

Hya,
is there any user using a working PSTN SPA3102 WITH lmce 10.04?
I'm really facing problems, and so, if someone have it working, i would like to talk about.
Any good soul?
BR,
Paulo

Hya,

is file type .m3u supported under the radio scenario?
Tested .pls and works well, but .m3u does not play.
Example: http://www.radioswisspop.ch/live/mp3.m3u
If supported, what is to be done?

BR,

Paulo