OK Thanks. I will wait for next build or go back to the beta.

I am setting up a test core with the latest snapshot of 10.04 and it stops after the AVWizard with the following.
snapshot version 1004-201203181915

Code:

/etc/rc2.d/S99Linuxmce: line 153: [: : integer expression expected
/etc/rc2.d/S99Linuxmce: line 177: [: : integer expression expected
.....starts other services
/etc/rc2.d/S99Linuxmce: line 212: [: : integer expression expected
Starting LinuxMCE Launch Manager ... ok

AVwizard completes fine but no Sarah?

I have just had a similar problem and resolved it by using UI2 without transparency. Re-run the Av-wizard and change to UI2.

I have installed a DCS5300 IP Camera using the DCS5300G template but cannot get an image to display.  I have checked for the log after a reboot and cannot find one using either the web admin or in /var/log/pluto/ . I expected something for 85_?? as that is the device number it has been given. Any pointers where else to look for clues as to why it won't work would be appreciated.

gadget

I was also having problems on my MD's after the 0.23 update. I did an apt-get remove of mythtv-backend and mythtv-frontend and then an apt-get install and included pluto-mythtv-player. Make sure that your apt-sources is pinned to linuxmce. mysql will give a failure but mythtv will still work.

gadget

Dont know if it is related but see this thread.

forum.linuxmce.org/index.php?topic=9873.0

gadget

I am also getting this device detected and don't have any cameras yet.

gadget

Hi Thom,

The offending lines of code from Logger.cpp are

Code:

void WinOrbiterLogger::WriteEntry( Entry& entry )
{
    PLUTO_SAFETY_LOCK_LOGGER( sSM, m_Lock );  // Don't log anything but failures

struct tm *t = localtime((time_t *)&entry.m_TimeStamp.tv_sec);
char acBuff[50];
double dwSec = (double)(entry.m_TimeStamp.tv_usec/1E6) + t->tm_sec;

An access violation is thrown at "double dwSec" but the struct tm *t has errors which seems to  be defined in CommonIncludes.h.

where to next please?

OK. Thanks. next time i get some time i will manually install the backend and see what happens.

gadget

I have finally managed to get a development environment up using VS2010 and have successfully built the windows Orbiter in the base Orbiter folder and Win32_Pocketfrog version.

Both of them start the orbiter but generate an exception in main.cpp at the same point.

Code:

//It's safe now to use the logger
LoggerWrapper::GetInstance()->Write(LV_STATUS, "Device: %d starting.  Connecting to: %s",CmdLineParams.PK_Device,
CmdLineParams.sRouter_IP.c_str());

I am new to c++ so some pointers at where to look would be appreciated.

gadget

Hi Andrew,

I also thought that the MD was unable to connect to the master backend , but could use the mythtv usrname password in mysql to connect to myth database. I did notice that myth-backend isn't running on the MD. Does it need to be running.

I can also watch TV from a card on the backend so myth-frontend seems to be connecting to master backend.

gadget

Hi Dennis,

I have an HDPVR connected to my core and can watch eveything from component capture perfectly on the core. However when i watch from my MD the picture quality is poor and the sound is out of sync. Have you been able to watch from another machine successfully?

I have also got the same issue as you of not being able to configure myth on and MD but dont want to go through a re-install right now.

gadget

Hi Andrew,

I have a DVB card that is not PnP so have to manually configure it anyway. Everything is OK in Mythtv-setup but i can never play TV. I have moved it onto my core at the moment and it is working fine from there.

There is a forum post from some else who has just had the same issue with an HDPVR  which required a rebuild to resolve.
http://forum.linuxmce.org/index.php?topic=10087.0

gadget

If you want to run the AVwizard then just run the following command.

Code:

/usr/pluto/bin/RebootWithAVWizard.sh

gadget

What is the error that you are getting? Also is this on the core or an MD?

gadget