Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - valent

Pages: 1 ... 23 24 [25] 26
361
Users / Anybody using NVidia Geforce TI 4200
« on: November 25, 2008, 12:07:07 am »
Please tell me how you made Nvidia GeForce 4200 Ti to work because I'm having issues using this graphic card :(
I install latest nvidia drivers and switch from "nv" to "nvidia" driver and then X fails to start :(

I have LCD 1280x1024 display. Here is my xorg.conf - http://fpaste.org/paste/768

Any help is appreciated.

Cheers,
Valent.

362
Installation issues / Re: It can be done!
« on: November 25, 2008, 12:02:26 am »
Please tell me how you made Nvidia GeForce 4200 Ti to work because I'm having issues using this graphic card :(((

I install latest nvidia drivers and switch from "nv" to "nvidia" driver and X fails to start :(

363
Developers / Re: ATI Radeon 9600
« on: November 17, 2008, 09:19:44 pm »
User questions go into the user section. ::)

Sorry, these were "sort of" developer questions. Please move this thread to user section if feel it should go there.

364
Developers / ATI Radeon 9600
« on: November 17, 2008, 04:54:05 am »
Hi,
I tested ATI Radeon 9600 but have no luck with it because. I installed latest fglrx drivers and LinuxMCE UI still doesn't work with it (except the simple UI).

When testing video capabilities of video card with this guide:
http://wiki.linuxmce.org/index.php/Graphics_Test
Masking works but when I try compositing video testing app just crashes.

I made new wiki entry:
http://wiki.linuxmce.org/index.php/ATI_Radeon-9600-AGP

Is there a hope of getting this video card working with UI2?

Chould I report a bug? Troubleshoot some more (how)? Give up?

Is there any hope this card will work better in new LinuxMCE 0810?

Any tips/tricks appreciated.

365
Developers / Re: Building for 0810
« on: November 17, 2008, 04:17:04 am »
Hi guys,
I'm also looking at testing the new LinuxMCE so I would like to ask you who are doing it now to please update the wiki with some tips&tricks (it needed) so that the rest of us can also give it a shot and skip over any caveats.

Cheers,
Valent.

366
Users / Re: core drops ssh, ping and webmin connections! why?
« on: November 08, 2008, 04:04:19 pm »
Is there some FAQ expaining what all is changed and why some things like iptables are chenged, how pluto software affects all other linux subsystems, etc...

367
Users / Re: Creating a FAQ
« on: November 05, 2008, 10:33:11 pm »
There are some great tips here:
http://linuxmce.wordpress.com/

that would be great for users to see also in the wiki, like how to custom partition the hard drive...

368
Users / Re: core drops ssh, ping and webmin connections! why?
« on: November 05, 2008, 10:21:16 pm »
Does LinuxMCE use some other mechanism other than iptables for firewall?

My understanding was if I flush all iptables rules it would be the same as turning it off from web interface. Why am I wrong?

369
Users / Re: core drops ssh, ping and webmin connections! why?
« on: November 05, 2008, 04:18:24 pm »
I found it myself 10 minutes after posting the question ;)
I know the security issue, but I'm behind a NAT and openning the firewall posts no security issue for me.

But I was puzzled why when I flushed manually iptables rules the firewall still functioned! How is that possible?

370
Users / core drops ssh, ping and webmin connections! why?
« on: November 04, 2008, 10:22:15 pm »
Hi, I need to connect via ssh to my core but I cant. I tried pinging it and I get no reply. I have ktorrent running with web interface and can only connect it from core not from other laptop in my LAN. Why?

Core has two LAN cards;
eth0 - 10.10.1.1/24 that has nothing connected to it and has DHCP service ready to assing IP adreses
eth1 - 192.168.5.5 - the IP it how automatically from ADSL modem/router that it  is connected to.

I have other laptop (192.168.5.7) connected to same ADSL router but over over wireless.

When I ping laptop from core I get the response, when I ping core from the laptop I get no response.

I start ssh on core and on the laptop, and I can connect from core to laptop but I can't connect from laptop to core.

I tried deleting all iptables firewall rules with:
iptables --flush
iptables --table nat --flush
iptables --delete-chain
iptables --table nat --delete-chain

but I still can't ping or connect via ssh to core from my local LAN.

How can I fix this?

Cheers,
Valent.

371
Users / Re: Got my LinuxMCE running, but...
« on: October 27, 2008, 06:57:20 pm »
Set it up from the mythtv-setup in the computing screen.

I installed mythtv package, it looks like it was missing. Now I have mythtv-setup so I'll play around with that.

Valent.

372
Users / Re: Got my LinuxMCE running, but...
« on: October 27, 2008, 06:28:42 pm »
Hi again,

You can add any apps you like to the Computing menu... see here;

http://wiki.linuxmce.org/index.php/Adding_new_computing_apps

All the best

Andrew

I don't get this tutorial (and I'm not a newbie), what are you supposed to do after you get WM_CLASS property. This wiki page seams unfinished and unclear. I got that WM_CLASS property but where do I enter it?

373
Users / Re: Got my LinuxMCE running, but...
« on: October 27, 2008, 11:29:55 am »
Hi Valent,

The failure on deb.linuxmce.com is normal dont worry about it.

Ctrl + Alt + F2 (or other Fn keys) will open a Term session for you... just enter your password and then use sudo as normal etc.

look here for info on support for your DVB card under Linux; http://www.linuxtv.org/wiki/index.php/DVB-T_Devices

All the best

Andrew

Thank you Andrew. I know about VT1-6 but I'm asking if there is a way to start konsole or xterm from LinuxMCE gui somehow?

I don't see my gigabyte card nowhere on linuxtv.org but as soon as I get it working I'll update their wiki pages.

Cheers,
Valent.

374
Users / Re: Got my LinuxMCE running, but...
« on: October 27, 2008, 11:24:37 am »
Set it up from the mythtv-setup in the computing screen.

Hi Zaerc, thank you for your answer. Sorry for being too vague, I'll try to explain all the details.

I roamed the forums and I saw suggestions of using mythtv-setup but to my surprise I from terminal I didn't find any myth execfiles. I tied typing "my" and then hitting TAB key to get all the mythtv exec files but I got none! I also tried with "sudo my" and "sudo myth" +TAB and also nothing.

Then I thought that maybe during the instal I failed somehow to install mythtv component.

That is why I tried to check this with "apt-get update" and then "apt-get install mythtv"

But I also got stuck emediatly with apt-get update showing me errors...

How can I check that I have installed all necessary mythtv files? Sorry for this lame question but I primarily use fedora and don't know the apt-get way of things so much :(

Cheers,
Valent.

375
Users / Re: Got my LinuxMCE running, but...
« on: October 26, 2008, 07:55:18 pm »
Any suggestion how to test my dvb tv tuner? I see from dmesg output that it is recognised but LinuxMCE wizard doesn't show it...

Strange.

Pages: 1 ... 23 24 [25] 26