congrats to all that were involved!

I have the same problem with Freenas. I added

Code:

force create mode = 0777
directory mask = 0777

to the Auxiliary parameters of the share.

Not really a proper solution.....

anyone knows a better way to fix this?

I wish I could buy everyone who put work into this a drink.  Ya'll certainly deserve it! 

Just donate and let them get drunk ;-)

I understand you have to make money. Just thought that keeping up to date with the (k)ubuntu releases is a basic thing and you would be more helped by having the LinuxMCE guys focus on other things instead. that's all.

By the way: ever thought of putting a pricetag on some closed improvements you made and see if the linuxmce community is able and willing to pay for it to make it open source? I suppose the main part of your and linuxmce users base are totally different so it would not affect your normal business that much.

Regards,

E.
 

Beside that it is not released as GPL(yet) are there other reasons it is not integrated in LinuxMCE? I would say both projects would go smoother the more they are in sync and can use/help each other. I'd rather see the Linuxmce devs make functional improvements then in staying up to date with updates if that can be arranged differently ;-).

neither functional nor tested.. do you want that feature and volunteer to test it?

thx a lot Hari for implementing it!

Hari,

Is the 3-phase functional and tested? I saw the checkbox in the admin but can't seem to get it to work.

thx!

I haven't been able to set it up properly yet. Don't know what is causing it.

This still seems the case. Anyone an idea how to fix this? I can run apt-get update & upgrade on the core without errors but the diskless create fails.

Somehow xine is not working so I tried to reinstall a MD to see with a fresh install. I installed the sources.list of Murdock ( http://forum.linuxmce.org/index.php?topic=10901.msg75427#msg75427 )

But running /usr/pluto/bin/Diskless_CreateTBZ.sh fails with lots of 404s (see attachment). anyone an idea how to solve it?

afaik all you need is a phase coupler - marmitek.nl might have some.

I the manual it mentions:

If the power line system in your home is 3-phaes, you need to adjust your #4034E to "3-phase" status. That means before you use your #4034E, you need to confirm which status your #4034E is between "1-phase" and "3-phase".

I suppose that status influences the way it functions.

Anyone knows?

I understood from Hari that someone else has done the work for 3 phase integration of PLC Bus. Anyone knows how to configure it so it will work in 3 phase mode?

thx!

Since I did not get a response for more then a week does that mean that nobody knows and I should file a bug ticket?

thx

Thom,

I tried to just add a mapping to test if it would work. However I had no success. I looked in the gyration template and saw that there 120000 was used instead of 100000. I only need to provide a mapping to be able to test it right? Besides the mapping

2,100291=2,73
3,100291=3,73

I tried

2,120291=2,73
3,120291=3,73

and just in case:

2,291=2,73
3,291=3,73

However none showed the menu. The device is detected and installed automatically. I also saw an old post http://forum.linuxmce.org/index.php?topic=8652.60 and I also have that in my log every 4 seconds:
01      05/05/10 21:27:06.843           GenericHIDInterface::DecodeEventInFD: Short read from fd 1 <0xb2588b90

Pressing this button on the pad when running 'sudo evtest /dev/input/event6' gives me:
Event: time 1273088300.879692, type 4 (?), code 4 (?), value 589828
Event: time 1273088300.879703, type 1 (Key), code 291 (TopBtn), value 1
Event: time 1273088300.879711, type 0 (Reset), code 0 (Reset), value 0
Event: time 1273088301.031694, type 4 (?), code 4 (?), value 589828
Event: time 1273088301.031702, type 1 (Key), code 291 (TopBtn), value 0
Event: time 1273088301.031708, type 0 (Reset), code 0 (Reset), value 0

xev gives no output at all (on none of the buttons, neither the joysticks).

Maybe the short read has something to do with it? Or am I doing something else wrong here? hope you can help me out.

thx

Hi,

I wanted to create a template for teh logitech rumbplepad joystick/pad and tried to follow the descriptions here:
http://wiki.linuxmce.org/index.php/Creating_a_Device_Template_for_a_Remote_that_uses_the_kernel_input_subsystem

However with the tail -f /var/log/pluto/XX_LaunchOrbiter.sh.log | grep "GenericHIDInterface" (with hybrid orbiter) I do not get any input when pressing anything. Using evtest however does give input:

# evtest /dev/input/event6
Input driver version is 1.0.0                       
Input device ID: bus 0x3 vendor 0x46d product 0xc218 version 0x110
Input device name: "Logitech Logitech RumblePad 2 USB"           
Supported events:                                                 
  Event type 0 (Reset)                                           
    Event code 0 (Reset)                                         
    Event code 1 (Key)                                           
    Event code 3 (Absolute)                                       
    Event code 4 (?)                                             
  Event type 1 (Key)                                             
    Event code 288 (Trigger)                                     
    Event code 289 (ThumbBtn)                                     
    Event code 290 (ThumbBtn2)                                   
    Event code 291 (TopBtn)                                       
    Event code 292 (TopBtn2)                                     
    Event code 293 (PinkieBtn)                                   
    Event code 294 (BaseBtn)                                     
    Event code 295 (BaseBtn2)                                     
    Event code 296 (BaseBtn3)                                     
    Event code 297 (BaseBtn4)                                     
    Event code 298 (BaseBtn5)                                     
    Event code 299 (BaseBtn6)                                     
  Event type 3 (Absolute)                                         
    Event code 0 (X)                                             
      Value    128                                               
      Min        0                                               
      Max      255                                               
      Flat      15                                               
    Event code 1 (Y)                                             
      Value    127                                               
      Min        0                                               
      Max      255                                               
      Flat      15                                               
    Event code 2 (Z)                                             
      Value    127                                               
      Min        0                                               
      Max      255                                               
      Flat      15                                               
    Event code 5 (Rz)                                             
      Value    127                                               
      Min        0                                               
      Max      255                                               
      Flat      15                                               
    Event code 16 (Hat0X)                                         
      Value      0                                               
      Min       -1                                               
      Max        1                                               
    Event code 17 (Hat0Y)                                         
      Value      0                                               
      Min       -1                                               
      Max        1                                               
  Event type 4 (?)                                               
    Event code 4 (?)                                             
Testing ... (interrupt to exit)                                   
Event: time 1272873951.784059, type 3 (Absolute), code 5 (Rz), value 126
Event: time 1272873951.784085, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873951.792054, type 3 (Absolute), code 2 (Z), value 122
Event: time 1272873951.792063, type 3 (Absolute), code 5 (Rz), value 255
Event: time 1272873951.792076, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.735987, type 3 (Absolute), code 2 (Z), value 126
Event: time 1272873979.736009, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.743991, type 3 (Absolute), code 2 (Z), value 127
Event: time 1272873979.744013, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.751985, type 3 (Absolute), code 2 (Z), value 128
Event: time 1272873979.752005, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.767997, type 3 (Absolute), code 5 (Rz), value 252
Event: time 1272873979.768019, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.775981, type 3 (Absolute), code 2 (Z), value 130
Event: time 1272873979.776001, type 0 (Reset), code 0 (Reset), value 0

any suggestions?

thx