Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Esperanto

Pages: 1 ... 14 15 [16] 17 18 19
226
Users / plcbus 3phase
« on: October 18, 2010, 02:34:24 pm »
I understood from Hari that someone else has done the work for 3 phase integration of PLC Bus. Anyone knows how to configure it so it will work in 3 phase mode?

thx!

227
Developers / Re: creating template for logitech rumblepad
« on: May 10, 2010, 07:32:37 pm »
Since I did not get a response for more then a week does that mean that nobody knows and I should file a bug ticket?

thx

228
Developers / Re: creating template for logitech rumblepad
« on: May 05, 2010, 09:44:41 pm »
Thom,

I tried to just add a mapping to test if it would work. However I had no success. I looked in the gyration template and saw that there 120000 was used instead of 100000. I only need to provide a mapping to be able to test it right? Besides the mapping

2,100291=2,73
3,100291=3,73

I tried

2,120291=2,73
3,120291=3,73

and just in case:

2,291=2,73
3,291=3,73

However none showed the menu. The device is detected and installed automatically. I also saw an old post http://forum.linuxmce.org/index.php?topic=8652.60 and I also have that in my log every 4 seconds:
01      05/05/10 21:27:06.843           GenericHIDInterface::DecodeEventInFD: Short read from fd 1 <0xb2588b90

Pressing this button on the pad when running 'sudo evtest /dev/input/event6' gives me:
Event: time 1273088300.879692, type 4 (?), code 4 (?), value 589828
Event: time 1273088300.879703, type 1 (Key), code 291 (TopBtn), value 1
Event: time 1273088300.879711, type 0 (Reset), code 0 (Reset), value 0
Event: time 1273088301.031694, type 4 (?), code 4 (?), value 589828
Event: time 1273088301.031702, type 1 (Key), code 291 (TopBtn), value 0
Event: time 1273088301.031708, type 0 (Reset), code 0 (Reset), value 0

xev gives no output at all (on none of the buttons, neither the joysticks).

Maybe the short read has something to do with it? Or am I doing something else wrong here? hope you can help me out.

thx

229
Developers / creating template for logitech rumblepad
« on: May 03, 2010, 10:07:20 am »
Hi,

I wanted to create a template for teh logitech rumbplepad joystick/pad and tried to follow the descriptions here:
http://wiki.linuxmce.org/index.php/Creating_a_Device_Template_for_a_Remote_that_uses_the_kernel_input_subsystem

However with the tail -f /var/log/pluto/XX_LaunchOrbiter.sh.log | grep "GenericHIDInterface" (with hybrid orbiter) I do not get any input when pressing anything. Using evtest however does give input:

# evtest /dev/input/event6
Input driver version is 1.0.0                       
Input device ID: bus 0x3 vendor 0x46d product 0xc218 version 0x110
Input device name: "Logitech Logitech RumblePad 2 USB"           
Supported events:                                                 
  Event type 0 (Reset)                                           
    Event code 0 (Reset)                                         
    Event code 1 (Key)                                           
    Event code 3 (Absolute)                                       
    Event code 4 (?)                                             
  Event type 1 (Key)                                             
    Event code 288 (Trigger)                                     
    Event code 289 (ThumbBtn)                                     
    Event code 290 (ThumbBtn2)                                   
    Event code 291 (TopBtn)                                       
    Event code 292 (TopBtn2)                                     
    Event code 293 (PinkieBtn)                                   
    Event code 294 (BaseBtn)                                     
    Event code 295 (BaseBtn2)                                     
    Event code 296 (BaseBtn3)                                     
    Event code 297 (BaseBtn4)                                     
    Event code 298 (BaseBtn5)                                     
    Event code 299 (BaseBtn6)                                     
  Event type 3 (Absolute)                                         
    Event code 0 (X)                                             
      Value    128                                               
      Min        0                                               
      Max      255                                               
      Flat      15                                               
    Event code 1 (Y)                                             
      Value    127                                               
      Min        0                                               
      Max      255                                               
      Flat      15                                               
    Event code 2 (Z)                                             
      Value    127                                               
      Min        0                                               
      Max      255                                               
      Flat      15                                               
    Event code 5 (Rz)                                             
      Value    127                                               
      Min        0                                               
      Max      255                                               
      Flat      15                                               
    Event code 16 (Hat0X)                                         
      Value      0                                               
      Min       -1                                               
      Max        1                                               
    Event code 17 (Hat0Y)                                         
      Value      0                                               
      Min       -1                                               
      Max        1                                               
  Event type 4 (?)                                               
    Event code 4 (?)                                             
Testing ... (interrupt to exit)                                   
Event: time 1272873951.784059, type 3 (Absolute), code 5 (Rz), value 126
Event: time 1272873951.784085, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873951.792054, type 3 (Absolute), code 2 (Z), value 122
Event: time 1272873951.792063, type 3 (Absolute), code 5 (Rz), value 255
Event: time 1272873951.792076, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.735987, type 3 (Absolute), code 2 (Z), value 126
Event: time 1272873979.736009, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.743991, type 3 (Absolute), code 2 (Z), value 127
Event: time 1272873979.744013, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.751985, type 3 (Absolute), code 2 (Z), value 128
Event: time 1272873979.752005, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.767997, type 3 (Absolute), code 5 (Rz), value 252
Event: time 1272873979.768019, type 0 (Reset), code 0 (Reset), value 0 
Event: time 1272873979.775981, type 3 (Absolute), code 2 (Z), value 130
Event: time 1272873979.776001, type 0 (Reset), code 0 (Reset), value 0

any suggestions?

thx

230
Users / Re: DVB Cards info needed for Templates
« on: April 26, 2010, 09:57:42 pm »
Yo Mandingo. On your request =)

keep the pnp commin....

Technotrend
TT-connect S2-3650 CI

sudo v4l2-ctl -n:
Code: [Select]
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : STV06xx
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000000000 ( )
        Status  : 0

sudo lsusb -v
Code: [Select]
Bus 004 Device 007: ID 0b48:300a TechnoTrend AG
Device Descriptor:                             
  bLength                18                     
  bDescriptorType         1                     
  bcdUSB               2.00                     
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0                             
  bDeviceProtocol         0                             
  bMaxPacketSize0        64                             
  idVendor           0x0b48 TechnoTrend AG             
  idProduct          0x300a                             
  bcdDevice            1.01                             
  iManufacturer           1 TechnoTrend                 
  iProduct                2 TT-USB2.0                   
  iSerial                 3 LHIEKI                     
  bNumConfigurations      1   

231
Users / Re: Google Summer of Code (GSoC) - Ideas and Mentors Needed!!!
« on: March 21, 2010, 10:02:56 pm »
Idea

Baby phone

Description

Just put a camera / mic to monitor a child and notify the user (connected mobile or orbitor) when activity happens. Then you could see through the camera and maybe have 2 way voice/video if that is available in the room.

232
Marketplace / Re: For Sale: Cisco 7970G phones (EU) Including shipping!!
« on: January 10, 2010, 04:42:50 pm »
Nobody such a beautiful phone for a special price??

233
Marketplace / Re: For Sale: Cisco 7970G phones (EU) ONLY 175 EURO!!
« on: December 03, 2009, 11:36:52 am »
still some left...

who want one? ;-)

234
Marketplace / Re: WebDT 366 (EU) only 250 EURO!!!
« on: December 03, 2009, 11:35:50 am »
sold.

235
Users / Re: Android Orbiter
« on: November 24, 2009, 09:08:06 pm »
Might already been thought of or maybe impossible or something but I was thinking:

Why not add the possibility to control the MD with an android phone by the accelerometer? Just like it was a gyro mouse.

236
Marketplace / Re: For Sale: Cisco 7970G phones (EU) ONLY 175 EURO!!
« on: November 13, 2009, 03:08:12 pm »
you an amazing phone for only 175 euro and I a happy gf!

=)

237
Marketplace / Re: WebDT 366 (EU) only 250 EURO!!!
« on: November 13, 2009, 03:06:50 pm »
who wants this amazing item for this amazing price?

238
Users / Re: Adding new computing apps
« on: October 26, 2009, 01:55:03 pm »
this is not really the right place. I would try users or developers instead of feature request&roadmap

239
Marketplace / WebDT 366 (EU) Sold
« on: September 27, 2009, 11:11:46 am »
I'm selling a webdt 366 from tkmedia

(they're awesome but I prefer wired stuff =). I never really used it, only tried it out when I got it and now it's just eating up space. ).

240
Marketplace / Re: 4 Sale: WebDT 366 (EU) 295 EURO incl shipping
« on: September 21, 2009, 03:57:19 pm »
Price is now including shipping to EU

Pages: 1 ... 14 15 [16] 17 18 19