Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - canukguy1974

Pages: 1 [2] 3
16
Installation issues / Re: Orbiter cannot register with router.
« on: April 20, 2010, 03:30:46 pm »
 What can I install that will work then if noone has an answer

17
Installation issues / Re: Orbiter cannot register with router.
« on: April 18, 2010, 04:14:11 pm »
 I am still stuck at this spot with error message "Orbiter cannot register with router" I changed the router I have tried everything I can think of. I tried a different hard drive with new install. I unchecked asterisk and tried with it. I get the same error with the windows orbiter as well. Here is a portion of the log, this is all that is in the log just tons of them.

Code: [Select]
/var/log/pluto/21_LaunchOrbiter.sh.log1 04/17/10 19:15:39 21 (spawning-device) Starting... 50
1 04/17/10 19:15:39 21 (spawning-device) Found /usr/pluto/bin/LaunchOrbiter.sh
05 04/17/10 19:15:39.498 Replacement SDL window created! <0xb48ffb90>
05 04/17/10 19:15:39.585 will overwrite wm window id // void X11wrapper::Assign_WmWindow(Window) <0xb48ffb90>
05 04/17/10 19:15:39.589 Using masked UI? NO <0xb48ffb90>
01 04/17/10 19:15:39.890 Cannot register with router <0xb52316d0>
Return code: 1
3 04/17/10 19:15:50 21 (spawning-device) Device died... count=50/50 dev=21
Sat Apr 17 19:15:50 EDT 2010 died
3 04/17/10 19:16:00 21 (spawning-device) Aborting restart of device 21...


please help!

18
Installation issues / Re: Orbiter cannot register with router.
« on: April 08, 2010, 07:45:21 pm »
 I set it up with 2 nic's but, same problem. I have eth0 is my public IP and eth1 is network IP (192.168.80.1). I finally got the web admin working. I turned off asterisk as suggested in another post, still same result. I selected Opengl in webadmin to install latest nvidia drivers. I tried to look at the log but, I don't see what the problem is.

19
Installation issues / Orbiter cannot register with router.
« on: April 07, 2010, 04:15:23 pm »
 I have installed this about 5 times since Thursday, I have tried different versions, different hardware but still end up with the same result. I have read a couple places where it says to disable asterisk in web admin. But, I can't access web admin either. The install goes okay. I am only using one nic at the time. I have used it like this in the past without issue. I physically have 2 nic's but I didn't want to rewire my home network as this system is for someone else. If anyone has any idea's please respond. Thank you

20
Installation issues / Re: Resolved - This orbiter will be closed message.
« on: September 11, 2009, 12:50:56 am »
 I have the same problem. Is there away that we can revert the upgrade. I don't see how reinstalling it is away to resolve the issue. We need to find out why the handful of us have this issue and others don't. I deleted all the orbiters from web admin except Orbiter #20 the onscreen and I still get the same thing. When I check processes I notice that LaunchOrbiter.sh is listed like 10 times. I am still new to linuxmce so I am still guessing. I really don't want to re-install the whole system again. I have alot of media on this. When I do a re-install can I save my /home folder so I don't lose all my media and settings?

EDIT*******
this is the log for 20_LaunchOrbiter.sh.log
Code: [Select]
== ATTEMPT FRESH START ==
1 09/07/09 22:52:10 /usr/pluto/bin/Spawn_Device.sh 20 (spawning-device) 27482 Dev: 20; Already Running list: 21,25,22,30,24,15,16,17,18,27,28,
== FRESH START ==
1 09/07/09 22:52:10 /usr/pluto/bin/Spawn_Device.sh 20 (spawning-device) device: 20 ip: localhost cmd_line: LaunchOrbiter.sh
0 09/07/09 22:52:10 20 (spawning-device) Entering 20
========== NEW LOG SECTION ==========
1 09/07/09 22:52:10 20 (spawning-device) Starting... 1
1 09/07/09 22:52:10 20 (spawning-device) Found /usr/pluto/bin/LaunchOrbiter.sh
05 09/07/09 22:52:11.007 Replacement SDL window created! <0xb5939b90>
05 09/07/09 22:52:11.168 will overwrite wm window id // void X11wrapper::Assign_WmWindow(Window) <0xb5939b90>
05 09/07/09 22:52:11.174 Using masked UI? NO <0xb5939b90>
05 09/07/09 22:52:11.434 Creating child 21 <0xb613b6e0>
05 09/07/09 22:52:11.445 Creating child 22 <0xb613b6e0>
05 09/07/09 22:52:11.458 Creating child 24 <0xb613b6e0>
05 09/07/09 22:52:11.471 Creating child 25 <0xb613b6e0>
05 09/07/09 22:52:11.494 Creating child 30 <0xb613b6e0>
05 09/07/09 22:52:11.824 VisibilityNotify! <0xb613b6e0>
05 09/07/09 22:52:11.824 EnterNotify! <0xb613b6e0>
05 09/07/09 22:52:11.824 FocusIn! <0xb613b6e0>
05 09/07/09 22:52:11.824 VisibilityNotify! <0xb613b6e0>
05 09/07/09 22:52:11.824 VisibilityNotify! <0xb613b6e0>
05 09/07/09 22:52:11.824 LeaveNotify! <0xb613b6e0>
05 09/07/09 22:52:11.825 FocusOut! <0xb613b6e0>
05 09/07/09 22:52:11.825 EnterNotify! <0xb613b6e0>
05 09/07/09 22:52:11.825 FocusIn! <0xb613b6e0>
05 09/07/09 22:52:13.187 error_code==1 => ErrorText=='BadRequest (invalid request code or no such operation)' // bool X11wrapper::Mouse_Grab(Window, Window) <0xb62da6e0>
05 09/07/09 22:52:13.188 error_code==1 => ErrorText=='BadRequest (invalid request code or no such operation)' // bool X11wrapper::Keyboard_Grab(Window) <0xb62da6e0>
05 09/07/09 22:52:13.190 VisibilityNotify! <0xb62da6e0>
05 09/07/09 22:52:13.190 EnterNotify! <0xb62da6e0>
05 09/07/09 22:52:13.309 FocusIn! <0xb62da6e0>
05 09/07/09 22:52:13.309 VisibilityNotify! <0xb62da6e0>
05 09/07/09 22:52:13.309 VisibilityNotify! <0xb62da6e0>
05 09/07/09 22:52:13.309 FocusOut! <0xb62da6e0>
05 09/07/09 22:52:13.309 LeaveNotify! <0xb62da6e0>
05 09/07/09 22:52:13.309 EnterNotify! <0xb62da6e0>
05 09/07/09 22:52:13.309 LeaveNotify! <0xb62da6e0>
05 09/07/09 22:52:13.310 VisibilityNotify! <0xb62da6e0>
05 09/07/09 22:52:13.310 EnterNotify! <0xb62da6e0>
05 09/07/09 22:52:13.310 FocusIn! <0xb62da6e0>
05 09/07/09 22:52:13.310 LeaveNotify! <0xb62da6e0>
05 09/07/09 22:52:13.310 FocusOut! <0xb62da6e0>
05 09/07/09 22:52:13.310 FocusOut! <0xb62da6e0>
05 09/07/09 22:52:13.310 FocusIn! <0xb62da6e0>
05 09/07/09 22:52:13.591 FocusOut! <0xb62da6e0>
05 09/07/09 22:52:22.271 FocusIn! <0xb62da6e0>
05 09/07/09 22:52:22.435 FocusOut! <0xb62da6e0>
05 09/07/09 22:52:22.563 Orbiter quiting... <0xb45e8b90>
05 09/07/09 22:52:22.564 Got an on quit.  Pushing an event into SDL <0xb45e8b90>
05 09/07/09 22:52:22.583 XRecordExtensionHandler::recordingThreadMainFunction(): pDisplay_ControlConnection=163633600, pDisplay_DataConnection=-1307217360 ->Closing <0xb0ffdb90>
05 09/07/09 22:52:22.583 XRecordExtensionHandler::recordingThreadMainFunction(): pDisplay_ControlConnection=163633600, pDisplay_DataConnection=-1307217360 ->Closed <0xb0ffdb90>
05 09/07/09 22:52:22.659 LeaveNotify! <0xb613b6e0>
05 09/07/09 22:52:22.659 FocusOut! <0xb613b6e0>
05 09/07/09 22:52:26.795 void ClientSocket::Disconnect() on this socket: 0x9823f00 (m_Socket: 16) <0xb62da6e0>
Return code: 0
2 09/07/09 22:52:26 20 (spawning-device) Shutting down... count=1/50 dev=20
Mon Sep  7 22:52:26 EDT 2009 Shutdown
/code]

21
Users / Re: Customizing Media layout !!!
« on: September 05, 2009, 04:01:58 pm »
 Sorry I haven't replied right away but, I have been messing with AutoHotkey to try and make a macro to help me out a bit. I do have alot of movies and songs (500movies and 4000songs) close to that anyways.  I have been editing the synopsis and updating media.

 Is there a way that I can clear the database from old attributes especially in songs. I have used easytag to do all me songs on my windoze box. I deleted what I had on my Linux  system but, when I use the media brower and select an attribute they are still listed in the database. I would like to import my songs on a clean database?

Another question can we use each others id3 tags?

22
Users / Customizing Media layout !!!
« on: September 03, 2009, 09:23:48 pm »
 I would like to know if there is a way to turn off the file info in the video section. Just for appearance. What I am talking about is the info over top of the play close move delete buttons when I click on a video. I have been going through it all over due to the fact that 1. if your synopsis is longer than 3 lines you can't read the rest of it. It would be nice if it would auto scroll but, anyways. So if I could hide the location of the file then it would look at little cleaner. I hope this makes sense.

23
Users / Help with hardware! Russound Cam6.6
« on: September 03, 2009, 05:21:53 pm »
 Hi, I have been building this system for months now and its going pretty good but now I am at a stand still. I have a russound cam6.6 with Yamaha RX V2500. They both have RS-232. When I run the wizard it detects the yamaha (kind of) it adds zone 2 and 3 but, its still telling me that it hadn't detected anything. I know the model that is on the hardware wiki is the Yamaha RX V1000 so I was figuring that I could edit the template a bit and be set. I guess I am hoping that someone reads this and has a similar set up that we can run ideas across. I know it recomends sqeeze boxes but when I was reading it said that LinuxMCE could basically control any RS-232 device and the receiver is just the updated model. If anyone has any ideas or suggestions please spend the minute and reply to this post. I need your help guys. Its a beautiful system I am just getting to the end now and would like to finish this off and contribute my notes to the wiki.

24
Users / Playing .avi files with mythtv?
« on: September 03, 2009, 05:05:16 pm »
 I have installed 0810 alpha 2 but, when I play my stored video files some play okay and some are just bad. They have noticeable tearing and some look like they are cut and pasted on a diagonal and reinserted in the wrong order bottom on the top and vice versa. I have a asus M3N78 Pro with onboard Integrated NVIDIA GeForce 8 Series GPU(8300 chipset). Is there a way that I can fix this or should I somehow change it to use mythtv to play my .avi files.

25
Users / Question: How to upgrade nvidia drivers after 0810 install
« on: August 29, 2009, 01:17:31 pm »
 I currently am running 0810 and recently upgraded to alpha2. I have nvidia version 180.11  and I need to upgrade to 180.60 and alsa 1.20. I am having a hard time trying to shutdown linuxmce on the core/md (I think thats what its called) I have only 1 pc. I issue command in terminal in KDE Desktop "telinit 1" (I have tried all of them but 0 and 6) I get a garbled screen and no network so I can't even ssh into the box. I need to shutdown the program so I can run the nvidia installer.


26
Users / Someone recommend an alarm to use?
« on: April 25, 2009, 03:48:55 pm »
 I have been trying to set a few boxes up now for the better part of 4 months now (ya I got sucked in by the video) now I am stuck with this, I can't get anyone to change their minds and go with something else. Not that I don't like LinuxMCE it stills has a long way to go yet. The metadata issue has really set me back trying to tag thousands of songs and movies has been a really chore at the least.
 
 Now I need to find an alarm panel to use that is not going to take forever to set this up. I have a amd phenom 9500 quad core 4 gigs of corsair 800 mhz anyways that isn't really relevant but, I have a webpad dt366 and an itouch and iphone . I still need to find a way to set up a 6 zone audio system as well and so far the only thing I found is a russound cam/cav box that is almost $3000 if anyones knows anything better let me know. Don't get me wrong I do like the system, I am getting down to crunch time and need to get these finished.

27
Users / Re: iPhone/iPod Touch Orbiter?
« on: April 23, 2009, 05:09:16 pm »
 I would pay up to $40 since a Web pad 366 is already $150 on a good day.

28
Users / Import metadata from 1 Linuxmce to another
« on: April 21, 2009, 02:43:58 am »
 Is there a way that I can save my metadata from one linuxmce box to a new one or better yet can we all upload our (users) own metadata to a web storage. There has got to be a way to share this workload or import it. I know others have got the IMDB hack to work but, I can't get it to work it looks like it installs but, I can't figure out how to use it or where the added function to the web admin is. Any takers?

29
 I am having sound issues as well. I get it play in the AV Wizard and when I rebooted its all gone again, I have done a reinstall 3 x today but, I have been keeping the /home directory (700 gigs worth of media) I don't want to transfer back to drive ( I have a backup ) I know that it is my home folder just trying one more time before I do a clean install. Anyways good luck, and good job updating your thread if we all did as good a job we would have great support archives.

30
Users / Re: Cover Art
« on: March 31, 2009, 09:19:45 pm »
 Thanks. I renamed all my avi's to just movie title no dates or such. It seems to be working but, I also patched MCE to use IMDB instead of just amazon. As for the mp3's I need to find a program that will remove all the numbered prefixes ex. 001.Metallica-Ride.The.Lightning.mp3 I have 1000 of those.any takers of how I can remove the #'s.

Pages: 1 [2] 3