Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - fastie81

Pages: 1 ... 6 7 [8] 9 10
Installation issues / Re: eee-box 202 and lmce 8.10
« on: July 28, 2009, 10:03:28 pm »

Ok if you go into the BIOS in the eeebox
then go to Boot -- > Boot Settings Configuration -- > Wait for 'F1' Error
Then Disable that..
I think that will fix it..
Let me know.

Installation issues / Re: eee-box 202 and lmce 8.10
« on: July 28, 2009, 09:33:51 pm »
There should be an option to "ignore errors". I will have a look later on my box and let you know the option..

Installation issues / Re: Mythtv frontend won't load
« on: July 23, 2009, 11:21:33 pm »

So are you MD with vdpau and that work fine?
To me it looks like on my core/hybrit it still trying to load the old mythfrontend end.
Have you tried to run mythfrontend in kde and see if it works?

Installation issues / Re: Mythtv frontend won't load
« on: July 23, 2009, 01:59:27 am »

Did you manage to get this fixed?
I have the same problem now..

Installation issues / Re: eee-box 202 and lmce 8.10
« on: July 23, 2009, 12:17:15 am »

Ok this is my steps..
This is still a Draft, when I am done I will at it to the LMCE wiki
Let me know how you get on.

Users / Re: HDHomeRun DVB-T version....
« on: July 22, 2009, 01:14:47 am »
Hi Guys

To come back to the question..
Is this working now with sound on the mythbuntu weekly build?
Any one got any news on this?

Installation issues / Re: eee-box 202 and lmce 8.10
« on: July 21, 2009, 11:17:04 pm »

I have two eeebox (B202) running in my setup.
My core died last week so I have just reinstalled it again. I will be setting up them again.
My only problem I had was the 720p/DVI out put and my IR MCE remote. besides that there was not problems..
I will be doing a step by step tonight if you are interested.

Users / Re: Universal V4L Package available - installs on 0710 & 0810
« on: July 21, 2009, 01:04:00 am »

Will this only work for DVB-T PCI cards or will it work with the HDHomeRun DVB-T to?

Users / Re: 810 Alpha 7 No DVD playback sound
« on: July 16, 2009, 01:18:36 am »
hi Guys

Ok I have not got a linuxmce folder under home. So I when an look in every one I had if there was one. And there is nothing..

Now relating to the media. I am using the same DVD and DVD-Rom in both lmce and Mythbuntu. and link I said it works in Mythbuntu. So I am ruling out my sound system and the DVD-Rom.
My sound works fine it KDE and lmce if I use a move on my disk.. but DVD does not work in lmce or KDE no matter what application I use in  KDE.

Let me know if you guys need any more info..

Users / Re: 810 Alpha 7 No DVD playback sound
« on: July 15, 2009, 01:45:13 am »

Yes I am using SPDIF out put..
I have un-muted all my IEC958 devices
Here is my asound.conf file
pcm_slave.convert48k {
   pcm "spdif"
   rate 48000

pcm.spdif_playback {
   type plug
   slave convert48k

pcm.asym_spdif {
   type asym
   playback.pcm "spdif_playback"
   capture.pcm "plughw:0"

pcm.asym_analog {
   type asym
   playback.pcm "plug:dmix"
   capture.pcm "plughw:0"
pcm.!default asym_spdif

This is weird it is just not working in lmce.

Users / Re: 810 Alpha 7 No DVD playback sound
« on: July 14, 2009, 06:08:10 am »
I have now reinstalled my system a few time and it still does not work..
I have tested it again on Mythbuntu and it work with no problems
I have this time not updated the kernel or the alsa driver..
Any one has any indication what this may be or where I can start looking...

Developers / Re: Possible new layout for UI1
« on: July 14, 2009, 12:33:17 am »
Just one question on UI2?
Is this not going away from making the media the focal point?
I really thing that is way to much going on, on the screen
UI1 does look good..
UI1 = +1
UI2 = No


Installation issues / Re: Hauppauge WinTV-HVR-4000
« on: July 06, 2009, 05:39:08 am »
Hi Schmich

I have the HVR 3000 and if I am not mistaken this is sort of the same card..
Now if you say you have your dev/dvb/adapter0 folder have a look under it and see is there is like 8 files.. like frontend0 and frontend1

now with mine, Myth is not really working with the Tri -cards.. so what I needed to do is after I saw the frontend0 and 1 and others devices, is do the following..
      1)you need to create another adapter. so do the following in /dev/dvb "sudo mkdir adapter1" then create simbol links.
        " mkdir /dev/dvb/adapter1
          " ln /dev/dvb/adapter0/demux1 /dev/dvb/adapter1/demux0
          " ln /dev/dvb/adapter0/fronted1 /dev/dvb/adapter1/frontend0
          " ln /dev/dvb/adapter0/net1 /dev/dvb/adapter1/net0
          " ln /dev/dvb/adapter0/dvr1 /dev/dvb/adapter1/dvr0
     2)  After this you should be able to see the device in Mythtv 2 DVB devices. select 1 not 0 cause 0 is DVB-S. Test Myth and see if you can get something..
     3) Now to make this perminant we need to create a file in /etc/init.d/ call it what you want.
     4) then copy point 2 in to it and cave it..
     5) Now we need to make it a executable with "chmod +x {FileName}"
     6) Now w need to tell rc to run the script when booting, use this "update-rc.d {filename} defaults"

Now Myth does not pay HD channels, but I saw here that the guys sort of got it working in the UK so you may be in luck
Hope this helps you
Ps: I got this working on Mythbuntu 9.04 and on lmce you can have alook if it helps..

Let me know when you got that page up..
That would be great..


I had a big problem with the usb converter..
I got it working with the TESTSERIAL just like you but lmce does not like it..
So just so make sure I did not do something stuped I got a SERIAL card and test it again.
LMCE picked it strait away.
So if I am you I would test that is you can.
I really dig in to finding out what is up and it looks like a lot of the usb converters now are emulating a serial port. But then I also have to say there is a lot of guys that got it working with no problem..

So I know it is not helping you much but you may want to give it a if you can..


Pages: 1 ... 6 7 [8] 9 10