Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - LmceCape

Pages: [1] 2 3 ... 5
1
Users / Re: Video playlist crashes xine on MD
« on: November 02, 2011, 06:55:51 am »
Hi

Same problem here, 810 Final.

Regards
LMCECape

2
Installation issues / Re: Airplay and HDMI Sound - 8.10
« on: October 19, 2011, 05:55:15 pm »
Please, if someone is using Airplay and HDMI, please just verify this for me.

LMCECape

3
Installation issues / Airplay and HDMI Sound - 8.10
« on: October 17, 2011, 06:59:55 pm »
Hi There

Can someone verify something for me?

After battling with a Asus EN210 1GB card I finally got it working with ALSA 1.0.24 and with  "options snd-hda-intel enable_msi=0 probe_mask=0xfff2" in the /etc/modprobe.d/nvidia-hdmi.conf.

Now if I use Airplay and disconnect it creates a "AirPlay_Audio_P <defunct>" process which locks the sound device and I can't use any sound until I kill one of the "AirPlay_Audio_P" processes.

It always creates these "AirPlay_Audio_P <defunct>" processes, but on analogue it still works.

Can anyone verify if this is just my hardware, or if it is in fact Airplay and HDMI issue?


4
Users / Re: Is anybody using the GE NX-8E for their alarm panel?
« on: June 09, 2011, 11:04:45 am »
Hi Pwned

Have you had any progress with the Caddx plugin?


Regards
LMCEcape

5
Installation issues / Back to the Basics
« on: June 07, 2011, 07:10:01 am »
Hi Guys

I was hosting a party this weekend and found out the hard way that the LMCE basics are not working.

1. Tried to play some old music videos (avi) across the house and found that when you try and use the floor plan on those files, they only play properly on the MD where you start it from, on the other MDs' it staggers. Those where some really old AVIs', but never the less would play fine on any ONE MD but badly accross multiple MDs'

2. I added a playlist with the newer AVIs' and .mpg files and the staggering was gone but the media was completely out of sink. If you then sink them it goes out of sink when the next track/video starts (music files or video files).

3. Workaround for the party was to start the playlists from the core and go to the FloorPlan and add the MDs'. Then the MDs' are in sink but the Core/Hybrid is about 3-5 sec behind. This is fine because my core is in the garage, but what if it where a hybrid?

4. What would I do if my Core was actually a just Core with no sound card or MD runnuing?, then I would not be able to start the media on the core so as to sink the MDs'

5. I was always under the impression that when you go to the FloorPlan it was always streamed from the Core, it seems that I was wrong.

6. I also booted my old core to test and it behaves exactly the same.

Is anyone else aware of this?
Is this how it has always been or am I doing something wrong?


LMCEcape 

6
Users / Re: xine-lib and video playback issues?
« on: June 01, 2011, 07:15:36 am »
will do

7
Users / Re: xine-lib and video playback issues?
« on: May 31, 2011, 06:43:01 pm »
Hi Guys

I have left the .mkv for now, trying to get normal functionality before moving to the more serious stuff.

I was hosting a party this weekend and found out the hard way that the LMCE basics are not working.

1. Tried to play some old music videos (avi) across the house and found that when you try and use the floor plan on those files, they only play properly on the MD where you start it from, on the other MDs' it staggers. Those where some really old AVIs', but never the less would play fine on any ONE MD but badly accross multiple MDs'

2. I added a playlist with the newer AVIs' and .mpg files and the staggering was gone but the media was completely out of sink. If you then sink them it goes out of sink when the next track/video starts (music files or video files).

3. Workaround for the party was to start the playlists from the core and go to the FloorPlan and add the MDs'. Then the MDs' are in sink but the Core/Hybrid is about 3-5 sec behind. This is fine because my core is in the garage, but what if it where a hybrid?

4. What would I do if my Core was actually a just Core with no sound card or MD runnuing?, then I would not be able to start the media on the core so as to sink the MDs'

5. I was always under the impression that when you go to the FloorPlan it was always streamed from the Core, it seems that I was wrong.

6. Today I booted my old core to test and it behaves exactly the same.

Is anyone else aware of this?
Is this how it has always been?

LMCEcape  ???





8
Users / Re: xine-lib and video playback issues?
« on: May 26, 2011, 05:38:51 pm »
OK here are the results

Got a test ASUS EB1501 from a friend, installed it as an MD and followed all the xine,libxine,nvidia stuff with the same results.

Installed Windows 7 on both.

Windows: The all my HD .MKV files run perfectly on both PCs', no problems.

As MDs': Both have perfect sound, if leave them on XV, the picture is much better but it runs out of CPU in about 2min. If set to VDPAU the CPU usage is low but the Video shudders horribly.

So, the hardware can play 1080P full HD MKV files under windows.

What do I try next?

9
Users / Re: xine-lib and video playback issues?
« on: May 25, 2011, 04:13:03 pm »
The only thing I can manipulate in the bios as far as graphics goes is the framebuffer and it is set to 512 (max)

Nothing I do seems to help ???


10
Users / Re: xine-lib and video playback issues?
« on: May 25, 2011, 07:55:00 am »
Hi Joerod

Mine never starts fine it always studders, since I installed libxine2 and Nvidia-260.19.36 the CPU is fine.

 I don't know what else to try.

These boards are supposed to be able to run 1080p HD content.

LMCEcape


11
Users / Re: xine-lib and video playback issues?
« on: May 24, 2011, 07:15:24 pm »
Hi There

I have followed all the steps mentioned to fix .mkv files, but it has not helped, when I play a .mkv file it is just stuttering, the Nvidia drivers and Libxine2 fixed the 100% CPU but the video is still terrible, is there anything else that I can try?

NVIDIA-Linux-x86-260.19.36.run - Done
libxine2 - Done
pluto-xine-player - was already a later version
VDPAU - Done

MD = Zotac ION ATOM 330



Regards
LMCEcape

12
Installation issues / Re: LMCE 10.04 - Latest Update
« on: April 28, 2011, 01:57:06 pm »
I have done that, had a lot of updates but still the same errors.


13
Installation issues / Re: LMCE 10.04 - Latest Update
« on: April 28, 2011, 11:03:55 am »
Hi Thom

The Media_Plugin.so file from your site still has the same error, as well as a few other files, here is the list of files and errors:

Media_Plugin.so: undefined symbol: _ZN12nsJobHandler7MoveJob18ReportPendingTasksEPN3DCE15PendingTaskListE
Xine_Plugin.so: undefined symbol:   _ZN3DCE16MediaHandlerBase16GetRenderDevicesEPNS_13EntertainAreaEPSt3mapIiPNS_11MediaDeviceESt4lessIiESaISt4pairIKiS5_EEE
Picture_Plugin.so: undefined symbol: _ZN3DCE16MediaHandlerBase16GetRenderDevicesEPNS_13EntertainAreaEPSt3mapIiPNS_11MediaDeviceESt4lessIiESaISt4pairIKiS5_EEE
MythTV_PlugIn.so: undefined symbol:  _ZN3DCE16MediaHandlerBase16GetRenderDevicesEPNS_13EntertainAreaEPSt3mapIiPNS_11MediaDeviceESt4lessIiESaISt4pairIKiS5_EEE

You must be quit busy with this, I will just keep checking the updates daily.

Regards
LMCECape




14
Installation issues / Re: LMCE 10.04 - Latest Update
« on: April 26, 2011, 09:52:40 pm »
Thanks, much appreciated.

Lmcecape

15
Installation issues / Re: LMCE 10.04 - Latest Update
« on: April 26, 2011, 07:51:31 pm »
Great thanks for the reply, thought I would have to go back to 810.

Anything else you want me to test, just drop me mail. I would like to help to get 1004 fully functional ASAP.

Lmcecape


Pages: [1] 2 3 ... 5