Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - pga57

Pages: [1] 2 3 ... 10
1
Installation issues / Re: Intel NUC D54250WY problem
« on: November 20, 2014, 03:11:55 pm »
Ok, I can now connect to the session, thank's.

Strange things, I have a "ffmpeg_video_dec: VAAPI Enabled disabled by driver." !

Code: [Select]
ffmpeg_video_dec: VAAPI Enabled disabled by driver.
load_plugins: plugin ffmpegvideo will be used for video streamtype 4d.
load_plugins: plugin dts will be used for audio streamtype 05.
demux_matroska_chapters: Edition 0xf49e8a4f374b58a2: not hidden, not default, not ordered. 12 chapters:
demux_matroska_chapters:  Chapter 1: 0-0(pts), 00:00:00.000 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 2: 30952530-0(pts), 00:05:43.917 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 3: 64350000-0(pts), 00:11:55.000 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 4: 108033750-0(pts), 00:20:00.375 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 5: 145083780-0(pts), 00:26:52.042 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 6: 178901280-0(pts), 00:33:07.792 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 7: 222165000-0(pts), 00:41:08.500 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 8: 261487530-0(pts), 00:48:25.417 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 9: 320733720-0(pts), 00:59:23.708 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 10: 357228720-0(pts), 01:06:09.208 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 11: 393997500-0(pts), 01:12:57.750 (eng). not hidden, enabled.
demux_matroska_chapters:  Chapter 12: 416313720-0(pts), 01:17:05.708 (eng). not hidden, enabled.
set_speed 1000000
xine_play
ao_flush (loop running: 1)
ffmpeg_video_dec: direct rendering enabled
ffmpeg_video_dec: color matrix #2 [undefined]
audio_alsa_out:open pause_resume=0
output sample rate 48000
audio discontinuity #2, type is 3, disc_off 7650
waiting for in_discontinuity update #2
video_out_xshm: b 0 c 128 s 128 [ITU-R 709 / HDTV]
ffmpeg_video_dec: flushed out and displayed 1 frames.
load_plugins: plugin sputext will be used for spu streamtype 06.
video discontinuity #2, type is 3, disc_off 7650
vpts adjusted with prebuffer to 1636800994
audio jump, diff=0
fixing sound card drift by -1425 pts
metronom: video jump by -6195 pts
play_internal ...done
200 frames delivered, 3 frames skipped, 0 frames discarded
ffmpeg_video_dec: increasing buffer to 208896 to avoid overflow.



This is why the CPU usage is high ?

Code: [Select]
                                                                         
top - 15:09:11 up 23:59,  1 user,  load average: 0.35, 0.38, 0.41
Tasks: 183 total,   2 running, 181 sleeping,   0 stopped,   0 zombie
Cpu(s): 15.2%us,  2.2%sy,  0.0%ni, 81.0%id,  1.2%wa,  0.0%hi,  0.4%si,  0.
Mem:   4061648k total,  1159104k used,  2902544k free,        0k buffers
Swap:        0k total,        0k used,        0k free,   894260k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND     
 6259 root      20   0  309m 172m 112m S   52  4.3   9:29.45 Xine_Player 
 3106 root      19  -1  244m 134m 127m S    6  3.4  36:10.40 Xorg         
 6817 root      20   0  171m  35m 9076 S    2  0.9   7:28.04 OrbiterGL   
 6191 root      20   0 68668  13m  12m S    1  0.4   1:31.86 Picture_Viewe
    1 root      20   0  3656 2088 1324 S    0  0.1   1:25.32 init         
    9 root      20   0     0    0    0 S    0  0.0   2:37.89 rcu_sched   
   18 root      20   0     0    0    0 S    0  0.0   1:01.24 ksoftirqd/2 
   36 root      20   0     0    0    0 S    0  0.0   0:11.55 khubd       
 2327 root      20   0 14968  12m 1136 S    0  0.3   3:05.12 StorageDevice
 2548 root      20   0  3880 2060 1124 S    0  0.1   0:14.96 Gamepad_Detec
 6196 root      20   0 37264 3800 2932 S    0  0.1   0:02.19 MythTV_Player
 6489 root      20   0  144m  11m 5120 S    0  0.3   1:19.02 SimplePhone 
 7408 root      20   0  4184 2380 1140 S    0  0.1   0:23.96 Restart_MythB
 7495 root      20   0     0    0    0 S    0  0.0   0:00.22 kworker/1:0 
10883 root      20   0  2852 1172  872 R    0  0.0   0:00.11 top         

How to correct this ?

Greetings,
Philippe

2
Installation issues / Re: Intel NUC D54250WY problem
« on: November 20, 2014, 12:19:30 pm »
I finally decided to try again to install the Intel Nuc I5 following the instructions of Thom.
Here it is, the Intel Nuc work.

By against my cpu usage is close to 45% for a simple 720p file.
I have yet configured to use the MD acceleration vaapi and I installed xserver-xorg-lts-saucy and libva-intel-vaapi-driver.

How can I connect to Xine_Player's screen session ?
Is something to do with mplayer ? Because my CPU usage is over 80% for a blue ray video !

Thank's
Philippe

3
Users / Re: Last lmce-squeezeslave update give me an error
« on: October 09, 2014, 05:17:43 pm »
Yes I am also surprised that it does not work properly.

I tested a few parameters (-a 200 for example) but without success yet.

And it's not sync the problem, I have the same without it.

I'll keep looking.

Philippe

4
Users / Re: Last lmce-squeezeslave update give me an error
« on: October 09, 2014, 08:22:54 am »
The load does not seem to increase much and always remains below 0.60 (and 4 squeezelites playing).

Code: [Select]
top - 08:10:13 up 17:44,  1 user,  load average: 0.52, 0.45, 0.50
Tasks: 230 total,   2 running, 228 sleeping,   0 stopped,   0 zombie
Cpu(s):  4.4%us,  3.1%sy,  0.0%ni, 91.8%id,  0.5%wa,  0.0%hi,  0.2%si,  0.
Mem:   3356596k total,  2585428k used,   771168k free,   183132k buffers
Swap:  9828348k total,     1260k used,  9827088k free,  1424600k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND     
22088 www-data  20   0 58660  19m 3232 S    4  0.6   6:50.76 apache2     
20862 root      20   0 33996  31m  13m S    2  1.0   9:21.76 squeezelite 
20121 root      20   0 33996  31m  13m S    2  1.0   9:19.53 squeezelite 
20266 root      20   0 33996  31m  13m S    2  1.0   9:26.43 squeezelite 
20680 root      20   0 33996  31m  13m S    2  1.0   9:29.88 squeezelite 
 2049 squeezeb  20   0  102m  86m 5540 R    2  2.6   2:32.60 squeezeboxser
 2475 mythtv    20   0  437m  59m  23m S    1  1.8  10:00.52 mythbackend 
 3823 root      20   0 15224  13m 1168 S    1  0.4   7:14.35 StorageDevice
17432 root      20   0 1915m  66m  12m S    1  2.0   4:12.32 DCERouter   
10304 linuxmce  20   0  2852 1332  976 R    1  0.0   0:00.29 top         
19894 root      20   0 56372 4728 3112 S    1  0.1   1:22.82 ZWave       
  383 root      20   0     0    0    0 S    0  0.0   1:32.30 jbd2/sda1-8 
  734 root      20   0  3364 1608  804 S    0  0.0   0:11.19 udevd       
 1942 mysql     20   0  566m 249m 7276 S    0  7.6  76:33.30 mysqld       
 2116 root      20   0     0    0    0 S    0  0.0   1:30.39 nfsd         
 2317 ntp       20   0  5748 2028 1572 S    0  0.1   0:02.42 ntpd         
 9138 root      20   0     0    0    0 S    0  0.0   0:00.79 kworker/0:2 
17990 root      20   0  3372 1180  368 S    0  0.0   0:12.95 udevd       
20136 root      20   0  4228 2428 1144 S    0  0.1   0:31.61 Restart_MythB
    1 root      20   0  3764 2188 1352 S    0  0.1   0:36.38 init         
    2 root      20   0     0    0    0 S    0  0.0   0:01.54 kthreadd     
    3 root      20   0     0    0    0 S    0  0.0   0:19.61 ksoftirqd/0 
    6 root      RT   0     0    0    0 S    0  0.0   0:07.12 migration/0 
    7 root      RT   0     0    0    0 S    0  0.0   0:00.34 watchdog/0   
    8 root      RT   0     0    0    0 S    0  0.0   0:04.08 migration/1 
    9 root      20   0     0    0    0 S    0  0.0   0:29.24 kworker/1:0 
   10 root      20   0     0    0    0 S    0  0.0   0:03.53 ksoftirqd/1 
   12 root      RT   0     0    0    0 S    0  0.0   0:00.16 watchdog/1   
   13 root      RT   0     0    0    0 S    0  0.0   0:03.11 migration/2 
   15 root      20   0     0    0    0 S    0  0.0   0:00.97 ksoftirqd/2 
   16 root      RT   0     0    0    0 S    0  0.0   0:00.22 watchdog/2   
   17 root      RT   0     0    0    0 S    0  0.0   0:03.83 migration/3 
   18 root      20   0     0    0    0 S    0  0.0   0:34.41 kworker/3:0

Maybe a buffer problem ?

Philippe



5
Users / Re: Last lmce-squeezeslave update give me an error
« on: October 08, 2014, 06:52:58 pm »
Hi Phenigma,

I use 4 squeezelite on the core:

Code: [Select]
top - 18:36:43 up  4:11,  1 user,  load average: 0.67, 0.64, 0.67
Tasks: 240 total,   2 running, 238 sleeping,   0 stopped,   0 zombie
Cpu(s):  2.3%us,  1.7%sy,  1.2%ni, 91.5%id,  2.9%wa,  0.0%hi,  0.4%si,  0.
Mem:   3356596k total,  1931364k used,  1425232k free,   199064k buffers
Swap:  9828348k total,        0k used,  9828348k free,   864168k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND     
 8434 root      39  19 99840  41m 6140 S    7  1.3  26:06.84 UpdateMedia 
 2459 www-data  20   0 50448  11m 3232 S    4  0.4   1:35.72 apache2     
 1942 mysql     20   0  564m 216m 7044 S    3  6.6  18:12.00 mysqld       
 2121 root      20   0     0    0    0 S    1  0.0   0:15.47 nfsd         
20121 root      20   0 33996  31m  13m S    1  1.0   2:16.78 squeezelite 
20680 root      20   0 33996  31m  13m S    1  1.0   2:20.93 squeezelite 
20266 root      20   0 33996  31m  13m S    1  1.0   2:15.90 squeezelite 
20862 root      20   0 33996  31m  13m S    1  1.0   2:10.75 squeezelite 
    9 root      20   0     0    0    0 S    0  0.0   0:07.45 kworker/1:0 
  383 root      20   0     0    0    0 S    0  0.0   0:23.24 jbd2/sda1-8 
 2116 root      20   0     0    0    0 S    0  0.0   0:23.22 nfsd         
 2117 root      20   0     0    0    0 S    0  0.0   0:32.06 nfsd         
 2118 root      20   0     0    0    0 S    0  0.0   0:15.92 nfsd         
 3929 root      20   0  3436 1708 1212 S    0  0.1   0:01.54 StorageDevice
17432 root      20   0 1912m  63m  11m S    0  1.9   0:58.91 DCERouter   
19894 root      20   0 56372 4700 3100 S    0  0.1   0:17.19 ZWave       
    1 root      20   0  3764 2188 1352 S    0  0.1   0:09.50 init         
    2 root      20   0     0    0    0 S    0  0.0   0:00.36 kthreadd     
    3 root      20   0     0    0    0 S    0  0.0   0:04.70 ksoftirqd/0 
    6 root      RT   0     0    0    0 S    0  0.0   0:01.46 migration/0 
    7 root      RT   0     0    0    0 S    0  0.0   0:00.08 watchdog/0   
    8 root      RT   0     0    0    0 S    0  0.0   0:01.19 migration/1 
   10 root      20   0     0    0    0 S    0  0.0   0:00.86 ksoftirqd/1 
   12 root      RT   0     0    0    0 S    0  0.0   0:00.03 watchdog/1   
   13 root      RT   0     0    0    0 S    0  0.0   0:00.78 migration/2 
   15 root      20   0     0    0    0 S    0  0.0   0:00.23 ksoftirqd/2 
   16 root      RT   0     0    0    0 S    0  0.0   0:00.06 watchdog/2   
   17 root      RT   0     0    0    0 S    0  0.0   0:00.86 migration/3 
   18 root      20   0     0    0    0 S    0  0.0   0:00.00 kworker/3:0 
   19 root      20   0     0    0    0 S    0  0.0   0:00.57 ksoftirqd/3 
   20 root      RT   0     0    0    0 S    0  0.0   0:00.04 watchdog/3   
   21 root       0 -20     0    0    0 S    0  0.0   0:00.00 cpuset       
   22 root       0 -20     0    0    0 S    0  0.0   0:00.00 khelper     

I think that the power is enough:

Motherboard: Gigabyte  GA-P35-DS3L
Processor: Intel duo Quad 9300
RAM: OCZ Dual Channel Platinum XTC, DDR2 PC2-6400, Cas 4 (2 x 2 Go)

I mean that the track skip allways few ms in the song and throughout all the track (and no silence).
The original tempo is disturbed (sorry but I can not get a better explanation in English ;-)).

Philippe



6
Users / Re: Last lmce-squeezeslave update give me an error
« on: October 08, 2014, 05:59:02 pm »
It is like some parts of the songs are missing for few ms and that all 2 or 3s in the song !
Like I said, it is strange to describe.

7
Users / Re: Last lmce-squeezeslave update give me an error
« on: October 08, 2014, 02:13:29 pm »
Hi Phenigma and Posde

It's ok now but I had to remove lmce-squeezeslave before installing the new package.

I just have another problem. The sound seems as if we had cut off pieces of melody (hard to describe for me ;-)).
I tried with web radio and music in .flac, .mp3. Same result.


I sync the same sound in three rooms. It worked very well with squeezeslave.
Maybe a missing parameter ?

Greetings
Philippe
 

8
Users / Re: Last lmce-squeezeslave update give me an error
« on: October 08, 2014, 07:46:58 am »
Hi,

I have done apt-get update && apt-get dist-upgrade this morning gand allways have the same error.

Apparently lmce-squeezeslave package is not yet corrected.

Philippe

9
Users / Re: Last lmce-squeezeslave update give me an error
« on: October 07, 2014, 10:06:43 am »
Oh yes, sorry...

Code: [Select]
linuxmce@dcerouter:~$ sudo LC_ALL=C apt-get -f install
[sudo] password for linuxmce:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up lmce-squeezeslave (2.0.0.46.14100429520) ...
Adding 'diversion of /etc/init.d/squeezelite to /usr/pluto/diversions/squeezelite.distrib/etc/init.d/squeezelite by lmce-squeezeslave'
dpkg-divert: error: error checking '/usr/pluto/diversions/squeezelite.distrib/etc/init.d/squeezelite': No such file or directory
dpkg: error processing lmce-squeezeslave (--configure):
 subprocess installed post-installation script returned error exit status 2
No apport report written because MaxReports is reached already
                                                              Errors were encountered while processing:
 lmce-squeezeslave
E: Sub-process /usr/bin/dpkg returned an error code (1)

Thank's

10
Users / Last lmce-squeezeslave update give me an error
« on: October 07, 2014, 09:16:20 am »
Hello,

Last lmce-squeezeslave update give me an error:

Code: [Select]
Paramétrage de lmce-squeezeslave (2.0.0.46.14100429520) ...
Ajout de « détournement de /etc/init.d/squeezelite en /usr/pluto/diversions/squeezelite.distrib/etc/init.d/squeezelite par lmce-squeezeslave »
dpkg-divert : erreur : erreur lors de la vérification de « /usr/pluto/diversions/squeezelite.distrib/etc/init.d/squeezelite »: No such file or directory
dpkg : erreur de traitement de lmce-squeezeslave (--configure) :
 le sous-processus script post-installation installé a retourné une erreur de sortie d'état 2
Des erreurs ont été rencontrées pendant l'exécution :
 lmce-squeezeslave
E: Sub-process /usr/bin/dpkg returned an error code (1)


The squeezelite.distrib dir location don't exist.

Greetings
Philippe



11
Installation issues / Re: Intel NUC D54250WY problem
« on: June 12, 2014, 11:19:30 am »
Hum...

It seems that something is missing in the instructions.

I have install linux-generic-lts-saucy kernel on core and not linux-generic-lts-trusty because I assumed that it was a mistake ?!

I redid a full installation with update, dist-ugrade, Diskless_BuildDefaultImage.sh and Diskless_CreateTBZ.sh.

After a long time ;-) I had to insert a noapic nolapic in the tftpboot default file (without I have a kernel panic).

NUC I5 boot but after the Diskless_Setup it does not go to the AV Wizard. I only have the kde logo boot splash and nothing append (after 1 hours !).

I have install another MD (Zotac HD41) without problem.

I have look the NUC I5 logs but nothing explains what happens. It is like it is frozen and I can not log on it via ssh.

Sorry but for now I have no idea what I have to do :-(

Greetings
Philippe


12
Installation issues / Re: Intel NUC D54250WY problem
« on: June 09, 2014, 07:59:30 am »
Hello Thom,

I am eager to know your "diagnostic"! ;-)

Greetings
Philippe

13
Installation issues / Intel NUC D54250WY problem
« on: June 05, 2014, 10:56:27 am »
Hi,

I have a problem for using a Intel I5 NUC as MD on LinuxMCE 1204.
It give me a kernel freeze on boot.

I have insert a noapic in the tftpboot default file.
This is a little better but it still ends up with a kernel panic.

I've try to boot this NUC with a usb kubuntu 12.04.3 (i386) and have no problem.

I do not know what else to try.

Any idea ?

Greetings
Philippe



14
Users / Re: Audio over HDMI does not work anymore
« on: December 31, 2013, 08:51:18 am »
Hi,

I have no doubt that the changes needed to improve the system but for now it does not work for me. ;-)

Here the asound.conf for the 2 MDs:

Ion:
Code: [Select]
root@moon90:~# cat /etc/asound.conf
</etc/pluto/alsa/virtual_cards.conf>

pcm_slave.hdmi_convert48k {
        pcm "plughw:0"
        rate 48000
}

pcm.hdmi_playback {
        type plug
        slave hdmi_convert48k
}

pcm.asym_hdmi {
        type asym
        playback.pcm "hdmi_playback"
        capture.pcm "plughw:0"
}

pcm.!default asym_hdmi


Ion2:
Code: [Select]
root@moon20:~# cat /etc/asound.conf
</etc/pluto/alsa/virtual_cards.conf>

pcm_slave.hdmi_convert48k {
        pcm "plughw:"
        rate 48000
}

pcm.hdmi_playback {
        type plug
        slave hdmi_convert48k
}

pcm.asym_hdmi {
        type asym
        playback.pcm "hdmi_playback"
        capture.pcm "plughw:"
}

pcm.!default asym_hdmi

I've join the irc linuxmce channel (pga57)

Thank's for your help.

Philippe

15
Users / Re: Audio over HDMI does not work anymore
« on: December 30, 2013, 10:55:13 am »
Hi,
aplay -l give me:

Ion motherboard
Code: [Select]

**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


Ion2 motherboard:
Code: [Select]
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


Pages: [1] 2 3 ... 10