Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - pw44

Pages: 1 ... 4 5 [6] 7 8
76
Users / PnPQueue question
« on: April 15, 2010, 01:02:11 am »
Hia,
after my bluetooth phone have been detected, from some time to now, it does not connect anymore.
Reading the http://wiki.linuxmce.org/index.php/Re-Detecting_Plug_and_Play_Devices wiki, it could be the solution for making it be detected again.
But it also poses another problem: all the detected devices working would be detected and configured again, and i think it's undesireble.
Is there a way to only delete the entry for one device, instead of deleting all?
TIA,
Paulo

77
Installation issues / UPDATE removed my IR Devices.
« on: April 14, 2010, 09:42:04 pm »
Hia,
after running apt-get update and apt-get upgrade today, the database was updated, but the device template for my amplifier is gone - all the IR codes were uncorrectly assigned. Investigating, i figured that Uses Group/Codeset (under AV Devices -> AV Properties) were changed to a "pronto codeset" instead of mantaining the codeset i earlier defined.. The templates for my tape dek and my tuner are there correct.
Could someone please explain why did it happen?
TIA,
Paulo

78
Users / [SOLVED] Flooplan wizard problem - drag does not work.
« on: April 03, 2010, 08:04:41 pm »
Hia,
trying to create a flooplan, i got the following problem:
created the PNG image (whole house) and  uploaded it. ok. it shows right.
when selecting i.e entretainment zone, i get living and master bedroom.
Trying to drag living to the image (png) fails. The same with master bedroom.
I did see the youtube video, where the flooplan shows for the entire home.
Is there any trick to make it work?
TIA,
Paulo

79
Users / Audio settings for media type.
« on: March 28, 2010, 06:18:32 pm »
Hia,
maybe it's not the right place to post this, but could not find the answer anywhere, so  ihope to get a little help from the developers.
How do i set the audio mode for a media type. i.e. Live TV will switch the DSP mode off and have stereo, Video will switch the DSP mode to ON and select Movie Theather, Audio will select the DSP mode to ON and select Concert Hall?
I'm asking this because i did not find where to define it and because when i select Live TV, DSP mode is switched to ON and mode to Dolby Digital Enhanced, and this produces no sound, so i have to stand up and switch manually the mode.
TIA,
Paulo

80
Installation issues / selecting the correct DSP mode for given source.
« on: March 28, 2010, 01:54:42 am »
Hia,
after defining the template for my dsp amplifier, with most of it's dsp modes, i found out that it allways selects a dsp mode for the given source, i.e, selecting TV on OSD menu selects the correct audio input and a DSP mode (incorrect for me).
Question:
how can i define the DSP mode for the given source, i.e, videos = effect on -> dolby pro logic, audio = effect on -> music hall,  TV = effect off -> PCM?
Is there a way to set it up?
TIA,
Paulo

81
Hia,
since the installation of my lmce, i get this There some devices on ths media director that did no correctly start.... message when regenerating the orbiter and reloading the router.
Did dig the log files but did not find anything.
All the installed devices are working (telecom, security ip camera...)
Any hint of what could be generating this message? Ok. i now what it means but not finding why.
TIA

82
Installation issues / Pronto Codeset for IR devices
« on: March 24, 2010, 02:45:45 pm »
Hia,
i would like to know how to create a pronto codeset without using and adapting an existing one.
I did create a template for my Yamaha devices, and some pronto codesets were presented, and i adapted one of them for my DSP-A1. For some reson that i not being able to figure, after running setup wizard, the template created got double entries with the wrong codes, i.e. all the work i had in editing the template, cutting and pasting the correct codes, deleting not existing entries for my device and adding others for it, got screwed (it's not the first time it occurs, but i want to make it the last).
So i thing that the best is create a brand new codeset, without using as base an existing one.
Is there a tutorial or wiki in how to create the codeset and associate it to the device template?
TIA,
Paulo

83
Users / MPlayer_player behavior differences.
« on: March 23, 2010, 01:31:10 pm »
Hia,
after setting my MD up, i've found a behavior difference between my code/hybrid and my MD.
On my MD, when playing a .mkv file (MPlayer_player is used), for example, when type #, the language is changed, right arrow skips forward, left arrow skips back, bu twhen doing the same on my core/hybrid, none of this works ( #, ->, <- ). I did check the /root/.mplayer/config on both and they are the same.
Could someone explain why the different behavior?
TIA

84
Users / MPlayer_player does not end after OFF or end of playback
« on: March 21, 2010, 10:52:16 pm »
Hia,

i'm getting a problem with MPlayer_player. The process does not ends after terminating a playback or when forcing stop (OFF).
It stays until it's killed under kde desktop.
The log i get is as follows.

Code: [Select]
05      03/21/10 17:57:15.361           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Selected video codec: [ffmpeg12vdpau] vfm: ffmpeg (FFmpeg MPEG-1/2 (VDPAU))| <0xb5
9a4b90>
05      03/21/10 17:57:15.361           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |==========================================================================| <0xb59
a4b90>
05      03/21/10 17:57:15.361           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Audio: no sound| <0xb59a4b90>
05      03/21/10 17:57:15.361           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Starting playback...| <0xb59a4b90>
05      03/21/10 17:57:15.361           MPlayer_Player::Log [EngineOutputReader] Playback started: /usr/pluto/share/black.mpeg <0xb59a4b90>
05      03/21/10 17:57:15.361           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |[VD_FFMPEG] XVMC-accelerated MPEG-2.| <0xb59a4b90>
05      03/21/10 17:57:15.607           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.| <0xb59a4b90>
05      03/21/10 17:57:15.608           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |VO: [vdpau] 640x480 => 640x480 MPEG2 VDPAU acceleration  [fs]| <0xb59a4b90>
05      03/21/10 17:57:15.676           PlayerEnginePoll - detected playlist entry change: /home/public/data/videos/Software R
aid 5 [27]/Movies/Up (2009).m2ts -> /usr/pluto/share/black.mpeg <0xb49a2b90>
05      03/21/10 17:57:15.882           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |ANS_AUDIO_CODEC=''| <0xb59a4b90>
05      03/21/10 17:57:15.882           MPlayer_Player::Log [EngineOutputReader] Found answer: ANS_AUDIO_CODEC='', but ignoring it as it is related to empty mpeg file <0xb59a4b90>
05      03/21/10 17:57:15.976           MPlayer_Player::Log Failed to get stream audio codec <0xb49a2b90>
05      03/21/10 17:57:16.277           MPlayer_Player::Log Failed to get stream video codec <0xb49a2b90>
05      03/21/10 17:57:16.277           MPlayer_Player::EVENT_Playback_Started(streamID=1003) <0xb49a2b90>
05      03/21/10 17:57:16.278           MPlayer_Player::UpdateTracksInfo - detecting count of tracks <0xb49a2b90>
05      03/21/10 17:57:16.278           MPlayer_Player::UpdateTracksInfo - detect command: /opt/pluto-ffmpeg/bin/ffmpeg -i "/usr/pluto/share/black.mpeg" 2>&1 | grep "Stream.*Audio" > /tmp/MPlayer_26.ffmpeg.info <0xb49a2b90>
05      03/21/10 17:57:16.293           MPlayer_Player::UpdateTracksInfo - detect command returned code: 256 <0xb49a2b90>
05      03/21/10 17:57:16.294           MPlayer_Player::UpdateTracksInfo - no audio tracks found <0xb49a2b90>
05      03/21/10 17:57:16.594           MPlayer_Player::Log Failed to get stream time position <0xb49a2b90>
05      03/21/10 17:57:16.894           MPlayer_Player::Log Failed to get stream time length <0xb49a2b90>
05      03/21/10 17:57:17.693           MPlayer_Player::Log Failed to get stream time position <0xb49a2b90>
05      03/21/10 17:57:17.993           MPlayer_Player::Log Failed to get stream time length <0xb49a2b90>
05      03/21/10 17:57:18.793           MPlayer_Player::Log Failed to get stream time position <0xb49a2b90>
05      03/21/10 17:57:19.093           MPlayer_Player::Log Failed to get stream time length <0xb49a2b90>
05      03/21/10 17:57:19.893           MPlayer_Player::Log Failed to get stream time position <0xb49a2b90>
........
05      03/21/10 18:38:35.014           MPlayer_Player::Log Failed to get stream time length <0xb49a2b90>
05      03/21/10 18:38:35.812           MPlayer_Player::Log Failed to get stream time position <0xb49a2b90>
05      03/21/10 18:38:36.112           MPlayer_Player::Log Failed to get stream time length <0xb49a2b90>
05      03/21/10 18:38:36.914           MPlayer_Player::Log Failed to get stream time position <0xb49a2b90>
05      03/21/10 18:38:37.214           MPlayer_Player::Log Failed to get stream time length <0xb49a2b90>
05      03/21/10 18:38:38.016           MPlayer_Player::Log Failed to get stream time position <0xb49a2b90>
05      03/21/10 18:38:38.317           MPlayer_Player::Log Failed to get stream time length <0xb49a2b90>
05      03/21/10 18:38:39.006           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Exiting... (Quit)| <0xb59a4b90>
05      03/21/10 18:38:39.116           MPlayer_Player::Log Failed to get stream time position <0xb49a2b90>
Return code: 141
3       03/21/10 18:38:39       26 (spawning-device)    Device died... count=1/50 dev=26
Sun Mar 21 18:38:39 BRT 2010 died
========== NEW LOG SECTION ==========
1       03/21/10 18:38:49       26 (spawning-device)    Starting... 2
1       03/21/10 18:38:49       26 (spawning-device)    Found ./MPlayer_Player

Is there any problem which could not let MPlayer_player to stop normally?

TIA

85
Users / mythtv failing to play on MD
« on: March 20, 2010, 08:14:05 pm »
Hia
after installing the diskless MD, apt-get update and apt-get upgrade it, i'm getting a problem when trying to watch live tv on the MD. The mythtv screen appears, and fail with a "video frame buffering failed too many times" message, and stops.
Does someone knows what could be the reason for this and how to fix it?
TIA

86
Installation issues / webamin help - support pages missing
« on: March 20, 2010, 08:05:47 pm »
Hia,
today i tried to lauch the help / support pages on webadmin and found out they doesn't exist.
example: http://localhost/support/index.php?section=document&docID=137
Also tried cd /; find . -name support -print
No matches.
Are these pages downloadable anywhere?
TIA

87
Users / MPlayer fails to play on Media Director
« on: March 15, 2010, 05:33:14 pm »
Hia,
after setting my first diskless MD up, i've found that MPlayer_player was not doing it's job.
Trying to play a .m2ts file gave my a grey screen and nothing was happening.
So, after an apt-get install and apt-get update, pluto_mplayer was installed.
Did also nedd to apt-get install w32codecs.
After that, trying to play the same file, i got a black screen. Looking at the log, there's a FATAL ERROR.
mplayer (under KDE Desktop on MD) plays the file and on my core/hybrid, the file is also played by MPlayer_Player.
The MD has a Geforce 6800, an 1024x760 monitor on the VGA port, Video Card = Geforce or TNT2, hardware acceleration = vdpau, Deinterlace quality = high.
Is there anything missing or overkilled?
TIA,
Paulo

Code: [Select]

05      03/15/10 13:14:51.137           MPlayer_Player::UpdateTracksInfo - detect command: /opt/pluto-ffmpeg/bin/ffmpeg -i "/home/public/data/videos/Software Raid 5 [27]/Movies/Blade Runner (1982).m2ts" 2>&1 | grep "Stream.*Audio" > /tmp/MPlayer_93.ffmpeg.info <0xb70b2b90>                                       
05      03/15/10 13:14:51.250           MPlayer_Player::UpdateTracksInfo - detect command returned code: 256 <0xb70b2b90>                                                                                       
05      03/15/10 13:14:51.251           MPlayer_Player::UpdateTracksInfo - no audio tracks found <0xb70b2b90>                                                                                                   
05      03/15/10 13:14:51.251           MPlayer_Player::CMD_Set_Media_ID is not implemented <0xb70b2b90>
05      03/15/10 13:14:51.921           MPlayer_Player::Log Failed to get stream time position <0xb50aeb90>                                                                                                     
05      03/15/10 13:14:52.221           MPlayer_Player::Log Failed to get stream time length <0xb50aeb90>                                                                                                       
05      03/15/10 13:14:53.020           MPlayer_Player::Log Failed to get stream time position <0xb50aeb90>                                                                                                     
05      03/15/10 13:14:53.321           MPlayer_Player::Log Failed to get stream time length <0xb50aeb90>                                                                                                       
......... lots of same ..............
05      03/15/10 13:15:08.420           MPlayer_Player::Log Failed to get stream time position <0xb50aeb90>                                                                                                     
05      03/15/10 13:15:08.721           MPlayer_Player::Log Failed to get stream time length <0xb50aeb90>                                                                                                       
05      03/15/10 13:15:09.520           MPlayer_Player::Log Failed to get stream time position <0xb50aeb90>                                                                                                     
05      03/15/10 13:15:09.821           MPlayer_Player::Log Failed to get stream time length <0xb50aeb90>                                                                                                       
05      03/15/10 13:15:10.620           MPlayer_Player::Log Failed to get stream time position <0xb50aeb90>                                                                                                     
05      03/15/10 13:15:10.921           MPlayer_Player::Log Failed to get stream time length <0xb50aeb90>                                                                                                       
05      03/15/10 13:15:11.090           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Playing /usr/pluto/share/black.mpeg.| <0xb60b0b90>                                                           
05      03/15/10 13:15:11.090           MPlayer_Player::Log [EngineOutputReader] Playback preinit for file: /usr/pluto/share/black.mpeg <0xb60b0b90>                                                           
05      03/15/10 13:15:11.093           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |AVI file format detected.| <0xb60b0b90>                                                                       
05      03/15/10 13:15:11.093           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |[aviheader] Video stream found, -vid 0| <0xb60b0b90>                                                         
05      03/15/10 13:15:11.093           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |AVI: No audio stream found -> no sound.| <0xb60b0b90>                                                         
05      03/15/10 13:15:11.093           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |VIDEO:  [mpg2]  640x480  24bpp  25.000 fps  945.4 kbps (115.4 kbyte/s)| <0xb60b0b90>                         
05      03/15/10 13:15:11.093           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Clip info:| <0xb60b0b90>                                                                                     
05      03/15/10 13:15:11.093           MPlayer_Player::Log [EngineOutputReader] Analyzing line: | Software: MEncoder dev-SVN-r24750-4.1.3| <0xb60b0b90>                                                       
05      03/15/10 13:15:11.095           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |==========================================================================| <0xb60b0b90>                     
05      03/15/10 13:15:11.095           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Forced video codec: ffh264vdpau| <0xb60b0b90> 
05      03/15/10 13:15:11.095           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Forced video codec: ffmpeg12vdpau| <0xb60b0b90>                                                               
05      03/15/10 13:15:11.095           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family| <0xb60b0b90>                               
05      03/15/10 13:15:11.095           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Selected video codec: [ffmpeg12vdpau] vfm: ffmpeg (FFmpeg MPEG-1/2 (VDPAU))| <0xb60b0b90>                     
05      03/15/10 13:15:11.095           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |==========================================================================| <0xb60b0b90>                     
05      03/15/10 13:15:11.095           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Audio: no sound| <0xb60b0b90>                                                                                 
05      03/15/10 13:15:11.095           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Starting playback...| <0xb60b0b90>                                                                           
05      03/15/10 13:15:11.095           MPlayer_Player::Log [EngineOutputReader] Playback started: /usr/pluto/share/black.mpeg <0xb60b0b90>                                                                     
05      03/15/10 13:15:11.096           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |[VD_FFMPEG] XVMC-accelerated MPEG-2.| <0xb60b0b90>                                                           
05      03/15/10 13:15:11.096           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Could not find matching colorspace - retrying with -vf scale...| <0xb60b0b90>                                 
05      03/15/10 13:15:11.096           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Opening video filter: [scale]| <0xb60b0b90>                                                                   
05      03/15/10 13:15:11.096           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |The selected video_out device is incompatible with this codec.| <0xb60b0b90>                                 
05      03/15/10 13:15:11.096           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Try appending the scale filter to your filter list,| <0xb60b0b90>                                             
05      03/15/10 13:15:11.096           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |e.g. -vf spp,scale instead of -vf spp.| <0xb60b0b90>                                                         
05      03/15/10 13:15:11.096           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |[mpegvideo_vdpau @ 0x88ae6e0]| <0xb60b0b90>                                                                   
05      03/15/10 13:15:11.096           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |get_buffer() failed (-1 0 0 (nil))| <0xb60b0b90>                                                             
05      03/15/10 13:15:11.097           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |Error while decoding frame!| <0xb60b0b90>                                                                     
05      03/15/10 13:15:11.097           MPlayer_Player::Log [EngineOutputReader] Analyzing line: |FATAL: Could not initialize video filters (-vf) or video output (-vo).| <0xb60b0b90>                         
05      03/15/10 13:15:11.420           PlayerEnginePoll - detected playlist entry change: /home/public/data/videos/Software Raid 5 [27]/Movies/Blade Runner (1982).m2ts -> /usr/pluto/share/black.mpeg <0xb50aeb90>                                                                                                   
05      03/15/10 13:15:11.721           MPlayer_Player::Log Failed to get stream audio codec <0xb50aeb90>                                                                                                       
05      03/15/10 13:15:12.021           MPlayer_Player::Log Failed to get stream video codec <0xb50aeb90>                                                                                                       
05      03/15/10 13:15:12.021           MPlayer_Player::EVENT_Playback_Started(streamID=1004) <0xb50aeb90>                                                                                                     
05      03/15/10 13:15:12.021           MPlayer_Player::UpdateTracksInfo - detecting count of tracks <0xb50aeb90>                                                                                               
05      03/15/10 13:15:12.021           MPlayer_Player::UpdateTracksInfo - detect command: /opt/pluto-ffmpeg/bin/ffmpeg -i "/usr/pluto/share/black.mpeg" 2>&1 | grep "Stream.*Audio" > /tmp/MPlayer_93.ffmpeg.info <0xb50aeb90>                                                                                         
05      03/15/10 13:15:12.048           MPlayer_Player::UpdateTracksInfo - detect command returned code: 256 <0xb50aeb90>                                                                                       
05      03/15/10 13:15:12.049           MPlayer_Player::UpdateTracksInfo - no audio tracks found <0xb50aeb90>                                                                                                   
05      03/15/10 13:15:12.349           MPlayer_Player::Log Failed to get stream time position <0xb50aeb90>                                                                                                     
05      03/15/10 13:15:12.650           MPlayer_Player::Log Failed to get stream time length <0xb50aeb90>                                                                                                       
05      03/15/10 13:15:12.650           Socket::SendData sendbytes==0 <0xb50aeb90>                     
05      03/15/10 13:15:12.736           TCPIP: Closing connection to -1 (m_pTimecodeNotificationSocket) 0x9720250 m_Socket: -1 <0xb58afb90>                                                                     
05      03/15/10 13:15:13.448           MPlayer_Player::Log Failed to get stream time position <0xb50aeb90>                                                                                                     
05      03/15/10 13:15:13.749           MPlayer_Player::Log Failed to get stream time length <0xb50aeb90>                                                                                                       
05      03/15/10 13:15:14.548           MPlayer_Player::Log Failed to get stream time position <0xb50aeb90>                                                                                   


88
Installation issues / Version for NVIDIA packages
« on: March 15, 2010, 10:26:23 am »
Hia,
I would like to know which versions are the right ones for lmce:
   nvidia-173-modaliases = 173.14.12-1-0ubuntu5.1
   nvidia-177-modaliases = 177.82-0ubuntu0.1
   nvidia-180-modaliases = 180.60-0ubuntu9
   nvidia-195-kernel-source = 195.36.08-0ubuntu1
   nvidia-195-libvdpau = 195.36.08-0ubuntu1
   nvidia-71-modaliases = 71.86.04-0ubuntu10
   nvidia-96-modaliases = 96.43.09-0ubuntu1.1
   nvidia-common = 0.2.4.2
   nvidia-glx-195 = 195.36.08-0ubuntu1
   nvidia-settings = 190.36-0ubuntu5

For nvidia-195-libvdpau and nvidia-glx-195 there are ubuntu and lmce versions. Which is to be used?

TIA,

Paulo

89
Users / AV connections not being controlled
« on: March 11, 2010, 07:09:12 pm »
Hia,
after configuring my AV equipment, i notice that when i open a (UI -> Media) media like video or audio, the amplifier turns on, selects the correct input and it's ok, but when i select KX-390 (UI -> Media), the correct input is not selectd at the amplifier. Testing the AV Propertiesfor KX-390 and DSP-A1 at webadmin -> A/V Equipment, all the IR codes works well, including the input selector for the amplifier.
The other thing that i'm not being able to do is to power off the amplifier when stopping media. When orbiter starts, it turns the amplifier on. When media starts and the amplifier is off, IR code for turnning it on are sent and works. But how to turn it off withoput the need to stay up and doing it manually?
Does anyone experienced something like this?
Attached are the snapshots for connection and devices.
TIA,
Paulo

90
Hia,
the linksys pap2t-na has 2 FXS ports and only 1 mac address and ip address.
Is it possible to define extension numbers for each of the FXS ports, i.e, FXS1 = extendion 206 and FXS2 = extension 207?
Also considering that you can assign an extension to an user, so when you receive a call, the voice prompts "to dial Paulo, press 1, to dial Paulchen, press 2, to dial Bruna, press 3",  can i create an user called Paulo-Mobile, with extension 204 and an user called fax, with extension 205, so the prompt also continues "to dial Paulomobile, press 4, to dial fax, press 5", so when 4 is selected, it would ring my mobile phone (sip client) and 5 seleted would ring the fax machine?
I did read the wiki http://wiki.linuxmce.org/index.php/Nokia_E65 and found it fantastic, but using this instructions, i can create an extension in asterisk, but how would the prompt recognize it and direct an incoming call to it, because no phone for it is created in webadmin, so, the extension assigned using this wiki is not a "known" extension for webamin and the whole integration?
TIA
Paulo

Pages: 1 ... 4 5 [6] 7 8