Yes, pan & zoom and else are not yet implemented.
It is my first DT and have put the minimum required for making snapshots.
I'll try to add them this weekend.

Greetings

The mac range was missing so I have re check-in it.

I sent the missing parameters in case they can be added to the previous DT.

If not, tell me what I can do to.

Well, something is wrong.

I have no more the same device template number I create and I've lost some camera parameters.

Can you tell me how to remove a wrong device template ? (I have 2405 and 2253 for the same camera)

If necessary I will re create a new device template for the D-Link DSC-7110.
Mac range was create but I not select it for the check-in (mistake).

Well, I have just done a anonymous check in for this DT.

Hoping to have it done properly ....;-)

Hi Posde,

As I mentioned earlier, my sURL worked with zoneminder, and I did not think to look in the zm wiki.

It's a pity that this information is not in the documentation of the D-Link camera, I have saved time and you will not bother with that. ;-)

Thank's a lot for your search, now I can snap picture !

Greetings,

Philippe

Humm..

It does not seem possible to obtain true jpeg. I can get H264, MPEG-4 and JPEG (but it's MJPEG) images.

It only remains for me to hope that one day this template accept MJPEG. ;-)

Thank you for your response.

I forgot to mention that I had previously configured the camera with the "Generic IP Camera" template and then with motion.
But no picture and the same "Camera screenshot not available" with the lmce-admin security view camera :-(.

My configuration seems correct and if i use the sUrl "http://192.168.80.132:80/video3.mjpg" with a web browser I have my image.

Nobody can help me ?

Philippe

I don't find why I have no image with a D-Link DCS-7110 IP camera on Linuxmce 1004.

The camera work perfectly with Zoneminder.

I have create a new template based on Sambuca Advanced_IP_Camera device template.
But no success.
When I start manually this device it give me this logfile:

Code:

linuxmce@dcerouter:~$ sudo /usr/pluto/bin/Advanced_IP_Camera -d 166
[sudo] password for linuxmce:
Advanced_IP_Camera, v.2.0.0.45.12121426939
Visit www.plutohome.com for source code and license information

10      03/24/13 14:42:41.897           Device: 166 starting.  Connecting to: dcerouter <0xb778d6f0>
10      03/24/13 14:42:41.909           Setting timeout for socket 3 to 20 <0xb778d6f0>
10      03/24/13 14:42:42.006           getConfig() Configuration =  <0xb778d6f0>
10      03/24/13 14:42:42.006           getConfig() parameters.size = 0 <0xb778d6f0>
10      03/24/13 14:42:42.007           getConfig() Children: <0xb778d6f0>
05      03/24/13 14:42:42.007           m_vectEventMethod.size() = 5. Configured EventMethods: <0xb778d6f0>
05      03/24/13 14:42:42.007           m_mapPK_Device_OutputDevice.size() = 0. Configured OutputDevices: <0xb778d6f0>
10      03/24/13 14:42:42.018           Connect OK <0xb778d6f0>
10      03/24/13 14:42:42.018           Requesthandler 0x9aa0a38 (device: 166) runThread now running <0xb6f8bb70>
10      03/24/13 14:42:42.108           Receive string: MESSAGE 103            <0xb6f8bb70>
10      03/24/13 14:42:42.108           Received MESSAGE 103            0x9aa0a38 device: 166 <0xb6f8bb70>
10      03/24/13 14:42:42.108           Received Message type 1 ID 84 from 64 to 166 (device: 166) resp 1 <0xb6f8bb70>
10      03/24/13 14:42:42.108           CMD_Get_Video_Frame: sUrl: http://192.168.80.132:80/video3.mjpg <0xb6f8bb70>

Is there something I have missed ?

Greetings,
Philippe

Hi Phenigma,

Even if it is not yet automatic, it works and simplifies configuration !!

Squeezeslave work again and I suggest, L3mce, to test it because it is a nice solution to have synchronized audio in rooms. ;-)

Thank's again for your reactivity and help.

Maybe it is because I have no media director on the Core and so have not setup video and audio ?

Hi

I have add the Multichannel sound card #2241 on the Core but have a "No sound cards found" in the device data parameters.

My asound.conf is the ITS audio profile that LMCE give me (same as yesterday) and my /etc/pluto/alsa/vitual_cards.conf is empty.

Do I miss something ?

Hi Phenigma,

Great !

I have paste my old config (first pastebin) into /etc/pluto/alsa/virtual_cards.conf, and let the LMCE ITS audio profile.
It is a progress but the -o parameter (audio device) is always missing and if I reboot the core, I retrive a empty virtual_cards.conf :-(.

I know about Dianemo Device Template #1994 and have use it before.
But it is actually missing on linuxmce 10.04 so I have to manually recreate the virtual cards.

Thank's for your help.

The asound.conf that worked before the new audio sheme:

http://pastebin.com/v1NAqujj

For information I have 2 sound cards and only use the M Audio for squeezeslave on the core.
I don't have a media director on the core.

The new asound.conf after the new audio sheme.

http://pastebin.com/SP48tBdt