Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - trimble

Pages: [1] 2 3
1
Users / Re: Remotely Access Music?
« on: December 03, 2009, 09:58:24 pm »
Cool, thanks for the feedback. I have now disabled my system's remote access capability and am configuring icecast2 and ices on the core to stream my music files.

Cheers,
Mark

2
Users / Remotely Access Music?
« on: December 02, 2009, 08:28:40 pm »
I am running 0710 and can successfully access my system from outside my home using a Web Orbiter, but have thus far not been able to play/stream music or videos. Is this possible?

Regards,
Mark

3
Users / Re: UI1 Video Catalog Customization
« on: November 04, 2009, 04:42:29 pm »
That's good info, thanks. I'm running 0710 now, but am building a test server now to try 0810 on.

Would you happen to know if there an upgrade path anticipated from the current 0810 Beta to the final release? If so, I may just take the plunge and start using 0810 full time. My whole family runs on LMCE and, for everybody's sanity, I want to minimize the number of clean reinstalls we go through.

Regards,
Mark

4
Users / UI1 Video Catalog Customization
« on: November 03, 2009, 02:21:47 am »
In general, I find it more convenient to playback videos recorded using MythTV from the standard LMCE Video catalog. However, as the MythTV files do not have cover art, only the title of the program appears on the main catalog screen and, as many episodes of the same show may be listed, this can become confusing as there is no way to identify which episode is which. I use UI1 and was wondering how one would go about showing the episode title or file creation date along with the program title on the main Video catalog page. Displaying this additional information would be a great benefit.

Regards,
Mark

5
Users / Firewire Camcorder as Security Camera
« on: October 19, 2009, 03:45:16 pm »
I have an old Sony camcorder with a firewire interface that I would like to use as a security camera. Provided it's possible to stream DV across the camera's firewire port, should LMCE be able to accept and display this video stream?

6
Cool. I'll check out that MD reboot option. Thanks. :-)

7
Yes, this approach does indeed appear to be a dead end.

The solution that I've settled on for now is simply to install Windows on one of my MDs and, when I want to watch a Netflix on-demand movie, just restart the box and preempt the netboot to load XP from the local hard drive instead.

Ultimately I plan to get a Roku box. That's the real solution.

Cheers,
Mark

8
I have a partial solution, which may ultimately work or prove to be a dead end. I need some advice:

I have an XP box which I can view Netflix on-demand movies on. With a gigabit connection to my core, I can use VNC to remote into it and also watch Netflix on-demand movies. Trouble is, the video is choppy and there's no audio.

As, of course, my MDs play movies all the time streamed across my LAN, I'm not sure why the Netflix video is choppy. I'm hoping there's a VNC setting to improve throughput. Not sure about the audio yet.

Any help appreciated.

Regards,
Mark

9
Users / MD CPU and RAM Utilization
« on: July 11, 2009, 05:43:39 am »
I am interested in doing some video editing and was wondering if an application like Kino were running "on" a diskless MD, would Kino be using the MD's or the Core's CPU and RAM?

Regards,
Mark

10
Users / Media Playback Routing
« on: June 27, 2009, 09:02:32 pm »
I'd like to minimize network traffic in my home and have a general question about how media are served-up to MDs. Does all media get routed through the Core when played back? I'm wondering because all of my MDs have large internal hard drives which are used by LMCE for storage. If files that reside on an MD's own hard drive(s) stay off the network when played back by that MD, that would be very cool and would prompt me to locate media primarily used by a particular MD on that MD, rather than on the Core.

Regards,
Mark

11
Users / Re: How to Add Media Director Hard Disk Device
« on: June 22, 2009, 05:13:05 pm »
That was the problem. The MD was running an AMD64 image; once it was changed back to i386, xfsprogs installed without issues and I was able to run mkfs.xfs /dev/sda1 to format the partition. LMCE has now recognized and is managing the drive. Thanks for the help!

Cheers,
Mark

12
Users / Re: How to Add Media Director Hard Disk Device
« on: June 21, 2009, 10:30:14 pm »
Running a straight "apt-get update" and "sudo apt-get update" had no effect on the error, so I went into the MD's sources.list and made the following changes:

FROM
deb http://archive.ubuntu.com/ubuntu/ gutsy main restricted multiverse universe
deb http://archive.ubuntu.com/ubuntu/ gutsy-security main restricted multiverse universe
deb http://archive.ubuntu.com/ubuntu/ gutsy-updates main restricted multiverse universe

TO
deb http://old-releases.ubuntu.com/ubuntu/ gutsy main restricted multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ gutsy-security main restricted multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ gutsy-updates main restricted multiverse universe

I reran apt-get update on the MD and saw a bunch of updates load.

However, upon running "sudo apt-get install xfsprogs" I was greeted with a boatload (pages, literally) of unmet dependencies and offered the option of running "apt-get -f install" to correct. I then ran "sudo apt-get -f install xfsprogs" just to see what would happen and I again was presented with pages of packages that were going to be updated upon pressing Enter.

I didn't. I know it's "just" a diskless MD, but the wholesale upgrade of just about every package on the MD to install a package that loaded without incident on the core seems suspicious.

However, now that I think of it, there *is* a difference between the LMCE systems on the core and the MD. While I don't know much about this stuff, the core is a P4 running a standard 386 package set and the MD is an Intel Dual Core which I believe is running an AMD (kernel?) which came up as part of the MD's diskless autoconfiguration. Perhaps this explains the different behavior vis-a-vis the xfsprogs package on the core and the MD?

Mark

13
Users / Re: How to Add Media Director Hard Disk Device
« on: June 21, 2009, 09:05:56 pm »
Thanks Thom.

I'm making progress. I checked dmesg and found out the drive is identified as sda. I ran fdisk /dev/sda and now have a partition sda1.

However, attempting to run either "apt-get install xfsprogs" or "sudo apt-get install xfsprogs" at the MD produced the error "E: Couldn't find package xfsprogs".

I ran "sudo apt-get install xfsprogs" at the core and it installed fine and mkfs.xfs is now in the core's /sbin, but this is not visible on the MD.

I checked the apt sources.list on the MD and it appears identical to the core's, so I'm guessing there's something blocking installs on MDs. I tried rebuilding the MD image, thinking this would replicate the current core package set on the MD, but it didn't.

What should I do to install xfsprogs on the MD?

Mark

14
Users / How to Add Media Director Hard Disk Device
« on: June 21, 2009, 04:13:28 am »
I've added a new 1TB SATA hard disk to one of my Media Directors and could use some assistance in how to get it formated.

The FAQ wiki (http://wiki.linuxmce.org/index.php/Frequently_Asked_Questions#How_should_I_format_additional_hard_drives.3F) provides the command to properly format partition the drive for media files:

Code: [Select]
mke2fs -b 4096 -m 1 -j /dev/whatever
where "whatever" is the hard disk in question (hda1, sda1, etc.) and this is what I could use some help with in creating. The 1TB SATA disk on this Media Director is recognized in the Media Directors Systems Settings: Disk & Filesystems. I'm not sure whether this disk device should be (hd, sd, hd1, sd1, hda1, sda1, etc.) or how to actually create the device.

Any help appreciated.

Regards,
Mark

15
Users / Re: UI1 Video Controls Blank
« on: June 01, 2009, 01:09:12 am »
Well, the problem is now resolved, though I'm still not sure of the problem in the first place; though I'm guessing some of the UI1 screens didn't get built properly during the media director's initial setup.

The problem was fixed by running AVWizard and switching to UI2. After a session of running UI2, I ran AVWizard again and switched back to UI1. This time everything is working fine.

Cheers,
Mark

Pages: [1] 2 3