Messages

16

Users / Re: MD's are slow to boot after update to 8.10

« on: July 24, 2010, 07:37:13 am »

I mentioned this back in May http://forum.linuxmce.org/index.php?topic=10052.msg68806#msg68806
Now with snapshot "23165", I removed username/password from my NAS and made it access to all, the MD boots in 5 minutes where before (with user/pass) I had to shut down the NAS and boot all the MDs then power the NAS.

17

Users / Re: MythTV setup on 23165 snapshot

« on: July 23, 2010, 08:42:15 pm »

purps,
you are right you can do this from KDE, but for new commers they will have issues because the Wiki's instructions tells them to go to Computing section and run the MythTV setup, that's why I put the shortcut keys.

18

Users / Re: Anyone Have Insteon Working in 810 yet??

« on: July 23, 2010, 08:26:14 pm »

I'm using the following modules now:
http://www.insteon.net/2413S-powerlinc-dual-band.html
http://www.insteon.net/2473SWH-outletlinc.html

19

Users / Re: MythTV setup on 23165 snapshot

« on: July 23, 2010, 07:34:45 am »

The corners setup correctly, I used Alt-N, Alt-F, & Tab to configure MythTV

20

Users / Re: Energy monitor

« on: July 23, 2010, 06:46:02 am »

Thanks Tim, I thought this would be perfect addition to LMCE zWave product line !!!

21

Users / Energy monitor

« on: July 23, 2010, 05:13:55 am »

Did anyone use this product before
http://www.aeon-labs.com/site/products/view/4/

22

Users / Re: MythTV setup on 23165 snapshot

« on: July 23, 2010, 04:18:57 am »

If I remember correctly, there was nothing hiding the buttons.

23

Users / MythTV setup on 23165 snapshot

« on: July 23, 2010, 01:01:10 am »

I'm trying to configure my MythTV using my keyboard in (Computing menu) on my 1280x1024 19" monitor Core, the Close/On-Off/ buttons hide the buttons of MythTV (Back,Next,..)!!!

24

Users / Re: Anyone Have Insteon Working in 810 yet??

« on: July 22, 2010, 09:53:05 pm »

Thanks Thom & Zaerc, for explaining my mistake.
It is now working as it used to be, just by deleting the device and adding it again, I think because the first time I created the PnP script after I added the Template.

FYI, I noticed there is errors in the log

Code: [Select]

01 07/22/10 12:39:17.263 Connect failed Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) <0xb582db90>01 07/22/10 12:39:17.263 Query failed (MySQL server has gone away): SELECT IR_PowerDelay FROM DeviceTemplate_AV WHERE FK_DeviceTemplate='37' (1) <0xb582db90>01 07/22/10 12:39:17.263 Connect failed Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) <0xb582db90>01 07/22/10 12:39:17.263 Connect failed Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) <0xb582db90>01 07/22/10 12:39:17.264 Query failed (MySQL server has gone away): SELECT IR_PowerDelay FROM DeviceTemplate_AV WHERE FK_DeviceTemplate='37' (1) <0xb582db90>01 07/22/10 12:39:17.264 Connect failed Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) <0xb582db90>01 07/22/10 12:39:17.264 Connect failed Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) <0xb582db90>01 07/22/10 12:39:17.264 Query failed (MySQL server has gone away): SELECT IR_PowerDelay FROM DeviceTemplate_AV WHERE FK_DeviceTemplate='37' (1) <0xb582db90>


25

Users / Re: Anyone Have Insteon Working in 810 yet??

« on: July 22, 2010, 08:58:12 pm »

Ok, Here's the error from the Insteon Log

Code: [Select]

2603:(***):MY DEVICE:34(***):SndIns:Queue:101 07/21/10 18:25:51.153
Error while calling method: Cannot call class method: cmd_355error: undefined local variable or method `conn_' for #, line: 1614backtrace:
in: (eval): 1614 from (eval):1614:in `SndIns' from (eval):308:in `cmd_355' <0xb4eb4b90>(***):receive timeout=1(***):receive timeout=2(***):receive timeout=3(***):
Command Stalled!  resetting and retrying(***):Current Command:0(***):SndIns:Queue:101 07/21/10 18:26:01.091 Error while calling method: Cannot call class method: cmd_351error:
undefined local variable or method `conn_' for #, line: 1614backtrace: in: (eval): 1614 from (eval):1614:in `SndIns' from (eval):73:in `cmd_351' from (eval):1614 <0xb4eb4b90>(***):
receive timeout=1(***):receive timeout=2(***):receive timeout=3(***):Command Stalled!  resetting and retrying(***):
Current Command:0(***):SndIns:Queue:101 07/21/10 18:26:09.119 Error while calling method: Cannot call class method: cmd_351error:
undefined local variable or method `conn_' for #, line: 1614backtrace: in: (eval): 1614
from (eval):1614:in `SndIns' from (eval):73:in `cmd_351' from (eval):1614 <0xb4eb4b90>(***):receive timeout=1(***):receive timeout=2(***):receive timeout=3(***):
Third attempt, Failing Command!(***):Command Completed.(***):Queue Empty.(***):RERUN Not needed(***):Reporting Child Devices(***):05 07/21/10 18:26:45.869
Got a reload command from 0  <0xb56ffb90>05 07/21/10 18:26:46.175 void ClientSocket::Disconnect()
on this socket: 0x83d35f8 (m_Socket: 8) <0xb70078d0>Return code: 2


26

Users / Re: Anyone Have Insteon Working in 810 yet??

« on: July 22, 2010, 08:35:59 pm »

I see I can not run the script from the command line , because there is no parameters right ?? so why the script is not running automatically

I just sent a command to the serial port COM-0 and it is OK why the script is not OK

Code: [Select]

linuxmce@dcerouter:~$ /usr/pluto/bin/TestSerialPort -p /dev/ttyS0 -P N81 -b 9600 -t "\r\s500m\rPO\r"                                                                                                                                        
\f0\f0
linuxmce@dcerouter:~$

Running the script

Code: [Select]

linuxmce@dcerouter:/usr/pluto/pnp$ sudo ./88_InsteonPLM.sh
[sudo] password for linuxmce:
Insteon Powerline Modem Detection Script queue
Unknown: N81
TestSerialPort, v.2.0.0.44.10071723165
Usage: TestSerialPort [-p port] [-P N81|E81|O81] [-t transmit string]
[-s Search String] [-m message to log] [-i Timeout] [-b baud] [-h]
strings can include: \xx (xx is a hex char), \r and \n, and to delay x ms, \sxm
\b means send a break
-M puts it in monitor mode where it just reports the state
  of hardware flow control until ctrl+c is pressed
It's not an Insteon Powerline Modem
RESP: UNHANDLED
linuxmce@dcerouter:/usr/pluto/pnp$



27

Users / Re: Anyone Have Insteon Working in 810 yet??

« on: July 22, 2010, 08:21:09 pm »

Thom,
I understand that, you're aboslutly right, the first time I run the script for the shell prompt manually and I got that error complaining about N81 (no parity 8 bits, 1 stop), then I pasted to see if the TestSerialPort syntax is wrong.

I'm doing more tests as we speack, and I will let you know the results BTW, I noticed there is 2 templates for Insteon one is "Inseton PLM" the other "Insteon PLM DCE",  I selected "Insteon PLM" because I used it in the past

28

Users / Re: Anyone Have Insteon Working in 810 yet??

« on: July 22, 2010, 08:03:49 pm »

I'm not arquing with anyone, I'm just trying to find the problem with my Insteon setup

29

Users / Re: Anyone Have Insteon Working in 810 yet??

« on: July 22, 2010, 07:57:31 pm »

I didn't create the script it is from here http://wiki.linuxmce.org/index.php/Setting_Up_PLM_Template I've been using this from day one.

30

Users / Re: Anyone Have Insteon Working in 810 yet??

« on: July 22, 2010, 04:56:25 pm »

Zaerc,

This line from the PnP script (88_InseteonPLM.sh) for the Insteon, it was not running automatically by LMCE so I run the script from the shell prompt and got that error, then I typed the command by itself to verify it !!!

Code: [Select]

#!/bin/bash

echo "Insteon Powerline Modem Detection Script queue $2"
/usr/pluto/bin/TestSerialPort -p $3 -P N81 -b 19200 -t "\02\60"  -i 1 -s "\03\05"
if [[ "$?" -ne 0 ]]; then
echo "It's not an Insteon Powerline Modem"
/usr/pluto/bin/MessageSend dcerouter -r 0 $1 1 806 224 $2 13 "$4" 44 0
else
echo "It is an Insteon Powerline Modem"
/usr/pluto/bin/MessageSend dcerouter -r 0 $1 1 806 224 $2 13 "$4" 44 1932
fi