Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - patmankn

Pages: [1] 2 3 ... 6
1
Damn it... two more days before i can give it a testdrive! Thumbs up guys anyhow! ;O))

Pat


2
Users / Re: Huluplayer proxy
« on: August 05, 2010, 03:52:29 pm »
...well is there a solution to setup a route that says "if you want to go to a hulu-address (ip-range), use the vpn gateway (if not available, set up a vpn line), otherwise use the default gateway."

Is this a problem? Any of you already set up something like this?

Patrick

3
Users / Re: Easy way to update kernel for LinuxMCE 8.10
« on: June 18, 2010, 08:56:05 pm »
hmmm... well my HDD chrashed after some apt-get update && upgrade the other week. ;O/

4
Users / Re: DVB Cards info needed for Templates
« on: March 12, 2010, 08:39:33 pm »
Hey Mandingo,

i just did the shell stuff with my DVB-C Card, which is a KNC One btw.

KNC ONE:
Code: [Select]
pat@dcerouter:~$ sudo lspci -vn
01:05.0 0480: 1131:7146 (rev 01)
        Subsystem: 1894:0022
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at f9fffc00 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: budget_av
        Kernel modules: budget-av

pat@dcerouter:~$ sudo v4l2-ctl -n
Failed to open /dev/video0: No such file or directory

It looks the pretty same, except "Memory at f9fffc00 (32-bit, non-prefetchable) [size=512]" which does differ from Vikings post (viking: Memory at febff800 (32-bit, non-prefetchable) [size=512]) , on page 3 )

I still have big issues with stupid me, MythTV, DVB-C via unity-media cable... grrr.

@ Mandingo: did you create a template for the KNC one, as i could not find anything in your wiki page?

Hoping for help... ;O)

Pat

5
Users / Re: Call for Contributions for Fiire Chief support.
« on: March 10, 2010, 12:13:38 pm »
Well i DO care as thought there are some more Fiire Chief followers like myself. Hopefully the money is not "lost", just went up in other stuff ;O)

Patrick

6
Users / Re: LinuxMCE Users from Germany?
« on: February 10, 2010, 12:13:15 am »
good for you... these cold days right now stink! ;O(

7
Users / Re: LinuxMCE Users from Germany?
« on: February 09, 2010, 08:46:34 pm »
well ok , i skipped the linux Parties.. ;O)
Well i work in Hannover on a project, but live in Frankfurt. But this doesn't bring me any closer to munich ;O)
But there are some other german-based members: posde, hari etc..

8
Users / Re: LinuxMCE Users from Germany?
« on: February 09, 2010, 10:34:31 am »
Hey grind,

welcome on board... and YES, there are some german fellows ;O)
We are struggeling with Hardware, DVB(c) and other things...
There used to be an not that active german LMCE Board. I never published there.

Gruesse aus Hannover
Patrick

9
OK,
after the repos was fixed, i tried to re-run the mce-install.sh script. It ran fine,
but in the end i had to re-install from the very beginning, as the setup-wizard didn't show up,
so my setup was fubar.
Nevermind... as long as the missing package will be there again ;O)

Pat

10
Same here.
Just did a new install from repo and mce-install script stops at the pluto-orbiter ;O(
Hope its just a quick fix .

Patrick

11
Users / 8.10 Beta Black Screen on MD Video Playback
« on: January 06, 2010, 02:57:03 pm »
Hi @ all!
I just figured out to install my Zotac Ion 330 MD @ 1080p@60Hz.
The Screensaver is running fine, as i still need to figure out if i can run the MD with or without alpha blending ;O)
BUT... as i started to play any video like HD Stuff, DVD Iso or plain avi files, i just can hear the sound ...and see a black screen, no more. Does anyone have a slight idea what could resolve that?

Thanks for your help..

Pat

12
Users / Re: need some help with the phonebook
« on: January 05, 2010, 10:58:32 pm »
well i cannot explain the 9, but i guess 011 is the US Prefix for International codes. So i assume that the 9 is supposed to be some kind of dial-through-code. BUT... i have no clou where the digits come from... Good Luck! ;O)

13
Users / Re: DVB Cards info needed for Templates
« on: January 05, 2010, 10:49:18 pm »
Mandigo,

ok... in the MythTV Setup i saw sth. with LMCE Default... but i didn't know what to do with it ;O)
So i need to take a look at that as well.
But first, i need to fix my MythTV-cannot-scan-DVBC-with-UNityMedia-as-theprovider issue ;O(

pat

14
Users / Re: DVB Cards info needed for Templates
« on: January 05, 2010, 09:12:48 pm »
Mandigo,

sorry that i have to admit.... but you just rock! ;O)

As soon as i plugged in my cinerygy USB stick the Systems pops up and asks me what to do.
BUT... the systems offers two choices to install, but tells me "sorry, cannot find any provider for your country. You need to run MythTV Setup" (sth. like that).

Pat


15
Users / Re: Video Files: Need advice
« on: December 20, 2009, 10:22:23 pm »
I just want to throw in, that by converting the DVD to avi, you win space and will most of the time loose the "DVD-Experience" with specials, extras menues etc. which is supported by LMCE.
I would love to see some more support for Matroska files in the future, as these support all that stuff.
But for now LMCE does only support menues, multi-language etc via DVD.
Correct me, when i'm wrong.
I'm planning a bigger NAS just to hold my DVD-ISO... and i have to make sure, that my girlfriend wont kill me, when i tell her she needs to run 3 computers (nas, core, MD) just to watch a simple DVD ;O)


Pages: [1] 2 3 ... 6