Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - joerod

Pages: 1 ... 5 6 [7] 8 9 ... 11
91
Users / Re: Mini ITX package's for mds
« on: April 28, 2011, 08:04:30 pm »
From what I understand there will be better intel video support with 1004; but my expierence with intel video in 0810 was not good. The md installs and ui1 works good; but ui2 does not and no hardward excelleration means most videos look crappy.

Maybe with 1004 X will better support the newer intel drivers, but for now I would agree with other posters that ION is the best way to go (even if intel is better supported in 1004 I'd still go with ION); it'll be worth the money

92
ok, I'll check it out.  Thanks for the reply.

93
Well, I only have one web orbiter setup; and when I start up roamingorb on the ipod it connects and displays the interface.  That should mean the port/address is correct, right?

94
I'm not sure if I set something up incorrectly (I was a little tired) but i tried setting up roaming orbiter lastnight and everything looked great... I got the orbiter connected and I could see that main screen; but I couldn't actually click on anything... I would tough the screen and the loading logo would show for a second then it would disappear but nothing else wold happen... I did notice that sometimes when I'd touch the screen the floorplan would show up or the change room menu... but then I couldn't click on anything...

am I missing some setting?  I was almost like the screen wasn't calibrated...

95
Users / Re: WebDT
« on: April 01, 2011, 05:12:00 pm »
am I correct in assuming that padOrbiter V2 is not for the webDts... right?

96
Users / Re: WebDT
« on: March 19, 2011, 04:14:54 pm »
I usually have mine tethered, but sometimes when watching a movie I leave it unplugged and it lasts the whole movie... so I would say mine lasts anywhere from 30-120 mins...

97
Users / Re: mkv no worky after upgrades
« on: March 09, 2011, 05:02:37 am »
a recent update to xine fixed every single problem I had playing back mkvs

http://forum.linuxmce.org/index.php?topic=11497.0

just wanted to let anyone know who has had similar problems.

Thanks phenigma

98
Users / Re: xine-lib and video playback issues?
« on: March 09, 2011, 05:01:04 am »
I've had a lot of problems playing different kinds of mkv files ...

http://forum.linuxmce.org/index.php?topic=11161.0

and this fixed every single problem, thanks phenigma

99
Users / Re: xine-lib and video playback issues?
« on: March 05, 2011, 07:16:59 pm »
not sure if I'm the only one but the link did not exactly work... I took me to the upload site; but after waiting the 60 seconds to download; I got "Page cannot be displayed".  I really want to apply this to see if it fixes some playback issues I have, but I can't download it...

100
Users / Re: Probem with camera device from orbiters
« on: March 05, 2011, 05:20:02 am »
DCErouter.log says this when I try to view a camera from orbiter or webadmin (motion is running and recording are being stored correctly and cameras a viewable thought the ports created by motion :8000-8002:

08      03/05/11 0:08:35.667            Received Message from 0 (unknown / ) to 60 (Generic Analog Camera / Backyard), type 1 id 84 Command:Get Video Frame, retry none, parameters: <0x38e90b90>
08      03/05/11 0:08:35.667              Parameter 19(Data): 0 <0x38e90b90>
08      03/05/11 0:08:35.667              Parameter 20(Format): jpg <0x38e90b90>
08      03/05/11 0:08:35.667              Parameter 23(Disable Aspect Lock): 0 <0x38e90b90>
08      03/05/11 0:08:35.667              Parameter 31(): 0 <0x38e90b90>
08      03/05/11 0:08:35.667              Parameter 60(Width): 100 <0x38e90b90>
08      03/05/11 0:08:35.667              Parameter 61(Height): 100 <0x38e90b90>
05      03/05/11 0:08:35.764            Socket::ReceiveData 0x8ac8f58 failed, bytes left 0 start: 512620000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 10 Incoming_Conn Socket 10 127.0.0.1 <0x38e90b90>
05      03/05/11 0:08:35.765            Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 10 127.0.0.1 <0x38e90b90>
05      03/05/11 0:08:35.765            TCPIP: Closing connection to -1003 (Router Dev #0) 0x8ac8f58 m_Socket: -1 <0x38e90b90>
05      03/05/11 0:08:35.765            Router::RemoveAndDeleteSocket 0x8ac8f58 -1003 <0x38e90b90>
07      03/05/11 0:08:36.121            Event #75 has no handlers <0xa388db90>

101
Users / Re: Probem with camera device from orbiters
« on: February 20, 2011, 05:09:43 am »
I did some more investigating and found this in the motion log file:

========== NEW LOG SECTION ==========
1   02/20/11 00:03:27   57 (spawning-device)   Starting... 1
1   02/20/11 00:03:27   57 (spawning-device)   Found /usr/pluto/bin/Motion_Wrapper
05   02/20/11 0:03:28.864      Connect() failed, Error Code 111 (Connection refused)) <0xb70fa6c0>
05   02/20/11 0:03:29.864      Connect() failed, Error Code 111 (Connection refused)) <0xb70fa6c0>
05   02/20/11 0:03:30.864      Connect() failed, Error Code 111 (Connection refused)) <0xb70fa6c0>
05   02/20/11 0:03:31.864      Connect() failed, Error Code 111 (Connection refused)) <0xb70fa6c0>
05   02/20/11 0:03:32.864      Connect() failed, Error Code 111 (Connection refused)) <0xb70fa6c0>
05   02/20/11 0:03:42.044      Creating child 59 <0xb70fa6c0>
05   02/20/11 0:03:42.044      Note: Device manager has attached a device of type 66 that this has no custom event handler for.  It will not fire events. <0xb70fa6c0>
05   02/20/11 0:03:42.044      Note: Device manager has attached a device of type 66 that this has no custom handler for.  This is normal for IR. <0xb70fa6c0>
05   02/20/11 0:03:42.044      Creating child 60 <0xb70fa6c0>
05   02/20/11 0:03:42.044      Note: Device manager has attached a device of type 66 that this has no custom event handler for.  It will not fire events. <0xb70fa6c0>
05   02/20/11 0:03:42.044      Note: Device manager has attached a device of type 66 that this has no custom handler for.  This is normal for IR. <0xb70fa6c0>
05   02/20/11 0:03:42.044      Creating child 104 <0xb70fa6c0>
05   02/20/11 0:03:42.044      Note: Device manager has attached a device of type 66 that this has no custom event handler for.  It will not fire events. <0xb70fa6c0>
05   02/20/11 0:03:42.044      Note: Device manager has attached a device of type 66 that this has no custom handler for.  This is normal for IR. <0xb70fa6c0>
05   02/20/11 0:05:24.934      Could not take snapshot, fail sending SIGALRM signal... <0xb58f6b90>
05   02/20/11 0:05:25.176      Could not take snapshot, fail sending SIGALRM signal... <0xb58f6b90>



it would seem the three analog cameras don't have a "custom event handler" I'm not sure what that means.... but I did follow these directions very carefully: http://wiki.linuxmce.org/index.php/Monitor_surveillance_cameras

any suggestions?

102
any news on this?

103
Users / Re: Probem with camera device from orbiters
« on: February 12, 2011, 04:13:05 am »
well, I'm not exactly sure what its suppose to say in the scenario editor in webadmin but i have to select "Edit scenario using wizard:  Advanced Wizard" and that indicates PK_screen: 15 and PK_device: <correct camera device id>

so i guess its ok, and again in the web admin "securty - cameras" it lists the cameras but then just show a broken link (file) where the camera image should be...

but in /home/cameras/<deviceid>/2011/2/11/<recording, snapshots, etc>  i have the correct data...

is this a bug, known issue, or I misconfigured something?

104
Users / Probem with camera device from orbiters
« on: February 11, 2011, 02:29:17 pm »
I don't know if I missed something, but I reinstalled the core using the latest snapshot this weekend and worked fairly well (I will update the wiki and check the tickets as Saturday night).  I'm having a small issue I didn't have before and thate security camera setup... 

Motion records perfectly and has all the folders setup correct (had to fix the permissions inside /home/cameras/) but it is saving the latest shots, recordings, timelapse, etc.  These are analog cameras using a bluecherry capture card. 

So, everythings cool; but when I click on the device using the padorbiter or any on-screen orbiter (including webadmin).  I don't get a picture.  according to syslog motion seems to start up fine; I can even see a picture if I access "http://dcerouter:<motion created port>"

Is this this a known issue with the lastest snapshot or am I missing something...

105
Users / Re: mkv no worky after upgrades
« on: February 08, 2011, 02:12:21 am »
uh... try what?

Pages: 1 ... 5 6 [7] 8 9 ... 11