Messages

16

Installation issues / Re: Discless MD

« on: July 12, 2008, 05:38:38 pm »

When i got to /tftpboot/pxelinux.cfg/ there is only one file named default there.
I tried adding the code you gave me. And now the MD says:

47.505599> NET: Registered protocol family 17
P-Config: eth1 hardware address 00:1f:c6:3b:be:80 mtu 1500 DHCP RARP
48.306957: r8169: eth1: link up
P-Config: eth0 hardware address 00:50:04:99:2b:05 mtu 1500 DHCP RARP
48.309782> eth0: Setting half-duplex.

This is the last 5 lines the MD displayes when i try to boot from LAN.
I can let the PC on for hour without anything happening. :/

17

Installation issues / Re: Discless MD

« on: July 12, 2008, 10:46:11 am »

Yes. Two NICs in the Core. One internal on the Motherboard, and one "external" PCI. And this workes

18

Installation issues / Re: Discless MD

« on: July 12, 2008, 12:16:31 am »

Hmm. I think we talk about to different things now? Are you talking about the Core ? Because, the Core workes just fine. DHCP runs with no problem. I got a pc (with WinXP) connected to the Core also, and the pc is getting a IP from the DHCP from Core. No problems there.

The one im trying to install only MD on, is a thin client in my living room with no HDD connected.

Or is it me who got it wrong Forgive my questions.

I really appreciate you taking your time to help me!!

19

Installation issues / Re: Discless MD

« on: July 11, 2008, 11:15:59 pm »

Well. I have now changed the Ethernet card, but it still won`t work. I have tried disabling the internal motherboard card. But when I do so. I can`t select the other ethernet card to boot from. Its just CDROM, HDD and DISABLE and can choose from. Hmm..
Do you kno what card is working fine ? Maby I can buy a new one.

20

Installation issues / Re: Discless MD

« on: July 11, 2008, 01:02:13 pm »

Thanks tschak909! I will try this when I get home from work!

21

Installation issues / Discless MD

« on: July 10, 2008, 09:28:55 pm »

Hi everybody! i`m pritty much new to LinuxMCE. But I love it, and I`am REALLY trying to get it working.

In my house, I have installed one Core server that is running in my basement. The Core is running really nice, with 2 NIC and everything is working. NOW, I want to set up an "Thin client" in my living room. By booting it from LAN (DHCP). I have used my WHOLE day trying to figure this out. But everytime I try to boot from LAN I get this message at the end. "41.850137> r8169: eth0: link up" And then, after about 15 minuts the screen just go black.

It seems like the PC is getting a connection from the Core. Because there is no errors on the IP at the beginning.
Do anybody have a suggestion for me ? Do I have do "preconfigure" something in my Core to get this working ?

Thanks!

Ps: Sorry about my English.