The new installer scripts have now replaced the legacy install scripts. The wiki site has been updated:
http://wiki.linuxmce.org/index.php/Installing_1004


Please let me know if you have any issues.

Hi gents - this is correct, I have an updated id-my-disc package that posde is reviewing that will correct this.

The fix is simple and detailed in http://svn.linuxmce.org/trac.cgi/ticket/1255 - essentially if you create a logical link to the updated library file, EMI will launch. Installing the old package works too.

Thank you bongo!

ha - thanks possy

Hi Fibres, at this point all you should need to do is:
apt-get -qq update; apt-get -y upgrade

FYI - via trac ticket http://svn.linuxmce.org/trac.cgi/ticket/1265 I've implemented and tested a couple of MD builds with the Foxconn NT330i, this should now be seamless and not require any manual intervention as it did on 810.

I've also updated the wiki to distinguish between the 810 and 1004 setup: http://wiki.linuxmce.org/index.php/Foxconn_nT330i

This update will be available to everyone on the next deb re-package, which happen every couple of days. Once this repackage occurs you will need to re-run the /usr/pluto/bin/Diskless_CreateTBZ.sh (it takes about 30 minutes give or take). If you already have a media director built and want to test this out, go into the web admin and select media director --> scroll down to your media director and click 'rebuild image' - this will leverage the new compressed image created by the Diskless_CreateTBZ.sh file.

New installations should be able to simply plug and play.

I was finally able to reproduce this on a fresh MD install of 1004. I've updated the SQLCVS repo with batch 3468 to correct it with the mappings in this thread. Moving forward the gyrations should 'just work' for everyone.

fyi - updates for MD setup/creation I'm tracking here: http://svn.linuxmce.org/trac.cgi/ticket/1265

Now that the core installer seems to be working for at least a few people, I'm going through the diskless creation script, tracking work on trac ticket:
http://svn.linuxmce.org/trac.cgi/ticket/1265

here are the manual steps I've made to this point:

Code:

cp /usr/pluto/deb-cache/Packages.gz /usr/pluto/diskless/58/usr/pluto/deb-cache/
chroot /usr/pluto/diskless/58/
wget -q http://packages.medibuntu.org/medibuntu-key.gpg -O- | apt-key add -
apt-get -f install
adduser public #for pluto-mythtv package postinst script
apt-get -y upgrade

Very odd, I'm still working to get my MDs online, but this is output from my core (no apparant issues)

Code:

dcerouter_1021129:~# apt-cache policy pluto-lirc-wrapper
pluto-lirc-wrapper:
  Installed: (none)
  Candidate: 2.0.0.45.11092824858
  Version table:
     2.0.0.45.11092824858 0
        500 http://deb.linuxmce.org/ubuntu/ lucid/beta2 Packages
dcerouter_1021129:~# apt-get install -y pluto-lirc-wrapper
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libftdi1 liblircclient-dev liblircclient0 lirc lirc-modules-source lirc-pluto pluto-irbase pluto-messagetrans setserial
Suggested packages:
  lirc-x kernel-source
The following NEW packages will be installed:
  libftdi1 liblircclient-dev liblircclient0 lirc lirc-modules-source lirc-pluto pluto-irbase pluto-lirc-wrapper pluto-messagetrans setserial
0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded.
Need to get 1,636kB of archives.
After this operation, 10.9MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  liblircclient0 liblircclient-dev libftdi1 setserial lirc lirc-modules-source lirc-pluto pluto-irbase pluto-messagetrans pluto-lirc-wrapper
Authentication warning overridden.
Get:1 http://us.archive.ubuntu.com/ubuntu/ lucid-updates/main liblircclient0 0.8.6-0ubuntu4.2 [88.8kB]
Get:2 http://deb.linuxmce.org/ubuntu/ lucid/beta2 lirc 0.8.6-0ubuntu4.2+lmce1 [692kB]
Get:3 http://us.archive.ubuntu.com/ubuntu/ lucid-updates/main liblircclient-dev 0.8.6-0ubuntu4.2 [91.6kB]
Get:4 http://us.archive.ubuntu.com/ubuntu/ lucid/main libftdi1 0.17-1 [17.9kB]
Get:5 http://us.archive.ubuntu.com/ubuntu/ lucid/main setserial 2.17-45.2 [52.4kB]
Get:6 http://deb.linuxmce.org/ubuntu/ lucid/beta2 lirc-modules-source 0.8.6-0ubuntu4.2+lmce1 [479kB]
Get:7 http://deb.linuxmce.org/ubuntu/ lucid/beta2 lirc-pluto 0.1.1 [1,936B]
Get:8 http://deb.linuxmce.org/ubuntu/ lucid/beta2 pluto-irbase 2.0.0.45.11092824858 [61.4kB]
Get:9 http://deb.linuxmce.org/ubuntu/ lucid/beta2 pluto-messagetrans 2.0.0.45.11092824858 [72.9kB]
Get:10 http://deb.linuxmce.org/ubuntu/ lucid/beta2 pluto-lirc-wrapper 2.0.0.45.11092824858 [78.1kB]
Fetched 1,636kB in 5s (281kB/s)
Preconfiguring packages ...
dpkg: warning: obsolete option '--print-installation-architecture', please use '--print-architecture' instead.
Selecting previously deselected package liblircclient0.
(Reading database ... 153698 files and directories currently installed.)
Unpacking liblircclient0 (from .../liblircclient0_0.8.6-0ubuntu4.2_i386.deb) ...
Selecting previously deselected package liblircclient-dev.
Unpacking liblircclient-dev (from .../liblircclient-dev_0.8.6-0ubuntu4.2_i386.deb) ...
Selecting previously deselected package libftdi1.
Unpacking libftdi1 (from .../libftdi1_0.17-1_i386.deb) ...
Selecting previously deselected package setserial.
Unpacking setserial (from .../setserial_2.17-45.2_i386.deb) ...
Selecting previously deselected package lirc.
Unpacking lirc (from .../lirc_0.8.6-0ubuntu4.2+lmce1_i386.deb) ...
Selecting previously deselected package lirc-modules-source.
Unpacking lirc-modules-source (from .../lirc-modules-source_0.8.6-0ubuntu4.2+lmce1_all.deb) ...
Selecting previously deselected package lirc-pluto.
Unpacking lirc-pluto (from .../lirc-pluto_0.1.1_all.deb) ...
Selecting previously deselected package pluto-irbase.
Unpacking pluto-irbase (from .../pluto-irbase_2.0.0.45.11092824858_i386.deb) ...
Selecting previously deselected package pluto-messagetrans.
Unpacking pluto-messagetrans (from .../pluto-messagetrans_2.0.0.45.11092824858_i386.deb) ...
Processing triggers for ureadahead ...
ureadahead will be reprofiled on next reboot
Processing triggers for man-db ...
Processing triggers for hal ...
Regenerating hal fdi cache ...
Setting up liblircclient0 (0.8.6-0ubuntu4.2) ...

Setting up liblircclient-dev (0.8.6-0ubuntu4.2) ...
Setting up libftdi1 (0.17-1) ...

Setting up setserial (2.17-45.2) ...
dpkg: warning: obsolete option '--print-installation-architecture', please use '--print-architecture' instead.
removing the old setserial entry in the rcn.d directories
Update complete.
dpkg: warning: obsolete option '--print-installation-architecture', please use '--print-architecture' instead.
dpkg: warning: obsolete option '--print-installation-architecture', please use '--print-architecture' instead.
Saving state of known serial devices... backing up /var/lib/setserial/autoserial.conf done.

Setting up lirc (0.8.6-0ubuntu4.2+lmce1) ...

Setting up lirc-modules-source (0.8.6-0ubuntu4.2+lmce1) ...
Loading new lirc-0.8.6 DKMS files...
First Installation: checking all kernels...
Building only for 2.6.32-33-generic
Building for architecture i686
Building initial module for 2.6.32-33-generic
Done.

lirc_dev.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_atiusb.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_bt829.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_ite8709.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_i2c.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_igorplugusb.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_imon.ko:
Running module version sanity check.

Error! Module version 0.6 for lirc_imon.ko
is not newer than what is already found in kernel 2.6.32-33-generic (0.6).
You may override by specifying --force.

lirc_it87.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_mceusb.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_ttusbir.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_sasem.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_serial.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_sir.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_streamzap.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_ene0100.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

lirc_wpc8769l.ko:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.32-33-generic/updates/dkms/

depmod.....

DKMS: install Completed.

Setting up lirc-pluto (0.1.1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Selecting previously deselected package pluto-lirc-wrapper.
(Reading database ... 155218 files and directories currently installed.)
Unpacking pluto-lirc-wrapper (from .../pluto-lirc-wrapper_2.0.0.45.11092824858_i386.deb) ...
Setting up pluto-irbase (2.0.0.45.11092824858) ...

Setting up pluto-messagetrans (2.0.0.45.11092824858) ...

Setting up pluto-lirc-wrapper (2.0.0.45.11092824858) ...

dcerouter_1021129:~#

Thanks fibres - I've committed update #24871 which updated all the PCI IDs for nvidia for lucid, this included yours as well! What i found odd is that your PCI ID didn't show up under 173 or 96 but did show up under the 260, so the next time the script is invoked for you it will work.

At this point you have a couple of options to get the updated file:

1. wait for the next package compile, which lately has been once every day or so

or

2. download the file directly with the command: wget http://svn.linuxmce.org/svn/branches/LinuxMCE-1004/src/BootScripts/nvidia-install.sh

Since the file has no other dependencies that could hork up and the change was so minimal it shouldn't be a big deal to download it directly, just make sure if you do option 2 you replace the existing file in /usr/pluto/bin/ with the proper permissions. -rwxr-xr-x  (wget downloads items as non-executable, so do a chmod +x /usr/pluto/bin/nvidia-install.sh after downloading and placing the file).

Then undo any comments you did for the init scripts and retest!

FYI - I've logged trac ticket http://svn.linuxmce.org/trac.cgi/ticket/1263 to track this work

Would you run this on your device and verify the return is 10c3?

Code:

lspci -nn | grep -vi "non-vga" | grep -i vga | sed 's/.*://;s/\].*//'

I'll help you fibres, it looks like your graphics card on 10.04 should be running nvidia-glx-185 and not 160, i'm taking a look at the script now.