Something new. I tried calling to hear the IVR but now, it's constantly busy, even after reboot

Thank you for your reply.
I'v confiured it to ring all extsions in any state of the phone system.

I'm on a fresh install of 10.04 dvd. The phone seems to be setup correctly with a spa -3201 analog line adaptor. Outgoing calls work with out a problem, but incomming calls are sent directly to ivr.
Can any one with this please?

What is the correct resolution to choose for the web orbiter, in order for it to display correctly on the Galaxy Tab 10.1 with out looking resizedvor streched etc.
I've tried just about anything I could think of but it lookes resized and slightly blurred

Thnx
Itsik

Just installed i and it works

Thank you so much for your efforts.
One thing tough. I have this one MKV that did not work before, now the video works great and even the subtitles. The only thing not working is the sound (which works as usual in other videos). The receiver doesn't even pickup he stream at first. After a minutes or so it suddenly switches to DTS, but still no sound is preasent.
In the web admin, the sound card is configures as HDA Nvidia and the AC3/DTS pass thru is checked.
Is there anyway to check what's going on ?

One more question, is there any way to control the font/encoding of the subtitles ?

Thnx again.
Itsik

First of all, no need to apologize and thanks for all you efforts
I tried what you suggested and it wants to uninstall just about everything:

Code:

root@moon49:~# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
  x11-apps sg3-utils mythtv-frontend pwgen libglib1.2ldbl libconvert-binhex-perl libtext-bidi-perl libsoap-lite-perl libmtp8 liblzo1
  mythtv-common xcompmgr xfonts-scalable libemail-find-perl lsof libgtk1.2 libcrypt-ssleay-perl pluto-sdl-helpers libnet-ssleay-perl
  libfame-0.9 libclass-methodmaker-perl libxml-perl pluto-confirm-dependencies mythtv-database libhtml-fromtext-perl x11-xfs-utils toolame
  libregexp-common-perl libpvm3 mysql-server-5.0 amarok-common lmce-windowutils libxml-twig-perl libexporter-lite-perl libfftw3-3 libsgutils1
  transcode-doc beep libmyth-0.23-0 libarchive-zip-perl libsox0 libossp-uuid-perl libsdl-sge pluto-avwizard-skin-basic libmime-tools-perl
  libxml-libxslt-perl xmltv-util libossp-uuid15 libnet-domain-tld-perl lmce-mythtv-scripts xfonts-75dpi ethtool libttf2 libxml-dom-perl xinput
  pluto-libresolution pluto-x-scripts wmctrl liblog-tracemessages-perl libhtml-tableextract-perl xloadimage mysql-server alsa-utils
  msttcorefonts libnet-ip-perl libhid0 libmjpegtools0c2a libnet-dns-perl pluto-hal-device-finder libtunepimp5 libifp4 cabextract xinit pvm
  mythtv-doc libdate-manip-perl libgpod3-nogtk x11-session-utils libhttp-cache-transparent-perl libwww-mechanize-perl libiso9660-5
  flashplugin-nonfree libsox-fmt-base libfs6 libgpod-common sox xfonts-100dpi libfile-slurp-perl liblingua-preferred-perl libgtk1.2-common
  libconfuse0 libxml-xpath-perl libfcgi-perl libunicode-string-perl libxml-writer-perl libasound2-plugins libsox-fmt-alsa alsa-base
  libemail-address-perl mjpegtools xorg linux-sound-base libio-socket-ssl-perl libxml-regexp-perl libdigest-hmac-perl libemail-valid-perl
  libquicktime1 libgraphicsmagick1 libxp6 libvcdinfo0 pluto-mcr-remote libxmltv-perl libnjb5 libterm-progressbar-perl libofa0 libmpeg2-4
  libdigest-sha1-perl
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  amarok amarok-engine-xine dragonplayer kubuntu-desktop libpostproc51 libxine-dev libxine1 libxine2 libxine2-dbg mythtv-backend
  phonon-backend-xine pluto-avwizard pluto-mythtv-player pluto-nvidia-video-drivers pluto-orbiter pluto-xine-player transcode xine-ui
0 upgraded, 0 newly installed, 18 to remove and 0 not upgraded.
4 not fully installed or removed.
After this operation, 146MB disk space will be freed.
Do you want to continue [Y/n]?

any idea whats next ?

thnx
Itsik

Thnx phenigma, but it still doesn't work

Code:

root@moon49:~/Desktop# dpkg -i lib*.deb
(Reading database ... 119962 files and directories currently installed.)
Preparing to replace libavcodec52 4:0.7.1.rc1-1ubuntu1~ph1 (using libavcodec52_0.7.1.rc1-1ubuntu1~ph1_i386.deb) ...
Unpacking replacement libavcodec52 ...                                                                             
Preparing to replace libavutil50 4:0.7.1.rc1-1ubuntu1~ph1 (using libavutil50_0.7.1.rc1-1ubuntu1~ph1_i386.deb) ... 
Unpacking replacement libavutil50 ...                                                                             
Preparing to replace libpostproc51 4:0.7.1~rc1-1ubuntu1~ph1 (using libpostproc51_0.7.1~rc1-1ubuntu1~ph1_i386.deb) ...
Unpacking replacement libpostproc51 ...                                                                             
Preparing to replace libxine-dev 1.2.0~hg20111113.2230-1yavdr1~intrepid (using libxine-dev_1.2.0~hg20111113.2230-1yavdr1~intrepid_i386.deb) ...
Unpacking replacement libxine-dev ...                                                                                                         
Preparing to replace libxine2-dbg 1.2.0~hg20111113.2230-1yavdr1~intrepid (using libxine2-dbg_1.2.0~hg20111113.2230-1yavdr1~intrepid_i386.deb) ...                                                                                                                                               
Unpacking replacement libxine2-dbg ...                                                                                                         
Preparing to replace libxine2-doc 1.2.0~hg20111113.2230-1yavdr1~intrepid (using libxine2-doc_1.2.0~hg20111113.2230-1yavdr1~intrepid_all.deb) ...
Unpacking replacement libxine2-doc ...                                                                                                         
Preparing to replace libxine2 1.2.0~hg20111113.2230-1yavdr1~intrepid (using libxine2_1.2.0~hg20111113.2230-1yavdr1~intrepid_i386.deb) ...       
Unpacking replacement libxine2 ...                                                                                                             
Setting up libavutil50 (4:0.7.1.rc1-1ubuntu1~ph1) ...                                                                                           

dpkg: dependency problems prevent configuration of libpostproc51:
 libpostproc51 depends on libavutil50 (<< 4:0.7.1~rc1-99) | libavutil-extra-50 (<< 4:0.7.1~rc1-99); however:
  Version of libavutil50 on system is 4:0.7.1.rc1-1ubuntu1~ph1.                                             
  Package libavutil-extra-50 is not installed.                                                             
dpkg: error processing libpostproc51 (--install):                                                           
 dependency problems - leaving unconfigured                                                                 
Setting up libxine2-doc (1.2.0~hg20111113.2230-1yavdr1~intrepid) ...
dpkg: dependency problems prevent configuration of libxine2:
 libxine2 depends on libpostproc51 (>= 4:0.6-1~) | libpostproc-extra-51 (>= 4:0.6-1~); however:
  Package libpostproc51 is not configured yet.
  Package libpostproc-extra-51 is not installed.
dpkg: error processing libxine2 (--install):
 dependency problems - leaving unconfigured
Setting up libavcodec52 (4:0.7.1.rc1-1ubuntu1~ph1) ...

dpkg: dependency problems prevent configuration of libxine-dev:
 libxine-dev depends on libxine2 (= 1.2.0~hg20111113.2230-1yavdr1~intrepid); however:
  Package libxine2 is not configured yet.
dpkg: error processing libxine-dev (--install):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libxine2-dbg:
 libxine2-dbg depends on libxine2 (= 1.2.0~hg20111113.2230-1yavdr1~intrepid); however:
  Package libxine2 is not configured yet.
dpkg: error processing libxine2-dbg (--install):
 dependency problems - leaving unconfigured
Processing triggers for man-db ...
Processing triggers for libc6 ...
ldconfig deferred processing now taking place
Errors were encountered while processing:
 libpostproc51
 libxine2
 libxine-dev
 libxine2-dbg

Any idea ?

I get an error trying to install the pluto-xine-player. I tried reinstalling the libavcodec52 once again (this time with no error in the end) but I still get the same error trying the install the pluto-xine-player

Code:

root@moon49:~/Desktop# dpkg -i pluto-xine-player_2.0.0.44.11110425106_i386.deb
dpkg: regarding pluto-xine-player_2.0.0.44.11110425106_i386.deb containing pluto-xine-player, pre-dependency problem:
 pluto-xine-player pre-depends on libxine2 (>= 1.1.90)
  libxine2 is not installed but configs remain.
dpkg: error processing pluto-xine-player_2.0.0.44.11110425106_i386.deb (--install):
 pre-dependency problem - not installing pluto-xine-player
Errors were encountered while processing:
 pluto-xine-player_2.0.0.44.11110425106_i386.deb

Trying to reinstall libxine2 gives me:

Code:

root@moon49:~/Desktop# dpkg -i libxine2_1.2.0~hg20111113.2230-1yavdr1~intrepid_i386.deb
Selecting previously deselected package libxine2.
(Reading database ... 119563 files and directories currently installed.)
Unpacking libxine2 (from libxine2_1.2.0~hg20111113.2230-1yavdr1~intrepid_i386.deb) ...
dpkg: dependency problems prevent configuration of libxine2:
 libxine2 depends on libpostproc51 (>= 4:0.6-1~) | libpostproc-extra-51 (>= 4:0.6-1~); however:
  Version of libpostproc51 on system is 3:0.svn20080206-12ubuntu3.3.
  Package libpostproc-extra-51 is not installed.
dpkg: error processing libxine2 (--install):
 dependency problems - leaving unconfigured
Processing triggers for man-db ...
Errors were encountered while processing:
 libxine2

What am I doing wrong ?

thnx
itsik

Thank you

Are they posted anywhere or can someone please upload them somewhere ?

Thnx
Itsik

Thnx possy.

Checked everything but can't see anything wrong with the definitions. It looks like the whole installation went bad because the system works vary slow and erratically, I think I'm going to reinstall and see what happens ...

Itsik

Thank you for your reply.
I did just that, but after some time it started pulling the setup files into the media list again.
Any idea what else could be causing this ?

thnx
itsik

For some reason, my video list shows all lmce setup videos and my photo screen saver pulles pictures from my own pic folder along side the flicker pics.
Any idea how to fix this ?

Thnx
Itsik

That's the plan. My basement is unfinished which gives me good access for wiring everything up.  The only issues I forsee is the lack of a local MD may make it difficult to use an RF remote and/or a bluetooth keyboard.

You can put your MD and even your sat-box in another room. Just run some Cat6 cables from your MD to your TV and connect a USB extender and an any no. of HDMI extenders to them. This will enable you to connect the TV to the MD and the sat-box using HDMI and use the USB extender to connect a keyboard, a remote and even a usb-uirt, gaining complete control of your TV, MD, Receiver and your Sat-box (it can sit next to the MD and use another HDMI extender, controlled by another usb-uirt) and anything else without having them in the room. You just need to figure out how many Cat6 cables you need according to the No. of extenders you need.

Hope this helps...

Sorry for the delay in the reply, but it took a little time to figure out what changes have been made to the relevant files, as none of the devs seemed to think it was necessery to add this patch into the code or even mention that there are changes that need to be made to the disc_drive files, thus rendering months of hard work practically useless.
Any way we are now in the final stages of testing a set of modified files for the current ver. 0810, which will be ready for beta testing in the next couple of days. If any one want's to help test them, please PM me.

Thnx
Itsik