Messages

211

Users / Re: squeezebox

« on: June 28, 2009, 07:40:00 am »

Update, if I go to "http://localhost:9000" I get the SqueezeCenter, from there I can play music on both devices (Boom & Receiver) but if I play a song on the MD, and go to the FloorPlan and select the squeezbox no audio output
In the past I don't remember I did anything special to do that !!!!

So it looks like SqueezCenter sees my devices but not LMCE !!!

Any Ideas on how to register SqueezeBoxes with 810 LMCE ??

212

Users / Re: squeezebox

« on: June 28, 2009, 01:07:52 am »

Luke,

I just noticed that SqueezeCenter is using my external IP address of the Hybrid, and not the internal, also if I go to (Advanced/Configuration/SLIM Server) it says Loading SqueezeCenter but nothing happened !! How do you set SqueezeCenter IP to 192.168.80.1 Because both players set for 192.168.80.1 SqueezeCenter server.

Thanks.

213

Users / Re: squeezebox

« on: June 28, 2009, 12:16:17 am »

Luke,

I have disabled my firewall , not sure about

Verify that the cli port is setted to 9090 in the web configuration

Here's my Squeezecenter setup

Code: [Select]

     
SqueezeCenter StatusVersion: 7.3.3 - 27044 @ Mon Jun 15 15:12:32 PDT 2009

Hostname: dcerouter

IP: 192.168.0.34

HTTP Port: 9000

OS: Debian - EN - utf8

Platform: i686-linux

Perl Version: 5.10.0 - i486-linux-gnu-thread-multi

MySQL Version: 5.0.67-0ubuntu6

Total Players Recognized: 1

 
Library StatisticsTotal Tracks: 0

Total Albums: 0

Total Artists: 0

Total Genres: 0

Total Playing Time: 0:00:00

 
Music Scan DetailsPlaylist Scan   (  of  )   Complete  00:00:00


Database Cleanup #1   (0  of  0)   Complete  00:00:00


Database Cleanup #2   (  of  )   Complete  00:00:00


Database Optimize   (  of  )   Complete  00:00:00


   (  of  )     


   (  of  )     


   (  of  )     


   (  of  )     


   (  of  )     


   (  of  )     


   (  of  )     


SqueezeCenter has finished scanning your music collection.
Total Time: 00:00:00 (Saturday, June 27, 2009 / 3:05 PM)
 
Player InformationInformation on all identified devices connected to SqueezeCenter
 
Squeezebox-booomPlayer Model: boom

Firmware: 47

Player IP Address: 192.168.80.135

Player MAC Address: 00:04:20:1e:ee:ff

 
Folders
Cache Folder/var/lib/squeezecenter/cache
Preferences Folder/var/lib/squeezecenter/prefs
Plugin Folders/var/lib/squeezecenter/cache/InstalledPlugins/Plugins, /usr/sbin/Plugins, /usr/share/squeezecenter/Plugins
SqueezeCenter Log FileSqueezeCenter keeps a log file for all application related activities (Audio Streaming, Infrared, etc) here:
/var/log/squeezecenter/server.log (100, 500, 1000 lines)
 
Scanner Log FileSqueezeCenter keeps a log file for all scanning related activities, including iTunes & MusicIP here:
/var/log/squeezecenter/scanner.log (100, 500, 1000 lines)
 
 


214

Users / Re: squeezebox

« on: June 27, 2009, 11:16:29 pm »

Did anyone experience problem with the Squeezebox in 810 Alpha 2.23??

 I had both boxes (SqueezeBox Receiver &SqueezeBox Boom)  working in the earlier version of 810 now I reinstalled 810, and got both detected and assigned an IP but no sounds output from them.

Both  SqueezeBox player's info shows not registered and Status =” **RUN_CONFIG** !!

here’s what I got from the Slim Server Streamer log of

Code: [Select]

/var/log/pluto/59_Slim_Server_Streamer.log

========== NEW LOG SECTION ==========
1 06/27/09 13:41:34 59 (spawning-device) Starting... 1
1 06/27/09 13:41:34 59 (spawning-device) Found /usr/pluto/bin/Slim_Server_Streamer
05 06/27/09 13:41:34.695 Trying to connect to SlimServer at address: 127.0.0.1:9090 <0xb7a7c6c0>
05 06/27/09 13:41:34.696 Creating child 61 <0xb7a7c6c0>
05 06/27/09 13:41:34.696 Creating child 62 <0xb7a7c6c0>
== ATTEMPT FRESH START ==
1 06/27/09 13:41:52 /usr/pluto/bin/Spawn_Device.sh 59 (spawning-device) 17791 Dev: 59; Already Running list: 15,18,19,27,28,29,30,44,16,59,
1 06/27/09 13:41:52 /usr/pluto/bin/Spawn_Device.sh 59 (spawning-device) 17791 Device 59 was marked as 'running'. Not starting
1 06/27/09 13:41:52 /usr/pluto/bin/Spawn_Device.sh 59 (spawning-device) 17791 Dev: 59; Exiting because not starting

Thanks
Charlie,

215

Installation issues / Re: ASterisk reinstall?

« on: June 27, 2009, 07:47:27 am »

Quick update, reinstalling 810 on a new HD, got all my devices back in action.
I had to do this, because updating every week for the last few months my system became unstable for some reason.

Charlie,

216

Users / Re: I detected a new plug and play device - No, ignore it this time - HOWTO pick up?

« on: June 27, 2009, 04:58:40 am »

Colin,
I definitely think there is a problem with the unlock feature "pluto-admin > advanced > Configuration > Unknown devices " if I understand it correctly, after unlocking the device or shared folder, reloading the router, and re-powering the device the system should ask you if you want to use the device or shared folder again, where in my case everytime I re-powered my DNS-323 new entry of each shared folder get created in the PnpQueue table I had 3 shares on my NAS, so when I searched the Queue table there was about 12 entries, again I think someone who knows this part should verify the functionality of the unlock feature, because it is useful for people who want to unblock certain shared folder on the NAS at later time!!!

217

Users / Re: I detected a new plug and play device - No, ignore it this time - HOWTO pick up?

« on: June 26, 2009, 06:37:41 am »

Here's a solution in case you made a mistake and ignored a Plug n Play device and you selected "No, and ignore every time. Don't ask again for this device." , or the Unlock command did not work for you, and that what happened to me.

1) Turn off the device first, in my case was DNS-323
2) Log in to the Mysql database "sudo mysql -uroot"
3) Select the table from the database "use pluto_main"
4) View all the devices in the queue, and locate the IP address of the device in question "SELECT * FROM PnpQueue;"
5) View all rows of the device to be sure, you should see at lease 3 rows "SELECT * FROM PnpQueue where IPaddress=’192.168.80.130’;"
6) Delete all rows related to the above IP address " DELETE FROM PnpQueue WHERE IPaddress=’192.168.80.130’;"
7) Quit Mysql "quit"
Reload the router
9) Turn ON the device
10) Now Linuxmce will detect the device automatically "PnP"
11) Done 

Cheers,
Charlie
 

218

Users / Re: WAYNE-DALTON Z-WAVE® THERMOSTAT

« on: June 25, 2009, 07:13:51 am »

Hari,

I just installed 810 on a new HD, I'm using “Mi Casa Verde“ USB Dungle, I  have connected 3 Zwave devices, light switch, motion detector, and WaynDalton http://www.homecontrols.com/cgi-bin/main/co_disp/displ/prrfnbr/12155/sesent/00/Wayne-Dalton-Z-Wave-Thermostat

All devices work as expected except the Thermostat as you know, only commands that work are "Heat" & "Cool"
I attached my DCERouter.log, FYI.
Please let me know if there anything I can do to help you out.

Cheers,
Charlie

219

Users / Re: I detected a new plug and play device - No, ignore it this time - HOWTO pick up?

« on: June 24, 2009, 08:42:22 am »

I just rebuilt my 810 Hybrid, by mistake I clicked "No, and ignore every time. Don't ask again for this device." for my Dlink "DNS-323".

So I went to "pluto-admin > advanced > Configuration > Unknown devices " and I unlocked the device and rebooted my hybrid, no luck to redetect it again, then I followed the instruction in the wiki http://wiki.linuxmce.org/index.php/Re-Detecting_Plug_and_Play_Devices I saw there is 3 records in the "PnpQueue" Table,  because I see the same Mac address of the DNS323 3 times if I understand the table correctly it should have only one Mac address per record!!!

So, I'm not sure what is the best way to delete these records, so it will get detected again next reload !!! Or I just install the device manually??

Thanks,
Charlie

220

Installation issues / Re: ASterisk reinstall?

« on: June 20, 2009, 08:56:58 pm »

I updated my system last night to the latest 810 release, 2.23, Asterisk was already installed and working fine both incoming and outgoing calls, then I added insteon, Zwave and HDMomerun after that Asterisk stopped working and I get the above error:

Connecting to Asterisk manager interface..FAILED
[FATAL] Asterisk Manager Connection Failure Failed to connect to the Asterisk manager through port: 5038

I would appreciate any suggestion!!

221

Users / Re: Insteon not working - Need some ruby guidance

« on: May 25, 2009, 12:24:19 am »

I Just want to give an update on my status with Insteon setup, the 7.10 with direct serial port to the hybrid worked without any problem first try, my LMCE 810 Alpha 2.21 with USB2Serial adapter, now is working, with the following modifications:
1) changing default value of "#37 COM port on PC" to "/dev/ttyUSB0"
2) select "pci0000:00/0000:00:02.0+5" from the drop down list of the device data COM Port on PC
3) Created 88_InsteonPLM.sh (for Plug n Play) per Wiki instructions

I attached the data exchanged between LMCE with PLM module if someone interested.

222

Users / Re: Insteon not working - Need some ruby guidance

« on: May 22, 2009, 06:32:15 am »

This is the same code in the wiki page, without the extra HTML characters when you use copy and paste.

BTW, I just updated my 810 to Alpha 2.21, now I see commands exchange between the host(USB2Serial adapter) and the PLM, but LMCE can not detect the "OutletLinc" light for some reason, I need to do some comparison with my 710 setup, which is working perfect.

223

Users / Re: Insteon not working - Need some ruby guidance

« on: May 21, 2009, 08:53:34 pm »

Seth,
I attached the Ruby code I used in my 710 Insteon PLM setup for your reference.

224

Users / Re: Insteon not working - Need some ruby guidance

« on: May 21, 2009, 05:31:13 am »

No, still an open issue for me.
Do you have similar issue??

225

Installation issues / Re: [COMPLETE] Ademco/Honeywell entire Vista series via VistaICM

« on: May 19, 2009, 06:55:13 am »

I was hopping to get the Vista panel working so I can use it as a reference to make the Elk M1 working, because the basics are almost identical.
Charlie,