I'm not sure I understand what you are suggesting.  I don't have any zwave devices listed in my device tree.  Are you talking about the template itself? If so, I don't know how to go about that.

Sorry, I missed the part about the IVR setting previously.  It was at 15 Seconds, which I assume was default.  I have set this to zero.

Just wanted to bump this.  Had not heard any recent progress.  I bought a serial port card to see if that may provide a temporary solution.  I'll be work with that next weekend.

@Buckle: yes, The Linksys adds an analog extension, not a POTS Trunk.

@los93sol: I only have one trunk.

Worth a shot.

Is there a reset to defaults option embedded some where?  I will give this a shot when I get a chance, but is suspect a low probability of any progress.  Reason being that I have received calls from Gizmo5, only they go straight to the default voice mail. The linksys phone receives a dial tone and the asterisk system talks to me.  I believe this is an internal asterisk issue since the Core/Hybrid and the MD can not call each other.

There shouldn't be a network related issue to the problem.  Have you tried pinging your MD from the core looking for dropped packets.  However, Unless your passing a lot of traffic across your switch I doubt that there is a network problem.

Although the functionality on my system is broken at this time....You should be able to connect your cable box to the system and use you tuner to view TV on any system in the house.  Two cards would be needed to view two shows at the same time (You would also require two cable boxes).

For the Linksys I followed this Wiki:

http://wiki.linuxmce.org/index.php/Linksys_SPA3102

It enables me to have a regular phone connect to the asterisk system.  For Gizmo5, I followed the following wiki.

http://wiki.linuxmce.org/index.php/Gizmo

In theory, This enables me to make outgoing phone calls via Gizmo5, I do have credit on the service to make calls.  Thank you for taking an interest in my issue.  Do have any advice?

Wanted to bump this.  I'm hoping progress was made in the interim.

I recently configured a "Linksys SPA3102" to connect to asterisk.  I also configured LMCE to utilize my Gizmo5 as my provider.  My "Linksys SPA3102" reports registered, as does LMCE to Gizmo5.  However, much of the core functionality does not seem to be working.  All calls in to the system have been going directly to the default voice mail.  Local extension do not seem to be able to call each other, and outbound calls return "All Circuits are busy."  I'm hoping that there is something simple is missing, but most things in LMCE seem to take unusual lengths to get working.

Thanks, going to give this a try.

Yeah, looks like a Euro thing.

Any update on the next release?  I'm interested in that authentication option.

Wanted to bump this. I still haven't gotten this working.  Worse, I don't have any leads to follow.  I've checked all the logs I know of, but I may be unaware of where the ones I need are.  Does anyone have any Ideas on how to track down a solution?