Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - FireMail

Pages: [1] 2
1
Users / Re: 7 random questions
« on: March 04, 2010, 04:39:19 pm »
make it auto or vdpau - then it works

2
Installation issues / Re: NVIDA H264 Codec
« on: March 04, 2010, 09:14:02 am »
Another problem detected with MPlayer_player:
after stopping the watch of a .m2ts movie, the mplayer process hangs, so i need to kiil -9 process #.
Anyone confirm this?
TIA.
works fine here

3
Users / Re: 7 random questions
« on: March 04, 2010, 09:11:25 am »
mplayer is now working with vdpau - heavily reduced cpu load :)

thanks a lot!

4
Installation issues / Re: NVIDA H264 Codec
« on: March 01, 2010, 02:27:49 pm »
MPEG2 content should be vdpau accelerated through either xine or mplayer.  What container format (File extension) are the files?
hi, its m2ts - played via mplayer.

5
Installation issues / Re: NVIDA H264 Codec
« on: March 01, 2010, 12:40:58 pm »
works very well - cpu load reduced. mplayer now gets about 24-28% depending on the movie. great work!

there is only one problem when i try to play movies recorded with my video camera (sony HDR-TG7VE). the movie itself is replaying very slowly, the audio in real time. so its getting out of sync in the first second and delays about 2-3 seconds each frame.
tech details: High Definition, AVCHD (1920 x 1080, 1440 x 1080)/Standard Definition, MPEG2

i recorded all the stuff in full HD - do i need to run that through a codec so that i can play it smoothly?

6
Installation issues / Re: NVIDA H264 Codec
« on: March 01, 2010, 10:21:35 am »
What i am doing? Trying to install the package Phenigma created.
I do have mplayer-player, but with no vdpau support.

The changes are in svn so the next beta update, which the wiki says is building now, should include the new mplayer-player package.  Wait for the update to finish and do an apt-get update/apt-get upgrade on your system.

J.
hi - thanks for your integration of vdpau into mplayer. i will test that today and give you some feedback.

where is this wiki page that tells you about the build process?

7
hi there,

i tagged about 50% of my movies now via IMDB and it works very well. The only problem i figured out is, that with german movies, it wont work that well or you have to edit atleast the title since the titles sometimes differ from the english language.
since imdb has also a german translation (imdb.de) it would be nice if you could parse the german imdb instead of the english one.

is there anything planned on this? if not, i would try to get my hands on this since imdb supports english, german, italian, spanish, portugese and french.

8
Users / Re: 7 random questions
« on: February 26, 2010, 09:18:41 am »
thanks a lot for that!
i think using VDPAU is a great feature and improvement - looking forward to hear from your results.

do you change anything else then the parameter passed to mplayer?

9
Users / Re: 7 random questions
« on: February 25, 2010, 01:23:30 pm »
4th post in a row - sorry about that ;)

i was able to configure the VDPAU support for xine by using the configuration screen provided by xine itself.
no tearing, perfect graphic quality, playing a 720p movie without lagging, 10-20% usage of the cpu.

thats how i wanted it :)

how can i do that with mplayer? using the same method by opening mplayer, configuring it, closing it, playing movie in LMCE doesnt work since its calling with the start parameters -vo "xv, x11"

10
Users / Re: 7 random questions
« on: February 25, 2010, 12:39:19 pm »
i tried setting the hardware acceleration mode to vdpau - but it wont work:
Quote
dcerouter_1008040:/home/firemail/vdpinfo# ps aux | grep mplayer
root      5325 29.6  2.2 134112 63292 pts/17   SLl+ 12:30   0:06 mplayer -slave -idle -msglevel all=4 -noborder -fixed-vo -fs -vo xv,x11 -vf screenshot -ao alsa:device=plug=dmix -ac a52, -lavdopts fast:threads=2 /usr/pluto/share/black.mpeg
so its still using xv,x11 instead of vdpau, eventhou my mplayer tells me it supports vdpau
Quote
dcerouter_1008040:/home/firemail# mplayer -vo help
MPlayer UNKNOWN-4.3.2 (C) 2000-2009 MPlayer Team
Available video output drivers:
        xmga    Matrox G200/G4x0/G550 overlay in X11 window (using /dev/mga_vid)
        mga     Matrox G200/G4x0/G550 overlay (/dev/mga_vid)
        tdfxfb  3Dfx Banshee/Voodoo3/Voodoo5
        3dfx    3dfx (/dev/3dfx)
        vdpau   VDPAU with X11
        xv      X11/Xv
        x11     X11 ( XImage/Shm )
        xover   General X11 driver for overlay capable video output drivers
        gl      X11 (OpenGL)
        gl2     X11 (OpenGL) - multiple textures version
        matrixview      MatrixView (OpenGL)
        dga     DGA ( Direct Graphic Access V2.0 )
        sdl     SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!)
        ggi     General Graphics Interface (GGI) output
        fbdev   Framebuffer Device
        fbdev2  Framebuffer Device
        svga    SVGAlib
        aa      AAlib
        caca    libcaca
        dxr3    DXR3/H+ video out
        v4l2    V4L2 MPEG Video Decoder Output
        directfb        Direct Framebuffer Device
        dfbmga  DirectFB / Matrox G200/G400/G450/G550
        xvidix  X11 (VIDIX)
        cvidix  console VIDIX
        null    Null video output
        xvmc    XVideo Motion Compensation
        mpegpes MPEG-PES to DVB card
        yuv4mpeg        yuv4mpeg output for mjpegtools
        png     PNG file
        jpeg    JPEG file
        gif89a  animated GIF output
        tga     Targa output
        pnm     PPM/PGM/PGMYUV file
        md5sum  md5sum of each frame

i found this thread:
http://forum.linuxmce.org/index.php?topic=9286.0
posted on the 09.12.2009 saying that there is still a patch pending, the wiki from 06.12.2009 says that its included
http://wiki.linuxmce.org/index.php/LinuxMCE-0810_beta

so whats the truth now? does this setting work or is it unsupported at the moment?

11
Users / Re: 7 random questions
« on: February 25, 2010, 12:16:22 pm »
i got rid of this tearing effect.

first i tried using different drivers - no effect.
using envy to configure the drivers - didnt work.

I switched down to the "static images" mode - tearing gone.
Upgraded to "medium effects" - tearing gone.

so its indeed the high-end mode that makes the tearing. I try to add vdpau to xine and mplayer and then retry using high-end mode. maybe the VDPAU reduces the CPU load so that high-end works without tearing

12
Users / Re: 7 random questions
« on: February 25, 2010, 10:27:37 am »
i will try to use the "basic" mode instead of the "high-end", lets see if it works better then.

so what do you think? switching the graphiccard to a different modell?

13
Users / Re: WebDT366 [SOLVED]
« on: February 24, 2010, 06:45:54 am »
just register an account and click on the edit link next to the topic you want to chance  ;D

14
Users / Re: 7 random questions
« on: February 23, 2010, 06:27:48 pm »
thanks a lot for all those answers. i will do research on vadpau and the downgrading to medium on thursday since i am in vienna tomorrow doing business.

the graphic card is a Zotac GT240 512 DDR3, PCI-Express, Dual Link DVI, PN 288-2n130-010ZT

thought thats a good one - the hybrid is brand new :-/

15
Users / Re: 7 random questions
« on: February 23, 2010, 03:22:10 pm »
There's a choice of...

1. UI1
2. UI2 with masking, and
3. UI2 with alpha blending.

Which one have you selected?
you mean in the initial setup screen? i just saw "high-end" which is UI2 with alpha blending ;)
but as i stated before, the graphiccard is high end, the cpu is a quadcore plus while the movie is shown there shouldnt be any rendering done.

Pages: [1] 2