Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - extremeshannon

Pages: 1 [2] 3 4
Users / Re: Adding Drives in LinuxMCE 810 Raid or not having problems
« on: October 14, 2009, 04:27:37 am »
Thanks for the response. I only put 1 HD in to see if it would reconize it and let me use it. I have check the reconfigure device and tried restarting. I have not been creating my raid then letting LCME find it. LCME created my raid for me. The raid I had in my machine came from my 710 box and worked great every time I put back in the 710 box. I broke the raid apart in hope that 810 would build it correctly.

Has anyone got 810 to use a HD correctly. I would like to use Raid0 just for the large space. Any help would be great and if anyone else is having problems post here and let see what is going on.

Users / Adding Drives in LMCE 810 Raid or not having problems
« on: October 14, 2009, 12:14:25 am »
Have recently gone to 810. I had 1 Raid 0 set-up in my 710 system. After my 810 was up and going I moved my raid over. I got LMCE web admin to see the raid, see the drives under the raid. Not able to see any files or add to. I pulled out my raid and put in my 710 box works great. After days of trying I decided to remove all my files and recreate the raid. After deleting the raid and trying to recreate I am not able to add my drives. Just not there in the drop down list. If I restart the Core it auto creates a raid 0 with the drives. Great but still not working. The raid is not online so I check that and even restart still nothing. When I go thru Samba and look at shares I see device ## as a share. Still not able to use. I have even just put 1 disk in and try to let LMCE use it. Something I see is "Raid Status 3" not sure what state that is? 0, 1, 2 or the numbers the tip tells me about. I did do a fdisk -1 forgot to keep the output before I removed the drives. It showed the Disks but stated the partitions where not usable or recognizable.

Code: [Select]
extremeshannon@dcerouter:~$ mount
/bin/mount: line 11: /var/log/pluto/umount-wrapper.log: Permission denied
rootfs on / type rootfs (rw)
none on /sys type sysfs (rw,nosuid,nodev,noexec)
none on /proc type proc (rw,nosuid,nodev,noexec)
udev on /dev type tmpfs (rw,mode=755)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
/dev/disk/by-uuid/93f4f32a-1282-461b-a3a9-9c8f7346f22b on / type ext3 (rw,relatime,errors=remount-ro,user_xattr,data=ordered)
/dev/disk/by-uuid/93f4f32a-1282-461b-a3a9-9c8f7346f22b on /dev/.static/dev type ext3 (ro,errors=remount-ro,user_xattr,data=ordered)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=755)
varrun on /var/run type tmpfs (rw,nosuid,mode=755)
varlock on /var/lock type tmpfs (rw,nosuid,nodev,noexec)
tmpfs on /lib/modules/2.6.27-14-generic/volatile type tmpfs (rw,mode=755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,nosuid,noexec,gid=5,mode=620)
securityfs on /sys/kernel/security type securityfs (rw)
nfsd on /proc/fs/nfsd type nfsd (rw)

Users / Re: New 810 system
« on: October 03, 2009, 12:15:34 am »
This is what I have come up with so far. Any feeback would be great.

•   Intel PWLA8391GT 10/ 100/ 1000Mbps PCI PRO/1000 GT Desktop Adapter 1 x RJ45 - OEM
•   Seagate Barracuda 7200.10 ST380815AS 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - OEM
•   Gyration GYR3101US Universal Infrared / RF Remote Control
•   Hauppauge WinTV PVR-150 PVR150 PVR 150
•   Xantech 286M
•   Aeon Labs Z-Wave Interface with built-In Inclusion Remote
•   LITE-ON Black 4X BD-ROM 8X DVD-ROM 32X CD-ROM SATA Internal 4X Blu-ray Reader Model iHOS104-06 - OEM

Users / New 810 system
« on: October 02, 2009, 07:16:48 pm »
Good morning everyone. I am going to build a new 810 system next week. I would like to order the parts today. I have a few questions for anyone that has been using 810 on what hardware they are using. I have had problems with hardware compatibility before and would like to have a smooth transition this time. This will be a Hybrid with no MDs as of yet. There will be 2 -3 MDs when I get everything working.

1) Motherboard - As many sata connections as possible (I could put in a PCI-X SATA II Controller Card )
Dual Nic
HDMI would be nice but not needed,
Onboard video,
Intel or AMD.
I would like to be able to install several HD-5500 cards
2) Video Card if not on the motherboard.

Any help would be great

Users / Re: how is 810 coming along?
« on: September 07, 2009, 05:50:46 pm »
Awesome thanks Colinjones for the response. As soon as I have some free time at home I will upgrade.

Users / how is 810 coming along?
« on: September 06, 2009, 11:31:43 pm »
I haven't been on the boards for a while. I have been out enjoying Summer in Alaska. My Lmce box has been running great. I would like to use my new hardware and some of the new features of 810. Just curious how 810 is coming along and should I start using it.

Thanks for all the great work.

Users / Re: Help Compressing Video Files
« on: May 04, 2009, 06:52:21 pm »
Pigdog I was asking about Ripping DvD's that i have created over the years. There is no copyright issues with the DvD's I have. When I first started putting my videos on Dvd the format was large and has lots of extra stuff I want to get rid of.

Thanks everyone for the great advice.


Users / Re: Help Compressing Video Files
« on: May 03, 2009, 04:30:22 am »
Thanks colinjones I am going to start playing with Handbrake and see what happens

Users / Help Compressing Video Files
« on: May 03, 2009, 12:50:58 am »
I am looking for an easy solution to turn my DvD's into a more compressed format.I have hundreds of Dvd videos that I have created with menus and lots of extra stuff I do not want. When I let the Core rip them I get lots of extra. I have done some research and have tried lots of Window based programs, also I have tried some linux based programs but nothing that has wow'd me. If there is a better solution coming in 810 for this I can wait or if I have to do this on my desktop and transfer over to the core that would be great to. Any help would be great.

I think this is a great idea. I would toss in 100 to start the pot off. I would like to see everything set up first. See who is controlling the pot, list of Ideas for Development, etc..

I think as far as voting rights it should be who donates get proirity over those who don't.  But the Amount shouldn't matter. Some prople can afford more than others and should have the right to vote as much as the other person.

Just my thoughts :)

Sorry forgot about this. I just got around to this

You have sent $100.00 USD to


Users / Re: New 810 Install Hardware Advice please :)
« on: April 23, 2009, 10:11:44 pm »
The core I am building is the hardware from the Fiire Engine. Polywell is the company and I am buying it direct from them. So it is a Core/Nas has a controller card in it.

Users / Re: New 810 Install Hardware Advice please :)
« on: April 23, 2009, 07:17:32 pm »
Thanks everyone. I plan on making my purchases this coming month and here is what I have so far.

Core (lots of storage all in the core.)
Poly i7150 1333FSB uATX DVI/HDMI+VGA,gLAN,1394
Intel Core2 Duo E8400 3.0GHz 6MB CPU 1333FSB 65W
2GB 2xDDR2 667MHz 1G PC5300 Memory Unbuffered
TS900C ATX Tower Chassis (Black)
750W V2.2 EPS Power Supply Active PFC, 140mm Fan
500GB SATA-II 7200RPM HD 16MB Cache
12 Port SATA-II RAID-6 PCIex8 128M Controller
1 x Trayless SATA/SAS 2Bay-3Drive Cage(take 2x5.25")
2 x Trayless SATA/SAS 3Bay-5Drive Cage(take 3x5.25")
DVD+/-RW Dual-Layer IDE Drive
On-board 7.1 3D Audio Sound
SPDIF Optical and Coax/RCA, Line in, mic Module
On-board Integrated Nvidia GeForce 7150 Graphics
Realtek Gigabit Ethernet PCI Card (Low-Profile)
On-Board Gigabit/100/1000T Ethernet
2 x pcHDTV HD-5500

Media Director 1
EEE pc B202
No remote yet.

Users / Re: Fiire Invisible Replacement
« on: April 23, 2009, 06:57:47 pm »
Hello qkerby I have been doing some research on this since I wanted to buy a fire system myself. there are lots of good alternatives but if you want the fiire invisble the company that makes the hardware is Polywell. They do see all the hardware you might be looking for her is the link to the invisible.

They also sell the Fiire engine that I am buying form them this month myself. I plan on using EEE b202 for my first MD.


Users / Re: iPhone/iPod Touch Orbiter?
« on: April 23, 2009, 03:42:09 am »
I would gladdly buy the app or contribute

Pages: 1 [2] 3 4