Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - maverick0815

Pages: [1] 2 3 ... 55
1
Users / Re: Anyone running qorbiter on nougat?
« on: May 24, 2017, 08:01:38 pm »
What am i going to do with this package?

2
Users / Anyone running qorbiter on nougat?
« on: May 24, 2017, 06:28:45 pm »
I am and I cannot browse any media on it. My tablet with kitkat is fine...but not for long. I wonder if its a problem unique to my setup or a general one.

3
Installation issues / Re: Lmce-core update error
« on: May 16, 2017, 07:09:04 pm »
apt-get upgrade was working...everything is peachy :-)
Thank you very much!

4
Installation issues / Re: Lmce-core update error
« on: May 16, 2017, 03:58:36 pm »
:-) I understand that.
I do an apt-get update and then apt-get dist-upgrade, just as it states on the wiki-page

5
Installation issues / Re: Lmce-core update error
« on: May 16, 2017, 06:19:28 am »
I always do a apt-get update before the dist-upgrade.

6
Installation issues / Re: Lmce-core update error
« on: May 15, 2017, 09:54:01 pm »
I do think its better to go through the paces...this usually brings about a solid solution, so here is the result:
Quote
login as: linuxmce
linuxmce@dcerouter's password:
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-117-generic i686)

 * Documentation:  https://help.ubuntu.com/

*** System restart required ***
Last login: Mon May 15 19:04:34 2017 from 192.168.80.196
linuxmce@dcerouter:~$ sudo su
[sudo] password for linuxmce:
dcerouter_1047595:/home/linuxmce# apt-get install lmce-core lmce-install-scripts
Reading package lists... Done
Building dependency tree
Reading state information... Done
lmce-core is already the newest version.
lmce-install-scripts is already the newest version.
lmce-install-scripts set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up lmce-core (2.0.0.47.201705131307+14f85ee9) ...
Mo 15. Mai 21:51:28 CEST 2017 - Updating /etc/pluto.conf (if required)
/var/lib/dpkg/info/lmce-core.postinst: line 99: Configure_NTP_Server: command no                                                                                                                                  t found
dpkg: error processing package lmce-core (--configure):
 subprocess installed post-installation script returned error exit status 127
Errors were encountered while processing:
 lmce-core
E: Sub-process /usr/bin/dpkg returned an error code (1)
dcerouter_1047595:/home/linuxmce#
it says above "System restart required" but I'd hold off on that until you tell me its okay to do so.

7
Installation issues / Re: Lmce-core update error
« on: May 15, 2017, 07:07:00 pm »
There you go
Quote
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-117-generic i686)

 * Documentation:  https://help.ubuntu.com/

0 packages can be updated.
0 updates are security updates.

New release '16.04.2 LTS' available.
Run 'do-release-upgrade' to upgrade to it.

Last login: Mon May 15 07:42:55 2017 from 192.168.80.196
linuxmce@dcerouter:~$ sudo su
[sudo] password for linuxmce:
dcerouter_1047595:/home/linuxmce# dpkg -l | grep lmce | grep script
ii  lmce-advanced-ip-camera               2.0.0.47.201702201459+325cc736             i386         <insert up to 60 chars description>
ii  lmce-autotagger                       2.0.0.47.201609172308+325de35d             i386         <insert up to 60 chars description>
ii  lmce-cec-adaptor                      2.0.0.47.15121131752                       i386         <insert up to 60 chars description>
iF  lmce-core                             2.0.0.47.201705131307+14f85ee9             i386         <insert up to 60 chars description>
ii  lmce-diskless-tools                   2.0.0.47.201611272017+a7c10426             i386         <insert up to 60 chars description>
ii  lmce-game-db                          2.0.0.47.16010131782                       i386         <insert up to 60 chars description>
ii  lmce-hybrid                           2.0.0.47.15121531757                       i386         <insert up to 60 chars description>
ii  lmce-install-scripts                  2.0.0.47.201602141633+a332f49a             i386         <insert up to 60 chars description>
ii  lmce-launch-manager                   2.0.0.47.201602240724+a84db86f             i386         <insert up to 60 chars description>
ii  lmce-linux-igd                        2.0.0.47.15121131752                       i386         <insert up to 60 chars description>
ii  lmce-md-meta                          2.0.0.47.201705131307+14f85ee9             i386         <insert up to 60 chars description>
ii  lmce-mediatomb                        2.0.0.47.15121131752                       i386         <insert up to 60 chars description>
ii  lmce-nbd-client-wrapper               2.0.0.47.15121131752                       i386         <insert up to 60 chars description>
ii  lmce-qmediaplayer-plugin              2.0.0.47.15121131752                       i386         <insert up to 60 chars description>
ii  lmce-qorbiter-android                 2.0.0.47.201603251446+a1c0f6ea             i386         <insert up to 60 chars description>
ii  lmce-squeezeslave                     2.0.0.47.15121131752                       i386         <insert up to 60 chars description>
ii  lmce-usb-gamepad                      2.0.0.47.15121131752                       i386         <insert up to 60 chars description>
ii  lmce-weather                          2.0.0.47.15121131752                       i386         <insert up to 60 chars description>
ii  lmce-weather-plugin                   2.0.0.47.15121131752                       i386         <insert up to 60 chars description>
ii  lmce-windowutils                      2.0.0.47.16010131782                       i386         <insert up to 60 chars description>
ii  lmce-zfs-support                      2.0.0.47.201705131307+14f85ee9             i386         <insert up to 60 chars description>
dcerouter_1047595:/home/linuxmce#

so far no hotfix is besser here

8
Installation issues / Lmce-core update error
« on: May 15, 2017, 07:57:14 am »
I have just installed the latest updates ans lmce-core produces an error
Quote
dcerouter_1047595:/home/linuxmce# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up lmce-core (2.0.0.47.201705131307+14f85ee9) ...
Mo 15. Mai 07:52:50 CEST 2017 - Updating /etc/pluto.conf (if required)
/var/lib/dpkg/info/lmce-core.postinst: line 99: Configure_NTP_Server: command not found
dpkg: error processing package lmce-core (--configure):
 subprocess installed post-installation script returned error exit status 127
Errors were encountered while processing:
 lmce-core
E: Sub-process /usr/bin/dpkg returned an error code (1)

9
Installation issues / Re: Installing Diskless MDs
« on: April 25, 2017, 07:40:28 pm »
thank you very much for taking the time for the heads up! That sounds great.

10
Installation issues / Re: Installing Diskless MDs
« on: April 20, 2017, 11:19:51 am »
No sweat...I still remember Rule #1

11
Installation issues / Re: Installing Diskless MDs
« on: April 19, 2017, 11:03:12 pm »
Would I be able to install one manually?

12
Installation issues / Re: Installing Diskless MDs
« on: April 09, 2017, 05:48:35 am »
That Sounds plausible, since the Setup was working up to the point when the graphics driver was being compiled

13
Installation issues / Re: Installing Diskless MDs
« on: April 08, 2017, 04:27:05 pm »
Unfortunately it does not work. I think it may have something to do with the "dangling symlink"?
Here are the contents of the respective folder
/usr/pluto/diskless/86/boot
Quote
total 44192
-rw-r--r-- 1 root root  1214709 Jun 28  2016 abi-3.16.0-77-generic
-rw-r--r-- 1 root root   176220 Jun 28  2016 config-3.16.0-77-generic
lrwxrwxrwx 1 root root       56 Apr  2 19:51 initrd.img -> /usr/pluto/diskless/86/boot/initrd.img-3.16.0-77-generic
-rw-r--r-- 1 root root 34468040 Apr  8 13:59 initrd.img-3.16.0-77-generic
-rw-r--r-- 1 root root   176500 Mär 12  2014 memtest86+.bin
-rw-r--r-- 1 root root   178176 Mär 12  2014 memtest86+.elf
-rw-r--r-- 1 root root   178680 Mär 12  2014 memtest86+_multiboot.bin
-rw-r--r-- 1 root root      843 Apr  3 21:30 pastebinit
-rw-r--r-- 1 root root  2795312 Jun 28  2016 System.map-3.16.0-77-generic
lrwxrwxrwx 1 root root       53 Apr  2 19:52 vmlinuz -> /usr/pluto/diskless/86/boot/vmlinuz-3.16.0-77-generic
-rw-r--r-- 1 root root  6034368 Jun 28  2016 vmlinuz-3.16.0-77-generic
/usr/pluto/diskless/86
Quote
total 80
drwxr-xr-x   2 root root  4096 Apr  2 13:51 bin
drwxr-xr-x   2 root root  4096 Apr  8 13:59 boot
drwxr-xr-x   3 root root  4096 Apr  2 13:50 dev
drwxr-xr-x 144 root root 12288 Apr  2 19:15 etc
drwxr-xr-x   4 root root  4096 Apr  2 13:48 home
lrwxrwxrwx   1 root root    33 Apr  8 13:59 initrd.img -> boot/initrd.img-3.16.0-77-generic
drwxr-xr-x  22 root root  4096 Apr  2 19:09 lib
drwxr-xr-x   2 root root  4096 Apr  2 13:48 media
drwxr-xr-x   3 root root  4096 Apr  2 13:40 mnt
drwxr-xr-x   2 root root  4096 Apr  2 13:33 opt
drwxr-xr-x   2 root root  4096 Apr 11  2014 proc
drwx------   6 root root  4096 Apr  4 18:58 root
drwxr-xr-x  14 root root  4096 Apr  8 13:59 run
drwxr-xr-x   2 root root  4096 Apr  2 19:10 sbin
drwxr-xr-x   2 root root  4096 Apr  2 13:33 srv
drwxr-xr-x   2 root root  4096 Mär 13  2014 sys
drwxrwxrwt   5 root root  4096 Apr  8 13:59 tmp
drwxr-xr-x  11 root root  4096 Apr  2 13:34 usr
drwxr-xr-x  14 root root  4096 Apr  2 13:48 var
lrwxrwxrwx   1 root root    30 Apr  8 13:59 vmlinuz -> boot/vmlinuz-3.16.0-77-generic
/tftboot/86
Quote
total 0
lrwxrwxrwx 1 root root 33 Apr  2 19:06 initrd.img -> /usr/pluto/diskless/86/initrd.img
lrwxrwxrwx 1 root root 30 Apr  2 19:06 vmlinuz -> /usr/pluto/diskless/86/vmlinuz

14
Installation issues / Re: Installing Diskless MDs
« on: April 08, 2017, 02:01:23 pm »
Sorry for the delay. I did my googling and this is the outcome so far:
Quote
login as: linuxmce
linuxmce@dcerouter's password:
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-115-generic i686)

 *
linuxmce@dcerouter:~$ sudo su
[sudo] password for linuxmce:
dcerouter_1047595:/home/linuxmce# mount --bind /proc /usr/pluto/diskless/86/proc
dcerouter_1047595:/home/linuxmce# mount --bind /dev /usr/pluto/diskless/86/dev
dcerouter_1047595:/home/linuxmce# mount --bind /sys /usr/pluto/diskless/86/sys
dcerouter_1047595:/home/linuxmce# chroot /usr/pluto/diskless/86
root@dcerouter:/# apt-get install --reinstall linux-image-3.16.0-77-generic
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libglamor0 libllvm3.4
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
Need to get 0 B/15.6 MB of archives.
After this operation, 0 B of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  linux-image-3.16.0-77-generic
Authentication warning overridden.
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = (unset),
        LC_ALL = (unset),
        LC_TIME = "de_DE.UTF-8",
        LC_MONETARY = "de_DE.UTF-8",
        LC_ADDRESS = "de_DE.UTF-8",
        LC_TELEPHONE = "de_DE.UTF-8",
        LC_NAME = "de_DE.UTF-8",
        LC_MEASUREMENT = "de_DE.UTF-8",
        LC_IDENTIFICATION = "de_DE.UTF-8",
        LC_NUMERIC = "de_DE.UTF-8",
        LC_PAPER = "de_DE.UTF-8",
        LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
E: Can not write log (Is /dev/pts mounted?) - openpty (2: No such file or directory)
(Reading database ... 116678 files and directories currently installed.)
Preparing to unpack .../linux-image-3.16.0-77-generic_3.16.0-77.99~14.04.1_i386.deb ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Done.
Unpacking linux-image-3.16.0-77-generic (3.16.0-77.99~14.04.1) over (3.16.0-77.99~14.04.1) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
Setting up linux-image-3.16.0-77-generic (3.16.0-77.99~14.04.1) ...
Running depmod.
update-initramfs: deferring update (hook will be called later)
Not updating initrd symbolic links since we are being updated/reinstalled
(3.16.0-77.99~14.04.1 was configured last, according to dpkg)
Not updating image symbolic links since we are being updated/reinstalled
(3.16.0-77.99~14.04.1 was configured last, according to dpkg)
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/dkms 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
update-initramfs: Generating /boot/initrd.img-3.16.0-77-generic
cryptsetup: WARNING: failed to detect canonical device of 192.168.80.1:/usr/pluto/diskless/86
cryptsetup: WARNING: could not determine root device from /etc/fstab
W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
run-parts: executing /etc/kernel/postinst.d/pm-utils 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
run-parts: executing /etc/kernel/postinst.d/update-symlinks 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
chmod: cannot operate on dangling symlink '/boot/initrd.img'
chmod: cannot operate on dangling symlink '/boot/vmlinuz'
chmod: cannot operate on dangling symlink '/boot/initrd.img'
chmod: cannot operate on dangling symlink '/boot/vmlinuz'
/ /
/
root@dcerouter:/#


15
Installation issues / Re: Installing Diskless MDs
« on: April 04, 2017, 07:03:53 pm »
What happened is this and the result is the same
Quote
dcerouter_1047595:/home/linuxmce# chroot /usr/pluto/diskless/86
root@dcerouter:/# apt-get install --reinstall linux-image-3.16.0-77-generic
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = (unset),
        LC_ALL = (unset),
        LC_TIME = "de_DE.UTF-8",
        LC_MONETARY = "de_DE.UTF-8",
        LC_ADDRESS = "de_DE.UTF-8",
        LC_TELEPHONE = "de_DE.UTF-8",
        LC_NAME = "de_DE.UTF-8",
        LC_MEASUREMENT = "de_DE.UTF-8",
        LC_IDENTIFICATION = "de_DE.UTF-8",
        LC_NUMERIC = "de_DE.UTF-8",
        LC_PAPER = "de_DE.UTF-8",
        LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
grep: /proc/cpuinfo: No such file or directory
This kernel does not support a non-PAE CPU.
dpkg: error processing archive /var/cache/apt/archives/linux-image-3.16.0-77-generic_3.16.0-77.99~14.04.1_i386.deb (--unpack):
 subprocess new pre-installation script returned error exit status 1
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.16.0-77-generic /boot/vmlinuz-3.16.0-77-generic
Errors were encountered while processing:
 /var/cache/apt/archives/linux-image-3.16.0-77-generic_3.16.0-77.99~14.04.1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@dcerouter:/#

Pages: [1] 2 3 ... 55