Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - maverick0815

Pages: 1 2 3 [4] 5 6 ... 58
46
Installation issues / Lmce-core update error
« on: May 15, 2017, 07:57:14 am »
I have just installed the latest updates ans lmce-core produces an error
Quote
dcerouter_1047595:/home/linuxmce# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up lmce-core (2.0.0.47.201705131307+14f85ee9) ...
Mo 15. Mai 07:52:50 CEST 2017 - Updating /etc/pluto.conf (if required)
/var/lib/dpkg/info/lmce-core.postinst: line 99: Configure_NTP_Server: command not found
dpkg: error processing package lmce-core (--configure):
 subprocess installed post-installation script returned error exit status 127
Errors were encountered while processing:
 lmce-core
E: Sub-process /usr/bin/dpkg returned an error code (1)

47
Installation issues / Re: Installing Diskless MDs
« on: April 25, 2017, 07:40:28 pm »
thank you very much for taking the time for the heads up! That sounds great.

48
Installation issues / Re: Installing Diskless MDs
« on: April 20, 2017, 11:19:51 am »
No sweat...I still remember Rule #1

49
Installation issues / Re: Installing Diskless MDs
« on: April 19, 2017, 11:03:12 pm »
Would I be able to install one manually?

50
Installation issues / Re: Installing Diskless MDs
« on: April 09, 2017, 05:48:35 am »
That Sounds plausible, since the Setup was working up to the point when the graphics driver was being compiled

51
Installation issues / Re: Installing Diskless MDs
« on: April 08, 2017, 04:27:05 pm »
Unfortunately it does not work. I think it may have something to do with the "dangling symlink"?
Here are the contents of the respective folder
/usr/pluto/diskless/86/boot
Quote
total 44192
-rw-r--r-- 1 root root  1214709 Jun 28  2016 abi-3.16.0-77-generic
-rw-r--r-- 1 root root   176220 Jun 28  2016 config-3.16.0-77-generic
lrwxrwxrwx 1 root root       56 Apr  2 19:51 initrd.img -> /usr/pluto/diskless/86/boot/initrd.img-3.16.0-77-generic
-rw-r--r-- 1 root root 34468040 Apr  8 13:59 initrd.img-3.16.0-77-generic
-rw-r--r-- 1 root root   176500 Mär 12  2014 memtest86+.bin
-rw-r--r-- 1 root root   178176 Mär 12  2014 memtest86+.elf
-rw-r--r-- 1 root root   178680 Mär 12  2014 memtest86+_multiboot.bin
-rw-r--r-- 1 root root      843 Apr  3 21:30 pastebinit
-rw-r--r-- 1 root root  2795312 Jun 28  2016 System.map-3.16.0-77-generic
lrwxrwxrwx 1 root root       53 Apr  2 19:52 vmlinuz -> /usr/pluto/diskless/86/boot/vmlinuz-3.16.0-77-generic
-rw-r--r-- 1 root root  6034368 Jun 28  2016 vmlinuz-3.16.0-77-generic
/usr/pluto/diskless/86
Quote
total 80
drwxr-xr-x   2 root root  4096 Apr  2 13:51 bin
drwxr-xr-x   2 root root  4096 Apr  8 13:59 boot
drwxr-xr-x   3 root root  4096 Apr  2 13:50 dev
drwxr-xr-x 144 root root 12288 Apr  2 19:15 etc
drwxr-xr-x   4 root root  4096 Apr  2 13:48 home
lrwxrwxrwx   1 root root    33 Apr  8 13:59 initrd.img -> boot/initrd.img-3.16.0-77-generic
drwxr-xr-x  22 root root  4096 Apr  2 19:09 lib
drwxr-xr-x   2 root root  4096 Apr  2 13:48 media
drwxr-xr-x   3 root root  4096 Apr  2 13:40 mnt
drwxr-xr-x   2 root root  4096 Apr  2 13:33 opt
drwxr-xr-x   2 root root  4096 Apr 11  2014 proc
drwx------   6 root root  4096 Apr  4 18:58 root
drwxr-xr-x  14 root root  4096 Apr  8 13:59 run
drwxr-xr-x   2 root root  4096 Apr  2 19:10 sbin
drwxr-xr-x   2 root root  4096 Apr  2 13:33 srv
drwxr-xr-x   2 root root  4096 Mär 13  2014 sys
drwxrwxrwt   5 root root  4096 Apr  8 13:59 tmp
drwxr-xr-x  11 root root  4096 Apr  2 13:34 usr
drwxr-xr-x  14 root root  4096 Apr  2 13:48 var
lrwxrwxrwx   1 root root    30 Apr  8 13:59 vmlinuz -> boot/vmlinuz-3.16.0-77-generic
/tftboot/86
Quote
total 0
lrwxrwxrwx 1 root root 33 Apr  2 19:06 initrd.img -> /usr/pluto/diskless/86/initrd.img
lrwxrwxrwx 1 root root 30 Apr  2 19:06 vmlinuz -> /usr/pluto/diskless/86/vmlinuz

52
Installation issues / Re: Installing Diskless MDs
« on: April 08, 2017, 02:01:23 pm »
Sorry for the delay. I did my googling and this is the outcome so far:
Quote
login as: linuxmce
linuxmce@dcerouter's password:
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-115-generic i686)

 *
linuxmce@dcerouter:~$ sudo su
[sudo] password for linuxmce:
dcerouter_1047595:/home/linuxmce# mount --bind /proc /usr/pluto/diskless/86/proc
dcerouter_1047595:/home/linuxmce# mount --bind /dev /usr/pluto/diskless/86/dev
dcerouter_1047595:/home/linuxmce# mount --bind /sys /usr/pluto/diskless/86/sys
dcerouter_1047595:/home/linuxmce# chroot /usr/pluto/diskless/86
root@dcerouter:/# apt-get install --reinstall linux-image-3.16.0-77-generic
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libglamor0 libllvm3.4
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
Need to get 0 B/15.6 MB of archives.
After this operation, 0 B of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  linux-image-3.16.0-77-generic
Authentication warning overridden.
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = (unset),
        LC_ALL = (unset),
        LC_TIME = "de_DE.UTF-8",
        LC_MONETARY = "de_DE.UTF-8",
        LC_ADDRESS = "de_DE.UTF-8",
        LC_TELEPHONE = "de_DE.UTF-8",
        LC_NAME = "de_DE.UTF-8",
        LC_MEASUREMENT = "de_DE.UTF-8",
        LC_IDENTIFICATION = "de_DE.UTF-8",
        LC_NUMERIC = "de_DE.UTF-8",
        LC_PAPER = "de_DE.UTF-8",
        LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
E: Can not write log (Is /dev/pts mounted?) - openpty (2: No such file or directory)
(Reading database ... 116678 files and directories currently installed.)
Preparing to unpack .../linux-image-3.16.0-77-generic_3.16.0-77.99~14.04.1_i386.deb ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Done.
Unpacking linux-image-3.16.0-77-generic (3.16.0-77.99~14.04.1) over (3.16.0-77.99~14.04.1) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
Setting up linux-image-3.16.0-77-generic (3.16.0-77.99~14.04.1) ...
Running depmod.
update-initramfs: deferring update (hook will be called later)
Not updating initrd symbolic links since we are being updated/reinstalled
(3.16.0-77.99~14.04.1 was configured last, according to dpkg)
Not updating image symbolic links since we are being updated/reinstalled
(3.16.0-77.99~14.04.1 was configured last, according to dpkg)
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/dkms 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
update-initramfs: Generating /boot/initrd.img-3.16.0-77-generic
cryptsetup: WARNING: failed to detect canonical device of 192.168.80.1:/usr/pluto/diskless/86
cryptsetup: WARNING: could not determine root device from /etc/fstab
W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
run-parts: executing /etc/kernel/postinst.d/pm-utils 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/update-symlinks 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
chmod: cannot operate on dangling symlink '/boot/initrd.img'
chmod: cannot operate on dangling symlink '/boot/vmlinuz'
chmod: cannot operate on dangling symlink '/boot/initrd.img'
chmod: cannot operate on dangling symlink '/boot/vmlinuz'
/ /
/
root@dcerouter:/#


53
Installation issues / Re: Installing Diskless MDs
« on: April 04, 2017, 07:03:53 pm »
What happened is this and the result is the same
Quote
dcerouter_1047595:/home/linuxmce# chroot /usr/pluto/diskless/86
root@dcerouter:/# apt-get install --reinstall linux-image-3.16.0-77-generic
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = (unset),
        LC_ALL = (unset),
        LC_TIME = "de_DE.UTF-8",
        LC_MONETARY = "de_DE.UTF-8",
        LC_ADDRESS = "de_DE.UTF-8",
        LC_TELEPHONE = "de_DE.UTF-8",
        LC_NAME = "de_DE.UTF-8",
        LC_MEASUREMENT = "de_DE.UTF-8",
        LC_IDENTIFICATION = "de_DE.UTF-8",
        LC_NUMERIC = "de_DE.UTF-8",
        LC_PAPER = "de_DE.UTF-8",
        LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
grep: /proc/cpuinfo: No such file or directory
This kernel does not support a non-PAE CPU.
dpkg: error processing archive /var/cache/apt/archives/linux-image-3.16.0-77-generic_3.16.0-77.99~14.04.1_i386.deb (--unpack):
 subprocess new pre-installation script returned error exit status 1
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
Errors were encountered while processing:
 /var/cache/apt/archives/linux-image-3.16.0-77-generic_3.16.0-77.99~14.04.1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@dcerouter:/#

54
Installation issues / Re: Installing Diskless MDs
« on: April 03, 2017, 09:37:28 pm »
I don't know...1&1 seemed to have some issues with me yesterday
here ist the content of /usr/pluto/diskless/86/boot
Quote
total 44188
-rw-r--r-- 1 root root  1214709 Jun 28  2016 abi-3.16.0-77-generic
-rw-r--r-- 1 root root   176220 Jun 28  2016 config-3.16.0-77-generic
lrwxrwxrwx 1 root root       56 Apr  2 19:51 initrd.img -> /usr/pluto/diskless/86/boot/initrd.img-3.16.0-77-generic
-rw-r--r-- 1 root root 34468576 Apr  2 19:14 initrd.img-3.16.0-77-generic
-rw-r--r-- 1 root root   176500 Mär 12  2014 memtest86+.bin
-rw-r--r-- 1 root root   178176 Mär 12  2014 memtest86+.elf
-rw-r--r-- 1 root root   178680 Mär 12  2014 memtest86+_multiboot.bin
-rw-r--r-- 1 root root      843 Apr  3 21:30 pastebinit
-rw-r--r-- 1 root root  2795312 Jun 28  2016 System.map-3.16.0-77-generic
lrwxrwxrwx 1 root root       53 Apr  2 19:52 vmlinuz -> /usr/pluto/diskless/86/boot/vmlinuz-3.16.0-77-generic
-rw-r--r-- 1 root root  6034368 Jun 28  2016 vmlinuz-3.16.0-77-generic
this is diskless/86
Quote
total 80
drwxr-xr-x   2 root root  4096 Apr  2 13:51 bin
drwxr-xr-x   2 root root  4096 Apr  3 21:30 boot
drwxr-xr-x   3 root root  4096 Apr  2 13:50 dev
drwxr-xr-x 144 root root 12288 Apr  2 19:15 etc
drwxr-xr-x   4 root root  4096 Apr  2 13:48 home
lrwxrwxrwx   1 root root    33 Apr  2 13:37 initrd.img -> boot/initrd.img-3.16.0-77-generic
drwxr-xr-x  22 root root  4096 Apr  2 19:09 lib
drwxr-xr-x   2 root root  4096 Apr  2 13:48 media
drwxr-xr-x   3 root root  4096 Apr  2 13:40 mnt
drwxr-xr-x   2 root root  4096 Apr  2 13:33 opt
drwxr-xr-x   2 root root  4096 Apr 11  2014 proc
drwx------   6 root root  4096 Apr  2 13:43 root
drwxr-xr-x  14 root root  4096 Apr  2 13:48 run
drwxr-xr-x   2 root root  4096 Apr  2 19:10 sbin
drwxr-xr-x   2 root root  4096 Apr  2 13:33 srv
drwxr-xr-x   2 root root  4096 Mär 13  2014 sys
drwxrwxrwt   5 root root  4096 Apr  2 19:14 tmp
drwxr-xr-x  11 root root  4096 Apr  2 13:34 usr
drwxr-xr-x  14 root root  4096 Apr  2 13:48 var
lrwxrwxrwx   1 root root    30 Apr  2 13:37 vmlinuz -> boot/vmlinuz-3.16.0-77-generic
this is tftpboot/86
Quote
total 0
lrwxrwxrwx 1 root root 33 Apr  2 19:06 initrd.img -> /usr/pluto/diskless/86/initrd.img
lrwxrwxrwx 1 root root 30 Apr  2 19:06 vmlinuz -> /usr/pluto/diskless/86/vmlinuz

so far so good...what logs do I need to check?

55
Installation issues / Re: Installing Diskless MDs
« on: April 02, 2017, 08:48:54 pm »
Unfortunately its not that easy. I tried deleting the orbiter and reinstall it. It boots up fine the first time, but then installs the nvidia-drivers and reboots. That is when the shit hits the fan. I followed the symlinks from /tftpboot down to the orbiter...none of them are broken. I assume there are supposed to be only two links in /tftpboot/86/ one for vmlinuz and one for initrd.img. The kernel-version on the core and the md are different- I don't know if that is of significance.
Other than that, I have no idea, why 86/initrd.img not found is being reported. I also verified the permissions and that seems to be okay too.
I'm stumped

56
Installation issues / Re: Installing Diskless MDs
« on: April 02, 2017, 02:40:24 pm »
guys, I have quite a similar problem. After performing an update on my md (asrock ion330) it wouldn't boot anymore. So I too rebuilt the image, which resultet in "45/initrd.img" not being found.
So I rans "usr/pluto/bin/Diskless_CreateTBZ.sh", which ran without detecting any issues, but it seemed quite fast...usually it takes around an hour- this was done after 25 Minutes
I deleted the MD and let it create a new one, which gave me "77/initrd.img" not found.
So what do I do now? Please advise.

Running on 12.04
Cheers
Mario


-------------
I found out that initrd.img points to initrd.img-3.13.0-105-generic and vmlinuz to vmlinuz-3.13.0-105-generic
for both files there ias however a 3.16.0-77 present

57
Users / Re: Filename View in Orbiter
« on: December 30, 2016, 01:46:08 pm »
it seems redoing the database did the trick, fileview is available again

58
Users / Re: Filename View in Orbiter
« on: December 30, 2016, 12:30:54 pm »
ok, I reinstalled the database. However I got an error at the end:
Quote
Error 1146 (42S02) at line 1: Table 'pluto_main.Attribute' doesn't exist
Is this something to be concerned about?`
Anyway, I will see, what will happen now.
Thanks so far!

59
Users / Re: Filename View in Orbiter
« on: December 29, 2016, 06:27:00 pm »
thanks, I will give this a try and report back...perhaps even within this year :-)

60
Users / Re: Filename View in Orbiter
« on: December 29, 2016, 12:46:29 pm »
well, I can manually start and stop the updatemediadaemon. I checked the log and the connection error still occurs.
The log also shows me a lot of double attributes. I don't think that is right.
Also in Orbiter, when I select a TV-Show, though they are all tagged via autotagger, the listing there is not consistent. Lets say there are 8 Seasons of a TV-Show. Three seasons appear in a common container, the others are listed separately and the episodes are mostly out of order there. So its quite a challenges to figure out, how to find the next one to watch.
All of this happened since I had this crash. So I was thinking if its either possible to drop and rebuild the database for my media, or if I will just scrap this install and make a new one.

Pages: 1 2 3 [4] 5 6 ... 58