Messages

16

Installation issues / Re: Newbie -> iMON Pad and VFD

« on: July 09, 2009, 07:50:46 pm »

can someone please help.

17

Installation issues / Re: Newbie -> iMON Pad and VFD

« on: July 07, 2009, 07:06:53 pm »

i just compiled LIRC and installed it.
but i get this

Code: [Select]

dcerouter_116297:~# modprobe lirc_imon
FATAL: Error inserting lirc_imon (/lib/modules/2.6.22-14-generic/misc/lirc_imon.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dmesg says this:

Code: [Select]

dcerouter_116297:~# dmesg |grep lirc
[   19.224000] lirc_dev: IR Remote Control driver registered, major 61
[   19.404000] lirc_imon: Unknown symbol BIT_MASK
[   19.404000] lirc_imon: Unknown symbol BIT_WORD
[   19.444000] lirc_imon: Unknown symbol BIT_MASK
[   19.444000] lirc_imon: Unknown symbol BIT_WORD
[  217.176000] lirc_imon: Unknown symbol BIT_MASK
[  217.176000] lirc_imon: Unknown symbol BIT_WORD
[  449.236000] lirc_imon: Unknown symbol BIT_MASK
[  449.236000] lirc_imon: Unknown symbol BIT_WORD



18

Installation issues / Re: Newbie -> iMON Pad and VFD

« on: July 07, 2009, 03:32:56 pm »

i didn't get it working.
I have installed LinuxMCE all over so i can start from the beginning.

19

Installation issues / Re: Newbie -> iMON Pad and VFD

« on: July 02, 2009, 05:31:40 pm »

i just re-compiled LIRC (0.8.6) and when i type
ls -al /dev/ | grep lirc i get this, no lirc0 or lirc1

Code: [Select]

dcerouter_108888:/lirc# ls -al /dev/ | grep lirc
crw-r--r--  1 root   root     61,   0 2009-07-02 17:24 lirc
prw-r--r--  1 root   root           0 2009-07-02 17:24 lircd
prw-r--r--  1 root   root           0 2009-07-02 17:24 lircm


20

Installation issues / Re: Newbie -> iMON Pad and VFD

« on: July 01, 2009, 09:56:10 pm »

i own this one too

21

Installation issues / Re: Newbie -> iMON Pad and VFD

« on: July 01, 2009, 05:04:37 pm »

Well, if it is acting like a keyboard then maybe xkbevd from xkbutils package will give you more information. If it is using lirc, then lirc.org should help debug it.

its not acting like a keyboard, it acts like a mouse

ADD: i think that LIRC doesn't work.
when i type mode2 (in putty) i get this:

Code: [Select]

linuxmce@dcerouter:~$ mode2
mode2: could not get file information for /dev/lirc
mode2: default_init(): No such file or directory

if i type irw to test my remote:

Code: [Select]

linuxmce@dcerouter:~$ irw
connect: No such file or directory


22

Installation issues / Newbie -> iMON Pad and VFD

« on: June 30, 2009, 07:19:19 pm »

Hi all,

i just bought a SilverStone GD01B-MXR with an iMON Pad an built in IR/VFD.

The Pad worked out of the box like a mouse, cursor steering works, left and right clicks are working too. But if i press any other button, the remote does not work any further, so i have to restart my hybrid to get the remote working again.

I read many other topics and searched in google for my problem but i can't get it running like it should.

The VFD doesn't work at all, except the backround light. I also searched a few topics for this, but my display won't display anything 

Can someone PLEASE give me a walkthrought?
I am a totally linux newbie so a step-by-step description would be great.

*staying hopefully*

23

Installation issues / Re: SmartCard decoder Compatability

« on: June 24, 2009, 10:17:03 pm »

what about this -> http://www.bsc-bvba.be/linux/dvb/

24

Installation issues / Re: SmartCard decoder Compatability

« on: June 24, 2009, 07:26:26 pm »

would be nice to know.

I would like to build in a DVB-S or DVB-S2 card into my hybrid. But I have to use the CryptoWorks Card to watch our regional TV Channels

25

Users / Re: Ooohh...so this is what a real media center is!!!

« on: June 24, 2009, 07:14:06 pm »

I am building up and improving my hybrid. when i am finished i build a MD for my parents living room.

No more: "Give me that DVD with Mel Gibson"

26

Users / Re: Set up Standard DVD Language

« on: June 24, 2009, 04:41:47 pm »

hi. i am talking about the DVD menu language.

DVDs with a language choice at the very beginning, show the chosen menu language.
Other DVDs don't have this choice menu, they start with the default language, like you said.
But i can't change the menu language. Neither in the audio settings menu of the DVD nor with the "DVD Options" Menu on the Orbiter.
well, i can choose german on the Orbiter but the menu remains english.

On my Stand-alone-player, for example, in the set-up menu i can choose the standard language for Menus, Voice and Subtitles.
Doesn't this work on MCE too?

PS: please excuse my possibly bad english

27

Users / Set up Standard DVD Language

« on: June 23, 2009, 05:34:54 pm »

Hi all,

I am a little bit confused that no one else than me, asked a question like this. I searched but i can't find an answer.

So, how can i change the standard language for DVDs? I mean the Menu-Language and the Audio-Language.
Menus are all written in english, but i want to change this to german (works on my Stand-Alone-Player). Same with the audio-language, but this can be changed while playing easily.

can someone help me please.


cya

PS: This is my first post here, and I just wann say: THANK YOU for this great Work MCE is just fine