This looks promising

http://www.linuxreaders.com/2011/03/09/android-access-internet-from-computer-via-usb/

also easytether has something
http://www.mobile-stream.com/easytether/android_faq.html#linuxsetup

here is some who got it working with easytether driver...
http://androidforums.com/samsung-vibrant/136277-vibrant-usb-tether-ubuntu-success.html

proxoid looks promissing as well   might try on my kubuntu desktop later

this is off topic  but  love the handle  dave  lol

Is it possible to tether lets say a straight talk samsung android to the core for the wan connection...

usb would be fine...

Just asking i know i can ( have not tried in ubuntu ) but interested   

Vsat blows   and the tether would be my only other option..

 

  I'll be moving into our new house and so all my media equipment as well...  may a while before I
have time and money to setup properly..

  I may also rework my lmce system as well since my core/hybrid died and have to rebuild...

  I may end up with a true core system with 2x MD's

  I will change it in user setups when It evolves

I will not know until I get my replacement parts.   Very well could of been motherboard hardware
causing issues,  or still the motionwrapper....

Got the Mobo/mem  still waiting for the am3 x2 2.2ghz

When I have reworked the hybreed  ill post back

ps: I have downloaded the 8.10 final as well

Tried the config string for gyration remotes with a no go....but now my mainboard died


Got parts on way....noted witch ones and plans in my user setup...


Once system is rebuilt ill try again

sry i was using rc 2

did a clean install of 810 final

most everything went well  noticed a couple this...

#1
I am having alot of gen/reloads at random...
( This may be do to MotionWrapper = running one anolog camera+foscam clone+linksys ip cams )

camera's seem to work properly but i noticed if i remove motionwrapper and cams the regen/reloads stop

#2 I have two gryration 301 mce remotes.....back in beta they where detected and installed and basicly all buttons funtioned properly..  now in final basicly the mouse gest buttons work.

thought you would like to know...

my hdhomerun, and NAS's where found and working properly so far...  and the interface seems faster by a bit 


let me know if any had this issue as well

Spinns on the floor like a headless chicken

 

Looking at a 32GB ssd SATA 2 drive for the new core's operating drive... currenty have std sata2 500gb

Most of my media is on NAS drives
questions:

• Will it be big enough for the install?
• Any true speed difference -vs- hdd?

  The main problem is that android has far and few tabletop -and- wall docks....

To buy a apple product is way far off budget..

the DT webpad looks promising

I could go for a cheap android tablet 7-10 inch
 -or-
run a dell axim with wince app.. witch i had a soo so operating axim 50v witch had wifi and a tabletop cradle and seemed to run ok for a interface..

On the most part...

#1 - getting a new house might put hybrid as a main interface with a 19" touch screen on wall in the
kitchen or attached area for main access.

#2 - pda -or- android tablet's for roaming orbiters per room or level..

#3 - rf/bt mini keyboard/touch mouse / gyration remote's as main control per media area's 

the one thing is I use Firefox alot in my room and living room but it sounds like the orbitor keyboard/mouse input might get trashed "shame"

And yes I know a android would be a cheaper alt but I am wondering...  I have found no good Android tablet tabletop/wall
docks..

Dual display output... eg

Tv = HDMI DVI  (no OSD )

Touch screen monitor (ELO) ect as OSD + Touchscreen...  (vga/dvi)


Is this a possible?

having this  issue with a anolog camera on a bt878a card   was working before

========== NEW LOG SECTION ==========
1   05/07/11 08:03:17   82 (spawning-device)   Starting... 1
1   05/07/11 08:03:17   82 (spawning-device)   Found /usr/pluto/bin/Motion_Wrapper
05   05/07/11 8:03:17.139      Creating child 84 <0xb719a6c0>
05   05/07/11 8:03:17.139      Note: Device manager has attached a device of type 66 that this has no custom event handler for.  It will not fire events. <0xb719a6c0>
05   05/07/11 8:03:17.139      Note: Device manager has attached a device of type 66 that this has no custom handler for.  This is normal for IR. <0xb719a6c0>
05   05/07/11 8:03:34.533      Could not take snapshot, fail sending SIGALRM signal... <0xb5996b90>
05   05/07/11 8:03:39.752      Could not take snapshot, fail sending SIGALRM signal... <0xb5996b90>
05   05/07/11 8:03:44.900      Could not take snapshot, fail sending SIGALRM signal... <0xb5996b90>
05   05/07/11 8:03:50.053      Could not take snapshot, fail sending SIGALRM signal... <0xb5996b90>

Most people who come into my house love the media -and- cctv aspect of linuxmce....

Will there ever be a zonemider style cctv interface in Linuxmce ( for reveiwing motion/recorded events + archiving ect)?

Just wondering thats all