766
Users / Re: Strange behavior with web browsing on beta2 - big problem
« on: December 08, 2009, 11:56:47 pm »
Sure not a dieing modem?
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
767
Users / [fixed] Help with installing / controlling PLCBUS 1141E USB
« on: December 06, 2009, 10:54:21 pm »
I have some troubles with my PLCBUS 1141E USB getting to work.
I have followed the following wiki
http://wiki.linuxmce.org/index.php/Setting_Up_PLC-BUS_Template
What would also really help me is a "program" to run through Console in KDE to just test the device if it can communicate with it (if it sends commands to a child I can hear a buzz, so then I know that works).
I can choose which usb port I communicate with so that seems installed correct
/dev/ttyUSB0 (pco0000:00/0000:00:10.1+1,0)
It is hooked up to my usb port and to my knowledge I can communicate with it.
For every command I give through the menu of the page " Send command to device " I will post the log that comes up in my "follow log" screen.
I have no real childs now in my system but made a light and gave it address A1, just to test, and hear if my 1141 will make the buzz sound.
Private Method Listing
Process Idle
Process Incoming Data
Process Initialize
Process Receive Command For Child
Report Child Devices
No data in log
Reset
Send Command to Child
StatusReport
I have followed the following wiki
http://wiki.linuxmce.org/index.php/Setting_Up_PLC-BUS_Template
What would also really help me is a "program" to run through Console in KDE to just test the device if it can communicate with it (if it sends commands to a child I can hear a buzz, so then I know that works).
I can choose which usb port I communicate with so that seems installed correct
/dev/ttyUSB0 (pco0000:00/0000:00:10.1+1,0)
It is hooked up to my usb port and to my knowledge I can communicate with it.
For every command I give through the menu of the page " Send command to device " I will post the log that comes up in my "follow log" screen.
I have no real childs now in my system but made a light and gave it address A1, just to test, and hear if my 1141 will make the buzz sound.
Private Method Listing
Code: [Select]
05 12/06/09 22:31:53.932 GSD-Sleep Post 760 : 0 <0xb7840b90>
05 12/06/09 22:31:53.932 _QueueProc Post - 760 : 0 <0xb7840b90>
05 12/06/09 22:38:53.734 GSDMessageTranslator isCmdImplemented = false <0xb5effb90>
05 12/06/09 22:38:53.814 #### Pre-Process Queue = 1 <0xb5effb90>
05 12/06/09 22:38:53.814 _QueueProc Pre - 373 : 0 <0xb7840b90>
05 12/06/09 22:38:53.814 GSD-Sleep Pre 373 : 0 <0xb7840b90>
05 12/06/09 22:38:53.814 Process Queue = 1 <0xb7840b90>
01 12/06/09 22:38:53.814 For obscure reasons could not handle the message <0xb56feb90>
05 12/06/09 22:38:53.817Process Idle
Code: [Select]
05 12/06/09 22:38:53.817 GSD-Sleep Post 373 : 0 <0xb7840b90>
05 12/06/09 22:38:53.817 _QueueProc Post - 373 : 0 <0xb7840b90>
05 12/06/09 22:39:51.161 GSDMessageTranslator isCmdImplemented = true <0xb5effb90>
05 12/06/09 22:39:51.161 #### Pre-Process Queue = 1 <0xb5effb90>
05 12/06/09 22:39:51.209 _QueueProc Pre - 351 : 0 <0xb7840b90>
05 12/06/09 22:39:51.209 GSD-Sleep Pre 351 : 0 <0xb7840b90>
05 12/06/09 22:39:51.209 Process Queue = 1 <0xb7840b90>
05 12/06/09 22:39:51.209 Process Queue = 1 <0xb7840b90>
05 12/06/09 22:39:51.229 GSD-Sleep Post 351 : 0 <0xb7840b90>
05 12/06/09 22:39:51.229 _QueueProc Post - 351 : 0 <0xb7840b90>Process Incoming Data
Code: [Select]
05 12/06/09 22:40:26.465 GSDMessageTranslator isCmdImplemented = true <0xb5effb90>
05 12/06/09 22:40:26.465 #### Pre-Process Queue = 1 <0xb5effb90>
05 12/06/09 22:40:26.466 _QueueProc Pre - 350 : 0 <0xb7840b90>
05 12/06/09 22:40:26.466 GSD-Sleep Pre 350 : 0 <0xb7840b90>
05 12/06/09 22:40:26.466 Process Queue = 1 <0xb7840b90>
05 12/06/09 22:40:26.569 GSD-Sleep Post 35Process Initialize
Code: [Select]
(***)Loading Child Devices...
(***)Device:55
(***)Finished creating devices collection
(***)My Usercode:1
(***)Done.
(***)Setting up Command Queue
(***)Done.
05 12/06/09 22:41:12.014 GSD-Sleep Post 355 : 0 <0xb7840b90>
05 12/06/09 22:41:12.014 _QueueProc Post - 355 : 0 <0xb7840b90>Process Receive Command For Child
Code: [Select]
05 12/06/09 22:41:47.013 GSDMessageTranslator isCmdImplemented = false <0xb5effb90>
05 12/06/09 22:41:47.017 #### Pre-Process Queue = 1 <0xb5effb90>
05 12/06/09 22:41:47.037 _QueueProc Pre - 384 : 0 <0xb7840b90>
05 12/06/09 22:41:47.037 GSD-Sleep Pre 384 : 0 <0xb7840b90>
05 12/06/09 22:41:47.037 Process Queue = 1 <0xb7840b90>
01 12/06/09 22:41:47.056 For obscure reasons could not handle the message <0xb56feb90>
05 12/06/09 22:41:47.057 GSD-Sleep Post 384 : 0 <0xb7840b90>
05 12/06/09 22:41:47.057 _QueueProc Post - 384 : 0 <0xb7840b90>
Process ReleaseCode: [Select]
05 12/06/09 22:42:49.972 GSDMessageTranslator isCmdImplemented = false <0xb5effb90>
05 12/06/09 22:42:49.975 #### Pre-Process Queue = 1 <0xb5effb90>
05 12/06/09 22:42:49.995 _QueueProc Pre - 356 : 0 <0xb7840b90>
05 12/06/09 22:42:49.996 GSD-Sleep Pre 356 : 0 <0xb7840b90>
05 12/06/09 22:42:49.996 Process Queue = 1 <0xb7840b90>
01 12/06/09 22:42:49.996 For obscure reasons could not handle the message <0xb56feb90>Report Child Devices
No data in log
Reset
Code: [Select]
05 12/06/09 22:44:36.231 GSD-Sleep Post 776 : 0 <0xb7840b90>
05 12/06/09 22:44:36.231 _QueueProc Post - 776 : 0 <0xb7840b90>
(***)Command Queue:1, State:Complete
05 12/06/09 22:44:47.071 GSDMessageTranslator isCmdImplemented = true <0xb5effb90>
05 12/06/09 22:44:47.071 #### Pre-Process Queue = 1 <0xb5effb90>
05 12/06/09 22:44:47.090 _QueueProc Pre - 776 : 0 <0xb7840b90>
05 12/06/09 22:44:47.090 GSD-Sleep Pre 776 : 0 <0xb7840b90>
05 12/06/09 22:44:47.090 Process Queue = 1 <0xb7840b90>
05 12/06/09 22:44:47.090 Parameter: <0xb56feb90>
(***)sending Simulated PLCBUS Command
(***)IN:02 06 22 30 02 64 00 0C 03 Length:9
(***)datain: New Command:
(Command)datain: creating NEW command
(PLC)gsdCommandIn Entered:
(PLC)Value::02 06 22 30 02 64 00 0C 03 Length:9
(PLC)This Command is transmitted from an OUTSIDE SOURCE!
(***)dataOutSingleCmd Entered:
(Command)dataOut Entered:
(DEVICES)Looking up:D1
(DEVICES)In Devices:find() result:0
(PLC)I DONT KNOW THIS DEVICE ID
(Command)dataOut: Setting @state to Complete
(Command)dataOut: Returning @work
(***)got past cmd.dataOut
(***)@out is type:NilClass
(***)This command not ready to send.
05 12/06/09 22:44:47.103 GSD-Sleep Post 776 : 0 <0xb7840b90>
05 12/06/09 22:44:47.103 _QueueProc Post - 776 : 0 <0xb7840b90>
(***)Send Command to Child
Code: [Select]
(***)DCE Send Command to Child 760 Received
01 12/06/09 22:45:55.094 Error while calling method: Cannot call class method: cmd_760
error: undefined method `dcein760' for #, line: 1087
backtrace:
in: (eval): 1087
from (eval):1087:in `cmd_760'
from (eval):1087
<0xb56feb90>
01 12/06/09 22:45:55.094 For obscure reasons could not handle the message <0xb56feb90>
05 12/06/09 22:45:55.097 GSD-Sleep Post 760 : 0 <0xb7840b90>
05 12/06/09 22:45:55.097 _QueueProc Post - 760 : 0 <0xb7840b90>StatusReport
Code: [Select]
05 12/06/09 22:45:55.097 GSD-Sleep Post 760 : 0 <0xb7840b90>
05 12/06/09 22:46:31.070 GSDMessageTranslator isCmdImplemented = false <0xb5effb90>
05 12/06/09 22:46:31.073 #### Pre-Process Queue = 1 <0xb5effb90>
05 12/06/09 22:46:31.096 _QueueProc Pre - 788 : 0 <0xb7840b90>
05 12/06/09 22:46:31.096 GSD-Sleep Pre 788 : 0 <0xb7840b90>
05 12/06/09 22:46:31.096 Process Queue = 1 <0xb7840b90>
01 12/06/09 22:46:31.096 For obscure reasons could not handle the message <0xb56feb90>
05 12/06/09 22:46:31.09
768
Installation issues / Re: pluto-orbiter failed to install?
« on: December 04, 2009, 08:57:15 am »
Installing worked. To my knowledge no problems.
Trying DVD install next.
Trying DVD install next.
769
Installation issues / Re: Fresh Beta2 install failed
« on: December 04, 2009, 08:56:34 am »
I had problem with DVD, that it could not use gparted in the kubuntu installation.
Making sure this is not a problem with a wrong burn or wrongly downloaded ISO
Got net-install working.
Making sure this is not a problem with a wrong burn or wrongly downloaded ISO
Got net-install working.
770
Installation issues / Re: pluto-orbiter failed to install?
« on: December 03, 2009, 06:27:33 pm »
Not to be a wiseguy, cannot check at the moment.
But why wouldn't it be?
Just followed the wiki as I did with alpha and beta1
But why wouldn't it be?
Just followed the wiki as I did with alpha and beta1
771
Installation issues / Re: pluto-orbiter failed to install?
« on: December 03, 2009, 04:29:02 pm »
Somebody made a ticket??
Seems like a valid bug, and no quick solution avalaible.
Update1
Made a ticket
Update 2
Maybe the new net install files will work, going to give it a try
Keep you posted
http://deb.linuxmce.org/ubuntu/new-installer-beta2.tar.gz
Seems like a valid bug, and no quick solution avalaible.
Update1
Made a ticket
Update 2
Maybe the new net install files will work, going to give it a try
Keep you posted
http://deb.linuxmce.org/ubuntu/new-installer-beta2.tar.gz
772
Installation issues / Re: pluto-orbiter failed to install?
« on: December 03, 2009, 03:49:40 pm »
I have the same problem as the topicstarter
Did the net-installation 6 times now, and it get's stuck at that point.
Thought I had faulty burner or something, but seeing I am not alone, I am retrieving it from the bin.
Did the net-installation 6 times now, and it get's stuck at that point.
Thought I had faulty burner or something, but seeing I am not alone, I am retrieving it from the bin.
774
Users / Re: New Wiki Categories
« on: November 30, 2009, 02:47:19 pm »
But this is only hardware?
Maybe just a general divide......just 0710 and 0810 and future releases?
Who is the Wiki admin BTW?
Maybe just a general divide......just 0710 and 0810 and future releases?
Who is the Wiki admin BTW?
775
Developers / Re: TRAC?
« on: November 29, 2009, 05:19:58 pm »
You are right
Thanks for enlighting me
Thanks for enlighting me
776
Users / Re: LinuxMCE vs Windows 7 MCE
« on: November 29, 2009, 02:10:54 pm »
I agree with "fearingsept", but still documentation can be better, it is a weakness in my opinion.
777
Developers / Re: TRAC?
« on: November 26, 2009, 01:59:17 pm »
Could somebody change the link on the frontpage of the website, it is so sloppy to have broken links.
Thanks
Thanks
778
Users / Post your MD Boottimes
« on: November 10, 2009, 03:28:03 pm »
Just curious how fast a / your MD boots.
In virtualbox my MD netboots in 4:00 minutes from bios to usability.
I want to see if it makes difference booting from Harddisk or Net.
And 4:00 seems quite long to see my favorite show "Squarebob Spongepants".
Also has Beta / debugging code a big influence on these boottimes?
In virtualbox my MD netboots in 4:00 minutes from bios to usability.
I want to see if it makes difference booting from Harddisk or Net.
And 4:00 seems quite long to see my favorite show "Squarebob Spongepants".
Also has Beta / debugging code a big influence on these boottimes?
779
Installation issues / Initial install wizard conflict
« on: November 10, 2009, 11:12:46 am »
Upon installing there are twee wizards.
The first when where you set resolution audio etc, which is followed with the sweet little lady.
Recently when installing I select resolution, and the screen is regenerating but I see the second wizard instead of finishing the first.
After a while the first wizard kicks in and I can continue.
This happened to me with the DVD-Beta1 intallation and the net-installation.
I am using virtualbox, which didn't have this problem before.
The first when where you set resolution audio etc, which is followed with the sweet little lady.
Recently when installing I select resolution, and the screen is regenerating but I see the second wizard instead of finishing the first.
After a while the first wizard kicks in and I can continue.
This happened to me with the DVD-Beta1 intallation and the net-installation.
I am using virtualbox, which didn't have this problem before.
780
Developers / Dutch language in 1004 not in 0810?
« on: October 20, 2009, 01:12:30 pm »
Why is the ticket closed for 10.04 and is not submitted for 08.10?