Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - itsmeok

Pages: 1 [2] 3 4 ... 7
16
Installation issues / Installing games (MAME) through wiki fails on linuxmce 7.10 RC2
« on: February 16, 2009, 03:06:29 pm »
I am trying to follow the wiki to install the games. In the plugin instructions I get stuck:

Here is what I do and the messages I got. Basically the file that I try to copy in the last command is not there.

 linuxmce@dcerouter:~/trunk/src/lmce_game$ cd ../MAME_PlugIn
 linuxmce@dcerouter:~/trunk/src/MAME_PlugIn$ make so
 Computing dependencies for MAMEMediaStream.cpp done
 Computing dependencies for MAMEROM.cpp done
 Computing dependencies for ../Gen_Devices/MAME_PlugInBase.cpp done
 Computing dependencies for MAME_PlugIn.cpp done
 Computing dependencies for Main.cpp done
 g++ -c -I.. -I../DCE -I/usr/include/mysql -DKDE_LMCE -DDEBUG -DTHREAD_LOG -DLOG_                                                                                              ALL_QUERIES -I/opt/libxine1-pluto/include -I/opt/linphone-1.3.5/include  -Wall -                                                                                            fPIC - ggdb3 -fmessage-length=0 Main.cpp -o Main.o
 ../DCE/DeviceData_Base.h: In member function âbool DCE::DeviceData_Base::WithinC                                                                                             ategory(long int, DCE::DeviceCategory*)â:
 ../DCE/DeviceData_Base.h:397: warning: comparison between signed and unsigned in                                                                                             teger expressions
 ../DCE/DeviceData_Impl.h: In member function âint DCE::MAME_PlugIn_Data::Get_Pri                                                                                             ority()â:
 ../DCE/DeviceData_Impl.h:51: error: âstd::map<int, std::basic_string<char, std::                                                                                            char_traits<char>, std::allocator<char> >, std::less<int>, std::allocator<std::p                                                                                             air<const int, std::basic_string<char, std::char_traits<char>, std::allocator<ch                                                                                            ar> >  > > > DCE::DeviceData_Impl::m_mapParametersâ is private
 ../Gen_Devices/MAME_PlugInBase.h:98: error: within this context
 ../Media_Plugin/MediaListGrid.h: At global scope:
 ../Media_Plugin/MediaListGrid.h:143: warning: âbool FileBrowserInfoComparerLastV                                                                                             iewed(FileBrowserInfo*, FileBrowserInfo*)â defined but not used
 ../Media_Plugin/MediaListGrid.h:148: warning: âbool FileBrowserInfoComparerTrack                                                                                             (FileBrowserInfo*, FileBrowserInfo*)â defined but not used
 make: *** [Main.o] Error 1
 linuxmce@dcerouter:~/trunk/src/MAME_PlugIn$ sudo cp MAME_PlugIn.so /usr/pluto/bi                                                                                            n
 cp: cannot stat `MAME_PlugIn.so': No such file or directory

Is there anyone who has an idea why this happend.

Something that I had to change from the instructions is that to get to the directory MAME_PlugIn i had to alter the command

cd ../../MAME_PlugIn  INTO ==> cd ../MAME_PlugIn






17
Users / Re: New LinuxMCE user: how to add video and music files to core server
« on: February 12, 2009, 11:10:35 pm »
For ripping your dvd´s do not forget to install the additional software.

http://wiki.linuxmce.org/index.php/Rip_a_CD/DVD_to_the_Core

18
Users / Re: Gyration GYR3101 f6 and f8
« on: February 11, 2009, 10:25:52 pm »
Why don´t you check the webpage. If it can recognize your button it is just two clicks to get F6 en F8 programmed.

http://www.ollisalonen.com/btnx/


19
Installation issues / Any reasons why I should not use this motherboard iBase MB899F
« on: February 11, 2009, 08:28:58 pm »
Over the last few weeks I got to know LinuxMCE a bit better. It is time to build a system now that fits in my living-room. I have found the following motherboard. I know that nvidia is prefered over ATI. But what about the video chip that is on this board ?

Secondly is there anyone that knows reasons why I should not go for this board ?

Want to use UI2 with overlay and s-video output.

In stead of copying all the specs I add a direct link to the motherboard and only give the main information that I thought is most important.
http://www.ibase.com.tw/mb899.htm (it is the f version)

CPU Socket
Socket M
CPU
Supports Intel® Core™ 2 Duo/ Duo /Solo processors
Up to 2.33GHz
CPU Front Side Bus ( FSB )
533Hz / 667MHz
Chipset
Intel® 945GM / 945GME chipset
ICH7M
Integrated VGA
Intel® 945GM/GME integrated VGA for CRT/TV out
Supports DVMT 3.0 for memory allocation
LVDS
Intel® 945GM(E) integrated for 18-bit dual channel LVDS
Optional ID390 with Chrontel 7308 for 24-bit LVDS
VGA Options
Optional single/dual DVI cards with connectors on card or via cable
Primary LAN
ICH7M integrated 10/100 BaseT Ethernet
Secondary LAN (MB899F only)
Marvell 88E8053 PCI Express Gigabit Ethernet
Audio
ICH7M integrated audio with AC97 codec
Onboard NS LM4950 amplifier
IrDA
Pin header
Expansion Slot
PCI, MiniPCI, PCI-E(1), Mini PCIe

I really appreciate all feedback

20
Users / Re: Gyration GYR3101 f6 and f8
« on: February 11, 2009, 08:19:41 pm »
I am not sure about that mouse. I am using a logitech AIR MX. I was not able to get it to work as described on the wiki, but you could try that first:
http://wiki.linuxmce.org/index.php/Use_Additional_Mouse_Buttons

not sure why it didn´t work for me. After some research I used a piece of software. This was very easy to setup.
http://wiki.linuxmce.org/index.php/Logitech_MX_Air

Hope you get it to work soon as it is a brilliant way of controlling your system

21
Users / Re: How to auto start programs on LMCE
« on: February 10, 2009, 11:28:54 am »
Just to renew the post I altered the subject.

I managed to get the right instruction as rc.local works when run from a console. Can I use rc.local in /etc ?

If the answer is yes how do I get it to run on my system.
If the answer is no could I add the line somewhere else so it will be run.



22
Users / Re: Add songs to playlist during playback
« on: February 10, 2009, 11:21:49 am »
Just a question, I am trying to follow the discussion.

Is it possible already in 7.10 to change this behavior centrally for all Orbiters in the media plugin ?

23
Installation issues / Re: can't get web orbiter play any Media (audio, video)
« on: February 09, 2009, 03:21:41 pm »
Nice, discussion, but why do pictures play on your orbiter and not on the screen of the media director ?
 ??? ;D


24
Users / Add songs to playlist during playback
« on: February 08, 2009, 06:46:08 pm »
I am wondering if I can change the current behavior of MCE a bit. When you add a song through the orbiter to your current playlist it starts to play right away. Is there a way to add it to the playlist without starting the song right away and continue the playing song.

25
Installation issues / Re: Tuner Card's not being detcted at install
« on: February 06, 2009, 03:32:21 pm »
Hi, I am still working to get my card working. I am first trying to get it to work in the KDE environment to see if it works there before trying in LMCE.

Is this already working for you?

I am using some help from the ubuntu forum. This is the post:

http://ubuntuforums.org/showthread.php?t=1057278

Success


26
Users / Can I use rc.local in /etc to startup progs
« on: February 04, 2009, 06:10:37 pm »
I am using Hellanzb on my core. I want it to start at boot. I found a way to do this in linux. Will this work on LinuxMCE aswell or is there are better way of doing this on LMCE ?

 Just add this line inside /etc/rc.local and change $HELLAUSER to whatever your username is.

 su -c '/usr/bin/screen -S hellanzb -d -m /usr/bin/python /usr/bin/hellanzb.py > /dev/null 2> /dev/null' $HELLAUSER

Can i use user linuxmce here or do they want another user ?

27
Users / Re: New install advice please - rack mounted, telephony & orbiters
« on: February 03, 2009, 12:46:52 pm »
I do not have an answer for you but if I would look for advice on a different forum. I would ask my question on a hardware forum. In the Netherlands I use Tweakers.net but for sure there are several of these forums in your language. They will help you on al kinds of questions for your case.

Hope this brings you forward on you project as I think it is a brilliant solution. For example I first installed it on a desktop system to get familiar and take my time to look for a case that I like.

Success

28
Users / Re: USB printer/ Network sharing printers
« on: February 02, 2009, 11:27:41 pm »
Hi cool addition. It is pointing to a category printers that does not exist yet. Who could add a catergory printers to the wiki. I tried but I could not make a copy from the mainboards for example to create it.



29
Installation issues / Re: Pulling my hair out after a weekend of failed attempts
« on: February 02, 2009, 05:31:24 pm »
Are you trying with User Interface 1 (UI1) in the AVwizard ?

30
Installation issues / Re: Using additional button on Logitec MX Air (is this solution fine with LMCE ?
« on: February 02, 2009, 10:24:08 am »
Well, I am willing to help but half you are saying I am not familiar with. I would need a lot of guidance, but for sure I want to help and test this.

Let me know if you have time for doing this together.



Pages: 1 [2] 3 4 ... 7