Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - theteju

Pages: [1] 2 3 ... 12
Users / Re: Very slow internet access on LMCE (Solved)
« on: November 28, 2016, 02:36:08 am »
I reset my firewall settings, through webadmin, and Changed using "Static IP" to "USE DHCP"

First Few boots It did nothing and booted without network configuration.
However after two days,, It booted just fine. and everything is working as it supposed to..The system now using DHCP instead of Static IP.

I have no idea what went wrong with static IP !!

Now its working, so can't complain.


Users / Re: Very slow internet access on LMCE
« on: November 24, 2016, 03:32:54 pm »
Hello everyone, Happy Thanks Giving...!!

I apologize for very late reply. It turns out,, there is no internet on the core at all.

I really don't know how to troubleshoot this.


Users / Very slow internet access on LMCE (Solved)
« on: September 11, 2016, 08:57:32 pm »
Hey guys,,,

I am experiencing hiccups to access internet on my internal network.

here is how my setup is...

Comcast ------> LinksysRouter (Primary)-------> LMCE ---------> Netgear router(Secondary)

I only experience slow internet access when I connect to Netgear that is (internal network ) for LMCE.

No problem If i  connect to Linksys.

I am not sure how to troubleshoot.

Let me know

Thanks. Teju.

Hey guys,, I have some strange experience on last night install. here are some information about the system.
uname -r
theteju@dcerouter:~$ modinfo soundcore
filename:       /lib/modules/4.2.0-38-generic/kernel/sound/soundcore.ko
alias:          char-major-14-*
license:        GPL
author:         Alan Cox
description:    Core sound module
srcversion:     243B76FF0432C637D451917
intree:         Y
vermagic:       4.2.0-38-generic SMP mod_unload modversions 686
signer:         Build time autogenerated kernel key
sig_key:        FF:A5:A3:EC:14:C5:AA:74:9F:8B:EE:63:47:73:0C:0B:2C:0D:A4:98
sig_hashalgo:   sha512
parm:           preclaim_oss:int

theteju@dcerouter:~$ aplay -l
aplay: device_list:268: no soundcards found...
theteju@dcerouter:~$ aplay -L
    Discard all samples (playback) or generate zero samples (capture)
    PulseAudio Sound Server
    Playback/recording through the PulseAudio sound server

find /lib/modules/`uname -r` | grep snd-oxy

lspci -v | grep -A7 -i "audio"
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
        Subsystem: ASUSTeK Computer Inc. Device 82fe
        Flags: bus master, fast devsel, latency 0, IRQ 28
        Memory at fcff8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode])
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
        Subsystem: NVIDIA Corporation Device 0000
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at fe8fc000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

02:00.0 Ethernet controller: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)

dpkg -l | grep nvidia
ii  nvidia-352                                 352.63-0ubuntu0.14.04.1                                          i386         NVIDIA binary driver - version 352.63
ii  nvidia-opencl-icd-352                      352.63-0ubuntu0.14.04.1                                          i386         NVIDIA OpenCL ICD
ii  nvidia-prime                               0.6.2                                                            i386         Tools to enable NVIDIA's Prime
ii  nvidia-settings                            331.20-0ubuntu8                                                  i386         Tool for configuring the NVIDIA graphics driver

theteju@dcerouter:~$ lspci -nn | grep VGA
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 430] [10de:0de1] (rev a1)

system had third sound card from Asus Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] The sound card never worked. Therefore I decided to re run the AVwizard to get the audio from HDMI from nvidia card. and that was the end of my system.

I never got passthrough the STEP 1 of the AVwizard.

here are some logs I am attaching hope that helps.

Log of AVWizard_run
log of avwizard_setup_av

I am still playing with this,,HOping to get it back to life. while the snapshot is being downloaded.

Thanks. Teju

Users / Re: Latest i3, i5 or i7 processors hardware question.
« on: June 03, 2016, 06:15:15 pm »
Thanks guys.

Sent from my SM-T800 using Tapatalk

Users / Latest i3, i5 or i7 processors hardware question.
« on: June 03, 2016, 03:54:22 am »
 I am going to upgrade my core hardwares. I am going to built on a microatx motherboard and probably choose intel i3 or i5 processor.
I know that nvidia is preferred way to for lmce.

So here is my question. Based on the fact that these modern processor with integrated graphic support, would it work with LMCE?

That way I would get hdmi video and audio out of my motherboard itself. Only have to throw in an extra  PCI ethernet card and fly off. 

I hope my question make sense. Please advise.

Sent from my SM-T800 using Tapatalk

Users / Re: GE concord express security system
« on: May 02, 2016, 07:54:02 pm »
HI posde,

Thanks for your reply. I came across an interesting thread where people are using many methods to communicate to the GE panel. Following are the approach.
GE panel ----->  Superbus 2000 RS232 Module  ---------> arduino --------> and codes

Some are

GE panel -----> superbus 2000 RS232 module -------> RS485 ethernet converter --------> and codes

Finally someone

GE panel -----> superbus 2000 RS232 module ------> USB to serial adapter --- Raspberry pi -------> and codes

I have to admit, when it comes to programming language,, I am lost. I have no idea what they are talking about.
here is the thread I came across

I think, going through RS232 to ethernet converter is the best route to go for LMCE integration.

I will purchase the module and converter, once everything hooks up, Please guide me to get the software part work.

Users / GE concord express security system
« on: May 02, 2016, 02:36:08 am »
Hello guys,

Let me just start with, I do not even know how to explain my case. I would try my best.
I have security system installed in the house I recently purchase and I finally powered it up. the system works. I was wondering that if I can have it work with LMCE however I find there is no way to connect the system to the computer !! there is only one cable comes out from the panel looks like suppose to go to phone line to dial out. I do not think the LMCE would detect the panel through that cable.

Lead me into more search. I found out that there is a module that I can buy which would allow me to attach RS232. The module is known as
"Interlogix 60-783-02 SuperBus 2000 Automation Module with RS232". The installation instruction of the module says RS232 is configured as DCE device. I am attaching a screen shot here. Which I think LMCE should be able to talk with.

Second thing is,,, the whole purpose of security system is when something happens,, It should inform the authority. however. I am at the moment not going to buy any service. AS of now, I know that my phone system is not supported with LMCE. I use ooma voip as phone line. I have never used phone feature of the LMCE before. however I found a post where someone has Ooma system working with asterisk using linksys SPA-3102. Again, thats another topic.

that means my goal is to self monitoring the home using LMCE. For example on an event.. I want LMCE to take a pic or video or send and email to me whenever any is a sensor triggers when its armed. Anyways,, that is a long way to go.

here is the installation manuals for system and the module.

System :

So why am I posting these manuals? I do not know. Trying to provide as much info as I can.
somewhere on the manual I found that it is possible to get device BUS ID for each sensors and devices on the system. That could be helpful, Correct?
Do you guys think I am heading to right direction?
Is it possible to achieve what I want to achieve?

As I said before,, My post is all over the place. Any word from GODs would be appreciated.

Thank you very much.

Users / Re: Media not appearing 14.04 on Second hard drive.
« on: April 26, 2016, 03:11:11 am »
Never had to do something like that, but I would

* Change the setting for the drive in web admin form public to use LinuxMCE structure.
* Reboot the system
* wait a bit (or press resync)

Report back your findings.

You Sir, is truely LMCE God !
The hard drive is now properly mounted after reboot. doing Resync and things seem to fall in place. Thank you very much.

Users / Re: Media not appearing 14.04 on Second hard drive.
« on: April 25, 2016, 10:24:29 pm »

I think the issue is there there.
my Media driver is mounted under following location.
/home/public/data/other/931.51 GB (sda1) WDC_WD10EADS- [35]/public/data/

in that data folder I have videos, pictures and audio directories with all the media in respectively.
All my videos got populated on Orbiter
All my Songs got populated on Orbiter,
But none of my pictures shows up. I checked attributes to all folders and assigned attribute "Linuxmce Pictures" they all appears on database now as I can see "check sign" under webadmin But they aren't populated on the orbiter. I do not know what else to do.

I added some pictures in /home/publice/data/pictures (on the main hard drive where system is installed ) and they immediately showed up on the orbiter.

This is really frustrating. :o I honestly did not want my media drive to be mounted under /home/public/data/other to begin with because my drive that contains media is already has "Linuxmce directory structure." however the message on the orbiter scared me out when I added the drive so I chose to make everything public, so it got mounted as "other". I knew something would go wrong.
Is there any way I can revert this back?

If not what should I do to get my pictures populated?

I hope I am explaining my case properly.

Thank you. Teju.

My Resolution issue is solved for now. I have done extensive modification to my xorg.conf..

Added bunch of modeline under Section "Monitor" and "Screen" in /etc/X11/xorg.conf file
I used following command to get all modelines that I needed.

gtf 1920 1080 60

here is my xorg.conf looks now and all video playbacks are normal. resolution issue is gone.

cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 304.131  (buildmeister@swio-display-x86-rhel47-07)  Sun Nov  8 22:50:24 PST 2015

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"

Section "Files"

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"

Section "Monitor"
    Identifier     "SyncMaster"
    VendorName     "Samsung"
    ModelName      "2333SW"
    Option         "DPMS"
        Modeline "1920x1080_60.00"  172.80  1920 2040 2248 2576  1080 1081 1084 1118  -HSync +Vsync
        Modeline "1680x1050_60.00"  147.14  1680 1784 1968 2256  1050 1051 1054 1087  -HSync +Vsync
        Modeline "1600x1024_60.00"  136.36  1600 1704 1872 2144  1024 1025 1028 1060  -HSync +Vsync
        Modeline "1440x900_60.00"  106.47  1440 1520 1672 1904  900 901 904 932  -HSync +Vsync
        Modeline "1024x768_60.00"  64.11  1024 1080 1184 1344  768 769 772 795  -HSync +Vsync
        Option   "PreferredMode" "1920x1080_60.00"
        HorizSync       28.0 - 33.0
        VertRefresh     43.0 - 72.0

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
        Option "XvmcUsesTextures" "true"
        Option "renderAccel" "true"
        Option "NoDDCValue"
        Option "UseEDID" "true"
        Option "ExactModeTimingsDVI" "true"
        Option "NoLogo" "true"
        Option "NoBandWidthTest" "true"
        Option "ModeValidation" "NoDFPNativeResolutionCheck, NoEdidMaxPClkCheck, NoMaxPClkCheck, AllowInterlacedModes, AllowNon60HzDFPModes, NoEdidModes"
        Option "DynamicTwinView" "false"
        Option "UseEvents" "true"
        Option "AllowGLXWithComposite" "true"
        Option "AddARGBGLXVisuals" "true"
        Option          "ConnectedMonitor" "DFP"

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "SyncMaster"
    DefaultDepth    24
        SubSection "Display"
                Depth           24
                Modes           "1920x1080" "1680x1050" "1600x1024" "1440x900" "1024x768"
        SubSection "Display"
                Depth           32
                Modes           "1920x1080" "1680x1050" "1600x1024" "1440x900" "1024x768"

        Option "XvmcUsesTextures" "true"
        Option "renderAccel" "true"
        Option "NoDDCValue"
        Option "UseEDID" "true"
        Option "ExactModeTimingsDVI" "true"
        Option "NoLogo" "true"
        Option "NoBandWidthTest" "true"
        Option "ModeValidation" "NoDFPNativeResolutionCheck, NoEdidMaxPClkCheck, NoMaxPClkCheck, AllowInterlacedModes, AllowNon60HzDFPModes, NoEdidModes"
        Option "DynamicTwinView" "false"
        Option "UseEvents" "true"
        Option "AllowGLXWithComposite" "true"
        Option "AddARGBGLXVisuals" "true"
        Option  "TVStandard"    "1080p"

Section "Extensions"
        Option "Composite" "true"
        Option "RENDER" "true"

Section "Module"
        Load "glx"

I now remember that I had to blacklist "nouveau" module in order to have nvidia install. I followed a post and blacklist following modules. Perhaps one of those are responsible why I do not have proper AV wizard. Is it possible?

here are the list of blacklist.conf modules.

blacklist amd76x_edac
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist rivatv
blacklist nvidiafb

Hi Podse...

Did you modify the setup scripts that you had been asked to modify in IRC?

Yes, that is how I was able to install the desire driver. here..

cat /usr/pluto/bin/  =

The security pics should not end up in /usr/pluto/bin but end up in /home/securitypics

That must be system's fault. I know I added camera exactly how it says on wiki. What can I check to confirm?


These are the info from other system where,, Nvidia card runs very smoothly.

uname -a
Linux debian 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-1 (2016-03-06) x86_64 GNU/Linux

dpkg -l | grep nvidia
ii  glx-alternative-nvidia                 0.5.1                                amd64        allows the selection of NVIDIA as GLX provider
ii  libgl1-nvidia-legacy-304xx-glx:amd64   304.131-1                            amd64        NVIDIA binary OpenGL libraries (304xx legacy version)
ii  nvidia-installer-cleanup               20141201+1                           amd64        cleanup after driver installation with the nvidia-installer
ii  nvidia-kernel-common                   20141201+1                           amd64        NVIDIA binary kernel module support files
ii  nvidia-legacy-304xx-alternative        304.131-1                            amd64        allows the selection of NVIDIA as GLX provider
ii  nvidia-legacy-304xx-driver             304.131-1                            amd64        NVIDIA metapackage (304xx legacy version)
ii  nvidia-legacy-304xx-kernel-dkms        304.131-1                            amd64        NVIDIA binary kernel module DKMS source (304xx legacy version)
ii  nvidia-settings-legacy-304xx           304.123-2                            amd64        tool for configuring the NVIDIA graphics driver (304xx legacy version)
ii  nvidia-support                         20141201+1                           amd64        NVIDIA binary graphics driver support files
ii  nvidia-xconfig                         340.46-1                             amd64        X configuration tool for non-free NVIDIA drivers
ii  xserver-xorg-video-nvidia-legacy-304xx 304.131-1                            amd64        NVIDIA binary Xorg driver (304xx legacy version)

xorg.conf from that system.

These information might be irrelevant since other system is 64 bit and LMCE is 32 bit. I don;t know,, hope someone can help here.

Thanks again for looking into this.

Hey guys,,

I am experiencing some issues with my system and unable to resolve despite my efforts. The purpose of the thread is not to complain but to report.
I would try my level best to explain as much as I can.

1.) I have Nvidia 6200 card and as we know it is not supported by latest driver. Therefore I went ahead and installed nvidia-304-131. The system is successfully running however, here are the related issue.
First of all, I was never able to see clearly AVWizard except step 1. as soon as I pick DVI, Resolution, and refresh rates. all rest steps were completely unreadable. I finished AVwizard blindly used my experience for it. having said. I have UI on my screen that is completely off tract. I am attaching the pic.

I may be able to solve the problem with 1.) manually edit xorg.conf 2.) re run AV wizard which I have already tried unsuccessfully. On the same system I sometimes boot into separate desktop (debian KDE) where I use same nvidia driver for same card and the resolution looks perfect on that while for LMCE even on KDE desktop, the card is not at its best.
Third,, I sometimes get error during boot saying "fixing recursive fault but reboot needed" and it hangs up. two third attempt and its boots normally for me.

I believe these all are related to my Nvidia card. and the way driver has installed and also the kernel issue. I would post xorg.conf for both system here so someone can help.

2.) When I play any video file on the LMCE , the picture not at all sync with my monitors resolution. I do not know ,, weather its nvidia again or something with xine player issue.

3.) I have installed a logitech 9000 security camera according to wiki page and it works perfect. however, other day I noticed that my /etc/pluto/bin directory was flooded with .jpg files and I noticed those images were from my camera whenever I accessed security webcam from the orbiter. "is that normal ?" I never seen that happening before unless design has been changed.

Please see the following command outputs, hope that helps.
lspci -vnn | grep VGA -A 12
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: Corp. Device [3842:c297]
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at fe8e0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: nvidia

dpkg -l | grep nvidia
ii  nvidia-304                                 304.131-0ubuntu0.14.04.1                                         i386         NVIDIA legacy binary driver - version 304.131

uname -a
Linux dcerouter 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:31:42 UTC 2014 i686 i686 i686 GNU/Linux

xorg.conf on LMCE
Kern.log  on LMCE


Pages: [1] 2 3 ... 12