just got the mobo and its buit in so unless is a way to make a pci pxe boot the board is just a paper weight. wish knew realtek's were such a nightmare before got it
made a little progress lsmod now showing the r8168 as loaded not the 69 but the core is again dead considering putting on hold and ordering an intel gigabit nic for the core and tackle the MD again after that.
no that just what im working on the fact we are both looking at the same thing makes me sure on the right track in looking ive seen the same the core is loading the r8169 on a lsmod check and looks like the md image needs the r8168 how ever as i run the ./autorun.sh it removes the r8169 and replaces with the r8168 breaking the core and making 192.168.80.1 unreachable im not that great with linux yet so got that far need to look up instructions for manual install so it dose not remove the 69 driver module. lol looks like this is what i get tring to make the entire local network gigabit ><
didnt have any luck with that and realized the core has the exact same built in eth when i got the driver from realtek and installed it broke the core but it must be working as the core has exact same eth im entering the module name as r8169 i even reversed the setup and made this board the core and the core the MD exact same issue. going to keep trying see if i can nail the issue.
i have the same model used it on previous install not tried it on 1004 yet ill hook it up later tonight and see if works fine and post setting to see if can find the issue
Edit: just noticed you have 192.168.80.133 as the nas ip thats outside for non lmce devices how is it getting that number do you have the nas set to dhcp and lmce is treating it as a windows device or did you set that as a static on the nas?
having issue getting new md to work 1004 Board: ECS A960M-M3 Eth: Realtek RtL8111E Gigabit Lan diskless is working on my test laptop starts to PXE boot but seams to halt at [ 0.287129] [<c0104087>] Kernel_thread_helper+0x7 /0x10 before it even anounces to router any suggestion what i can do to correct this issue or am wasting my time with this board or is it the eth card
learned lesson on the 2 nics lastime around on 810 ><
fairly sure was something else all the md / orbiters are on the internal second nic and plug and play working including the webdt366's i dumped the drives from the web admin then set them up again and issue went away. have a smaller drive with the mce install and a second 2tb for file storage must have added the core drive and picked up all the media on it in short error of dummy behind keyboard. feel free to delete this post as it is not a actual mce issue
ummm was fooling around in the webadmin and i somehow fixed it now if only i had any idea what change fixed it was all gone on a reboot best guess is when i when't under core in device tree and picked the drive as disabled. if figure it out will post what did it.
MCE 1004 been messing with wine firefox and silverlight got netflix-desktop working on the kde desktop but not sure how to get it into mce as a button anyone have any ideas? crosses fingers hopes someone didn't get this far already and find isn't Possible to get it inside mce and only runs on the desktop.
edit: if Possible under under media under the main scenario but computing will do
MCE 1004 have other files showing up in media list under media mixed in with movie lists are files like black.mpg, air quality.mpg, door.mpg, along with others from setup how do i remove them from the database only not delete them from the disk entirely? im sure its some button under my nose but im just not seeing it.